On-Stage Keyboard X Stand Add On Tier

Comments about On-Stage Keyboard X Stand Add On Tier:

This stand was a cinch to assemble. I was nervous at first, but no problems. It's as easy to set-up as it looks. The stabilizer bar is a good touch for making sure the stand is not leaning on either side too far left/right or front/back of the stand. Buy this attachment before you buy a more expensive double tier stand that may not be worth the money down the road.

Comments about On-Stage Keyboard X Stand Add On Tier:

The tier is good, solid construction and is easy to assembel. I have the cheapest On-Stage single frame stand and while it is good the tier added to it made it even more sturdy. WARNING: Just be sure to get this model only if you have an On-Stage product to attach it to. Not all tiers work with other brands.

Comments about On-Stage Keyboard X Stand Add On Tier:

This is a very useful and inexpensive piece of equipment.I have a very small room for my keyboards and was looking for a way to make a little more space and this add on tier fit what i was looking for very well. Another great feature is that as well as giving you a sturdy place to put another keyboard it also gives your stand some extra sturdyness and less "woble". A very nice addition to anyones studio space. .....Rock on.

Comments about On-Stage Keyboard X Stand Add On Tier:

I bought this stand for my wife. She has a Rhodes and a Yamaha. Both are 88 key keyboards. She plays in a christian paise band and has used it for the past month. It is sturdy and durable. So for no complaints. It has been a great addition to the praise band!

Comments about On-Stage Keyboard X Stand Add On Tier:

I like this stand a lot. Sturdy enough for my purposes, an Alesis Q49 and a good price. I have it attached to a ProLine X stand, which some people said might be a problem. No problem at all. The 2nd tier slipped right in and after a few turns of the knob tightened right up. I could use it without the cross-bracing, but it definitely makes it more sturdy.

Comments about On-Stage Keyboard X Stand Add On Tier:

If you already have an "X" stand and need an add-on second tier this is a nice, easy, low-cost choice. Sturdy and fairly easy to install. One thing that this add-on model lacks is any kind of adjust-ability. Once you install it, it's pretty much fixed in height and the angle of the keyboard (both things that would be nice to have), but for the cost it's probably too much to expect.

Comments about On-Stage Keyboard X Stand Add On Tier:

Great Stand! Very well made. Can be difficult to loosen joints, but I guess that;s what makes it sturdy.

Comments about On-Stage Keyboard X Stand Add On Tier:

This thing is great ! Saved me from having to but a new stand. It fit my On Stage Stand perfectly and was as easy as could be!

Comments about On-Stage Keyboard X Stand Add On Tier:

If you are looking for an affordable way to add a second tier for another keyboard, you will not go wrong with this product. Easy to assemble and dis-assemble. Make sure you use a double brace X-stand with this add on. Especially if the 2nd board weighs more than 20 pounds. Otherwise the entire rig will sway.

Comments about On-Stage Keyboard X Stand Add On Tier:

Easy to assemble and made very sturdy, almost stronger than my stand, but it will make my stand more stable.

Comments about On-Stage Keyboard X Stand Add On Tier:

I have a QUIK LOC Z stand with tilt tubular second tier. I was amazed that this add on would even fit inside of the support tubes of this second tier but it did!!! Allows three keyboards now and looks right on!

Comments about On-Stage Keyboard X Stand Add On Tier:

Great for my needs. I did have to remove the lower rubber protectors so the keyboard would sit low enough not to slip over top of retaining clips at bottom of rack. The tier is solidly built and perfect for my application.

Comments about On-Stage Keyboard X Stand Add On Tier:

The KSA7500 Universal Second Tier works well as advertised. It is sturdy, so there is no worry about structural failure. The reason for giving it four stars instead of five is because one of the mounting attachments that requires knob-screw tightening does not secure well. The connection to the keyboard stand tube end is a little loose. Also, one of the cords of the end caps was too short, so it wouldn't even fit around the keyboard stand tube. The end caps also pop off too easily -- I've already lost one after the first gig. Would I still recommend it? Absolutely.

Comments about On-Stage Keyboard X Stand Add On Tier:

Item looks great and functions as advertised. Would recommend.

Comments about On-Stage Keyboard X Stand Add On Tier:

Exactly what I wanted for my keys, easily installed, looks great.

Comments about On-Stage Keyboard X Stand Add On Tier:

Easy to setup. With my piano at a comfortable height, this stand just barely spread the length of my Novation LaunchKey 49. Any size keyboard larger than that will work great, and if yours is smaller, you should be warned you may have to adjust the height of the keyboard/piano on the first tier.

Comments about On-Stage Keyboard X Stand Add On Tier:

not for a heavy keyboard

Comments about On-Stage Keyboard X Stand Add On Tier:

I have been using a Roland Juno-G keyboard. In addition, I recently purchased a second keyboard for recording purposes. The X Stand add-on tier looked like it was exactly what I needed to accommodate the second board, rather than purchasing an additional stand. I have a limited amount of space within which to set up equipment in my home and the add-on seemed to be the ticket. It worked out just fine for me and I could not be any more pleased with it.

Comments about On-Stage Keyboard X Stand Add On Tier:

A good add on Tier. Have no problem attaching to the standard X-keyboard stand. Very easy to attach and remove.