The Control 29AV-1 provides improved voicing for extremely flat, high fidelity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker. The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the... Click To Read More About This Product
The Control 29AV-1 provides improved voicing for extremely flat, high fidelity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker. The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use of the speaker as close as 9" (230 mm) to video monitors. The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the 8-ohm impedance allows use of multiple speakers on a loudspeaker line.
The InvisiBall mounting method is simple to install, aims easily and provides a high degree of theft deterrence. InvisiBall allows horizontal rotation of up to 41 off-axis and vertical rotation of up to 36 (horn end inward) or 23 (woofer end inward).
Weather resistance has been maximized in the Control 29AV-1 speaker. The woofer's cone is made of kevlar, surround is pure butyl rubber, and the driver basket is rear loaded to minimize direct exposure. The compression driver's diaphragm is pure titanium. The grille is thermoset composite-coated and comes with foam to minimize incursion of water. Nickel/zinc rust-resistant terminals ensure a secure input connection. An MTC-PC2 sealed-entrance cover is included to further protect the speaker's terminals.
JBL's exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.
You can't go wrong with speakers from the company whose name is synonymous with cinema sound and was voted number one in the recording industry in 1976 (the heyday of recording) by studio professionals. Today, JBL monitors are used by Grammy winners such as Frank Fillipetti (Ray Charles, Korn, Billy Joel, Kiss) and Nate Kunkel (B.B. King, Sting, Crystal Method, Maroon 5).
Extremely smooth, flat frequency response with extended bandwidth
110 x 85 HF coverage, rotatable horn
110-Watt transformer for 70V or 100V lines, with 8 ohms through
SonicGuard overload protection
8" (200mm) Kevlar cone woofer, 1" (25mm) titanium diaphragm compression driver
InvisiBall mounting hardware
Ten 6mm attachment points for suspension and optional U-bracket
Sealed input panel cover and screw-down input terminals
Frequency Range (-10 dB): 37 Hz ” 18 kHz
Frequency Response (±3 dB): 43 Hz ” 15 kHz
100-Hour Power Capacity: 300 Watts Continuous Program Power, 150 Watts Continuous Pink Noise
Maximum SPL @ 1m3: Short-Term: 118 dB; Long-Term: 112 dB
Nominal Sensitivity (half-space average 100 Hz to 10 kHz): 90 dB, 1W @ 1 m (3.3 ft)
Nominal Coverage Angle: 110H x 85V, rotatable
Directivity Factor (Q): 6.7, averaged 500 Hz to 16 kHz
Directivity Index (DI): 8.3 dB, averaged 500 Hz to 16 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
Crossover Type: 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Transformer Taps: 70V: 110W, 55W, 28W & 14W; 100V: 110W, 55W, & 28W; through position: 8 ohms nominal
Low Frequency: 8" (200mm) kevlar cone with pure butyl rubber surround, 2" (50mm) voicecoil on fiberglass former
High Frequency: 1" (25mm) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure Material: High impact polystyrene
Grille: Thermoset composite-coated steel
Overload Protection: Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during extreme overload conditions
Environmental: IEC 529 IP-X4 splashproof rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Termination: Screw-down terminal strip, zinc-plated copper base, nickel-plated metal screws/washers. Accepts up to 9mm outside 4mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm)
Safety Agency Rating: Transformer is listed per UL1876
Dimensions: 20.5"H x 12"W x 10.9"D (520x306x277mm)
Net Weight (each): 26.8 lbs. (12.2 kg)
Shipping Weight (each): 30.8 lbs. (14.0 kg)
Included Accessories: 1-piece MTC-PC2 input panel cover, InvisiBall mounting base, 6x260mm hex wrench
Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.