Gallery
Description
Features
Specs
Reviews
Q&A

Videos (7)

View All
Shure SLX-D Digital Wireless Overview

Shure SLX-D Digital Wireless Overview

SLX-D How To: Set Up and Use

SLX-D How To: Set Up and Use

SLX-D How To: Add a Receiver

SLX-D How To: Add a Receiver

SLX-D How To: Lock and Unlock

SLX-D How To: Lock and Unlock

Shure

Description

SLX Wireless Systems like this SLXD14 combo system are powerful wireless tools that can be set up quickly and used confidently by installers and working bands. Features include auto frequency scan with transmitter setup, exceptional wireless clarity and Shure's patented Audio Reference Companding.

Includes WL93 lavalier microphone, SLX1 bodypack transmitter, SLX4 receiver, tie clip, rackmount kit, two 1/4 wave antennas, power supply, two AA batteries, protective bumpers with eight screws, vinyl bag and user guide.

Choose from one of three bandwidths:
G58: 470–514MHz
H55: 514–558MHz
J52: 558–616MHz
Shure SLXD14 Combo System With SLXD1 Bodypack & SLXD4 Receiver - Band G58
Shure SLXD14 Combo System With SLXD1 Bodypack & SLXD4 Receiver - Band G58
Shure SLXD14 Combo System With SLXD1 Bodypack & SLXD4 Receiver - Band G58

Features

  • 1 rackmount kit
  • 2 1/4 wave antennas
  • 1 power supply
  • 2 AA battery
  • 1 vinyl bag
  • Protective bumpers with eight screws
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Specs

SLX Working Range:
  • Line of Sight: 100 m (300')  (Note: Actual range depends on RF signal absorption, reflection and interference.)
Audio Frequency Response:
  • 45Hz–15kHz (Note: Dependent on microphone type)
Total Harmonic Distortion:
  • Ref. ±38kHz deviation with 1kHz tone, <0.5%, typical
Dynamic Range:
  • >100dB, A-weighted
Operating Temperature Range:
  • -18°C (0°F) to +50°C (122°F) (Note: Battery characteristics may limit this range.)
Transmitter Audio Polarity:
  • Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4" output
SLX1 Audio Input Level:
  • Gain position 
  • mic: −10 dBV maximum 
  • 0dB: +10 dBV maximum 
  • –10dB: +20 dBV maximum
Gain Adjustment Range:
  • 30dB
Input Impedance:
  • 1 Mohm
RF Output Power:
  • 10–30 mW (varies by region)
Pin Assignments:
  • TA4M: 
  • 1: ground (cable shield) 
  • 2: +5V Bias 
  • 3: audio 
  • 4: Tied through active load to ground (on instrument adapter cable, pin 4 floats)
Dimensions (HxWxD): 
  • 108 mm x 64 mm x 19 mm
Weight:
  • 81 g (3 oz.), without batteries
Housing: 
  • Galvanized steel
Power Requirements:
  • 2 "AA" size alkaline or rechargeable batteries
Battery Life:
  • Up to 8 hours (alkaline)
SLX4 Dimensions (HxWxD):
  • 42 mm x 197 mm x 134 mm
Weight: 
  • 1 lb. 13 oz.
Housing:
  • Galvanized steel
Sensitivity:
  • –105dBm for 12dB SINAD, typical
Power Requirements:
  • 12–18V DC @ 150 mA, supplied by external power supply (tip positive)
Configuration:
  • Impedance balanced
Maximum Audio Output Level:
  • Ref. ±38kHz deviation with 1kHz tone 
XLR connector:
  • –13dBV (into 600 ohm load), 6.35 mm (1/4") 
Connector:
  • –2dBV (into 3 kohm load)
Impedance:
  • XLR connector: 200 ohm, 6.35 mm (1/4") 
Connector: 1 kohm Pin Assignments
  • XLR connector: 1=ground, 2=audio, 3=no audio 
6.35 mm (1/4") connector: 
  • Tip=audio, Ring=no audio, Sleeve=ground
Image Rejection 
  • >70dB, typical
Volume Adjustment Range
  • 0dB to –25dB

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.