Yamaha

collapse expand iconDescription

Housed in a rugged steel chassis, the MG10X CV can accommodate up to 10 inputs and offers a balanced stereo output. Featuring D-Pre discrete Class-A microphone preamplifiers for pristine sound, it includes an AUX bus for the built-in SPX effect with 24 presets and two channels of single-knob compression.

The MG10X can accept XLR, 1/4" phone and RCA-type pin jack inputs, and offers XLR and phone outputs. The MG10X offers rotary controls instead of faders, reducing the footprint for discrete placement onstage or anywhere space is a premium. A footswitch input allows hands-free effect muting.
Yamaha MG10X CV 10-Input Stereo Mixer With Effects
Yamaha MG10X CV 10-Input Stereo Mixer With Effects
Yamaha MG10X CV 10-Input Stereo Mixer With Effects

collapse expand iconFeatures

  • Discrete Class-A microphone preamps
  • Built-in SPX digital effects with 24 programs
  • Switchable +48V phantom power
  • Color-coded controls offer easy operation

collapse expand iconSpecs

General
  • Frequency response input to STEREO OUT: +0.5dB/-1.5dB (20Hz to 48kHz), refer to the nominal output level @ 1kHz, GAIN knob set to min
  • Total Harmonic Distortion (THD+N) input to STEREO OUT: 0.02 % @ +14dBu (20Hz to 20kHz), GAIN knob set to min
  • Crosstalk (1kHz): -78dB
  • Hum and Noise (20Hz to 20kHz)
  • Equivalent Input Noise: Crosstalk (1kHz)
  • Residual Input Noise: -102dBu (STEREO OUT, STEREO master knob set to min)
Input Channels
  • Mono [MIC/LINE]: 4
  • Mono/Stereo [MIC/LINE]: 0
  • Stereo [LINE]: 3
Output Channels
  • STEREO OUT: 2
  • MONITOR OUT: 1
  • PHONES: 1
  • AUX SEND: 1
  • GROUP OUT: 0
Bus
  • STEREO: 1
  • GROUP: 0
  • AUX SEND: 1 (incl. FX)
Input Channel Function
  • Pad (mono): 26dB
  • HPF (mono, mono/stereo): 80Hz, 12dB/oct (mono)
  • COMP (Mono)
  • 1-knob compressor (mono) (Gain/Threshold/Ratio) threshold: +22dBu to -8dBu
  • Ratio: 1:1 to 4:1
  • Output level: 0dB to 7dB
  • Attack time: Approx. 25 msec
  • Release time: Approx. 300 msec
  • EQ
  • High: Gain: +15dB/-15dB, frequency: 10kHz shelving
  • Mid: Gain: +15dB/-15dB, frequency: mono 250Hz–5kHz peaking, stereo 2.5kHz peaking
  • Low: Gain: +15dB/-15dB, frequency: 100Hz shelving
  • Peak LED (mono)
  • LED turns on when post-EQ signal reaches 3dB below clipping
Power
  • Phantom power voltage: +48V
  • Power requirements: PA-10 power adapter (included)
  • Power consumption: 22.9W
Other
  • Pre-monitor level meter: 2 x 7 segment LED meter [PEAK, +10, +6, 0, -6, -10, -20dB]
  • SPX algorithm: 24 programs
  • Dimensions (WxHxD): 9.6" x 2.8" x 11.6"
  • Net weight: 4.63 lb.

Featured Articles