QSC

collapse expand iconDescription

The E115 is a trapezoidal, two-way loudspeaker using a 15", 500W, die-cast aluminum frame woofer with a 3.5" voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.

E Series loudspeakers perform well with any god-quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP.

QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
QSC E115-BK 15" 2-Way Passive Loudspeaker
QSC E115-BK 15" 2-Way Passive Loudspeaker
QSC E115-BK 15" 2-Way Passive Loudspeaker

collapse expand iconFeatures

  • High output, professional quality sound with E115 – 500 W continuous power
  • E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  • E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
  • - For PLD/CXD visit Amplifier Navigator Software
  • - For GXD visit the GXD Firmware Updater
  • Titanium diaphragm for high fidelity and long life
  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket

collapse expand iconSpecs

Speaker Configuration
  • Active/passive: Passive
  • Type: Full range
  • LF driver: 15"
  • MF driver: Not applicable
  • HF driver: 2.8" VC, 1.5" exit
Power Capacity
  • 8 Ohms program/peak: Not applicable
  • 4 Ohms program/peak: 500W/2000W
  • Included power amp: No
Audio
  • Frequency response: 43 Hz - 20kHz
  • Coverage pattern: N/A
  • Max SPL: 130 dB
Inputs
  • SPEAKON: 1
Outputs
  • SPEAKON: 1
Enclosure
  • Cabinet material: Plywood
  • Width: 16.5"
  • Height: 28.2"
  • Depth: 17.5"
  • Weight: 75 lb.

Featured Articles