Quilter Labs OverDrive 202 Guitar Head Black


Description
The INPUT has a high impedance for maximum pickup response. The OverDrive Channel GAIN adjusts a wide range of signals from clean to overdrive. Turning up the LIMITER progressively cushions overdrive distortion while maintaining low-level sustain and is effective on both channels. The OUTPUT sets a level that is also controlled by the MASTER VOLUME. On the Clean Channel, a traditional 3-BAND EQ provides full control of the instrument’s tonal balance and affects both the Clean and OverDrive channel. A VOICE switch selects 3 distinct personalities that can be further adjusted with the wide-range EQ controls. VOICE 1 is a flat response with added treble sparkle. VOICE 2 provides a unique bell-like tone, and VOICE 3 channels the classic “blackface” mid-scoop. Each of these voices lends a distinct sound to their respective Overdrive voices.
The VERB is post FX LOOP and expands your sound stage with a nicely voiced wash of smooth decay. The MASTER control adjusts the breakup threshold of the clean channel from 0 to 200 watts, offering clean headroom and/or rich layered overdrive at will. The SIG OUT is a dual purpose TRS Balanced Line Out or headphone jack, depending on the PRE/POST switch setting. On the rear you will find the UNIVERSAL AC INLET, twin SPEAKER outputs (4-8 ohms), and a traditional RJ-45 connector, allowing a Quilter footswitch to control overdrive channel switching, limiter, and reverb.
Quilter Labs uses modern high-efficiency power technology to maximize warmth and dynamics without the weight and drawbacks of classic tube technology. Advised by musicians, their constant goal is to make products that they are proud to use. The result is a serious professional tool with performance that meets your needs.



Specs
- Input: 1⁄4” Mono, 2 meg impedance, 1.5-5Vpk (depending on EQ)
- FX Loop: 1⁄4” mono, 1V full scale, 1K out, 47K inp (with FX Send lifted)
- Sig Out (Pre): 1⁄4” TRS, balanced line, 40 ohms each leg, 2V full scale
- Headphone (Post): 1⁄4” TRS, 40 ohms each channel, 0-6Vpk (depending on Master)
- Footswitch: RJ-45 (Cat 5,6,7,etc...); Low voltage control
- Speaker Out: 0-200W (depending on Master setting), 8 ohms lower jack, 4 ohms upper jack, 8+8 ohms both jacks
- AC Power: 100-240Vac, 50-60Hz, 300W maximum
- Height: 2.5” + 0.4” rubber feet
- Width: 8.6”
- Depth: 7.3”
- Weight: 4 lbs
Featured Articles
Reviews
5
1 Reviews
100%
of respondents would recommend this to a friend
- Experienced1
- Easy To Use1
- Excellent Sound1
- Good Power Output1
- Portable1
- Warm / Comfy1
Reviewed by 1 customers
Excellent amp
submitted4 years ago
byBrad
fromPittsburgh, PA
This is the first solid state amp I have ever owned. I initially bought this to take along to gigs as a back up to my tube amps. IMO however, this amp sounds as good as any tube amp I have ever owned or played through. I am primarily a blues, and blues rock player and the amount of overdrive on both channels is perfect for me without the need for pedals. Also has beautiful cleans. The controls are intuitive and easy to use and very linear. I can turn it down low enough to play at home. I can also turn it up to be as loud as the amp I use for large outdoor venues. The amp is very touch sensitive. There is nothing lacking what-so-ever as far as this amp is concerned.
- Previous
- 1
- Next
Q&A
Have a question about this product? Our expert Gear Advisers have the answers.
No results but…
You can be the first to ask a new question.
It may be Answered within 48 hours.