Gallery
Description
Features
Specs
Reviews
Q&A
Gator

collapse expand iconDescription

The Gator Flight Pro V2 TSA Series ATA Molded Electric Guitar Case is built for the working musician. Molded from rugged polyethylene, this case protects standard electric guitars during transport and is TSA-approved for hassle-free air travel. The plush interior cradles your instrument in comfort, while an aluminum valance and thick EVA foam padding provide superior impact resistance. Recessed steel-reinforced rivets and industrial-strength hardware keep the case securely closed, guarding your guitar from damage.

TSA-Compliant Latches for Easy Air Travel

The Gator Flight Pro V2's TSA-approved latches allow you to keep your guitar safely packed away right up until you reach the boarding gate. Simply unlock the latches for security screening, then re-lock them once cleared to ensure your instrument stays protected during loading and transit. These heavy-duty yet easy-to-use latches are a must for any traveling musician.

Rugged Exterior Built to Withstand Life on the Road

Molded from high-density polyethylene, this guitar case features recessed steel rivets, aluminum trim, and impact-resistant EVA padding. Its rugged build quality is designed to shield your instrument from the dings, drops, and impacts that come with touring. The textured surface also provides an easy grip when loading and unloading. An industrial rubber seal around the rim of the case helps keep out dust, moisture and other environmental hazards your guitar may encounter.

Plush Interior Pampers Your Axe

The roomy interior of the Gator Flight Pro V2 cradles your guitar in high-pile plush lining and dense foam padding. Customizable neck support blocks let you perfectly fit your instrument. A large accessory pouch provides storage for tools, strings, straps and more, keeping everything in one place. Your guitar will fly first class in the comfort of this premium case.

Lifetime Warranty for Years of Use

The Gator Flight Pro V2 guitar case comes with a lifetime warranty against manufacturing defects. Built to handle the demands of frequent travel and use, this high-quality case provides years of protection for your instrument. When only the best will do, the Gator Flight Pro V2 delivers.

Gator Flight Pro V2 TSA Series ATA Molded Electric Guitar Case Black
Gator Flight Pro V2 TSA Series ATA Molded Electric Guitar Case Black
Gator Flight Pro V2 TSA Series ATA Molded Electric Guitar Case Black

collapse expand iconFeatures

  • Designed to fit standard electric guitars, including Strats and Teles
  • ATA molded military-grade polyethylene outer shell
  • TSA-approved locking center latch, ideal for air travel
  • Universal-fit EPS protective foam interior nest
  • Thick brown plush interior
  • Extended reach protective neck cradle
  • Ergo-grip, injection-molded handle
  • Surface-mounted impact diversion latch housing and red release trigger
  • Black powder-coated hardware and continuous valance

collapse expand iconSpecs

Interior Dimensions
  • Interior Height: 2.8"
  • Body Length: 18.5"
  • Body Height: 2.8"
  • Lower Bout Width: 12.8"
  • Middle Bout Width: 12.8"
  • Upper Bout Width: 12.8"
  • Overall Length: 39.2"
Exterior Dimensions
  • Exterior Length: 40.9"
  • Exterior Width: 16.4"
  • Exterior Height: 5.4"
  • Exterior Weight: 11.6 lb.
Shipping Dimensions
  • Shipping Length: 41"
  • Shipping Width: 17"
  • Shipping Height: 6"
  • Shipping Weight: 14 lb.

Featured Articles

collapse expand iconReviews

4.64

36 Reviews

91%

of respondents would recommend this to a friend

I were gladly buy another one of these in the future
Great fit for my Schecter CR6
Great fit for my Schecter CR6
Don't want to carry your Strandberg in a bag anymore?
My only regret is not buying another :-)
My only regret is not buying another :-)
My only regret is not buying another :-)
Nice but Padding Could Be Softer
Best guitar case available at any price
Best guitar case available at any price

Most Liked Positive Review

5

Great fit for my Schecter CR6

This case is a perfect fit for my Schecter CR6! It doesn't slide inside the case from end to end or from side to side, in fact, it doesn't move at all. All of the latches work great. I have seen "rampies" throwing baggage to the ground from aircraft, and I hope that never happens to this case because it's not made for that. The case is plastic with styrofoam inside, so it would be stronger if it had thicker more durable (ABS) plastic on the sides or even wood like an old Gibson or Fender case. I like the large dual storage areas for accessories. I would have liked one of them to extend further into the headstock area to make it long enough to fit my flyrig in. Overall, it's a great design.

VS

Most Liked Negative Review

2

Great shell/latches with a few issues

⚠️ DO NOT ORDER FOR SCHECTERS ⚠️ I ordered this online for a Schecter C1 Platinum, but it arrived and my guitar didn't fit. The angle of Schecter headstocks is apparently too much for the not deep enough case. So when I layed my guitar inside the tip of the headstock hits the case bottom before the neck hits the cradle. This is compounded by the angles of your tuning pegs, especially the b/e, being on the tip. If they're oriented up/down they can hit or bottom out just before the headstock. The guitar should NOT rest on EITHER of these.. there should be no contact with the case and headstock/pegs, obviously. With the headstock holding up the guitar this way the neck barely touches down in the neck cradle at the nut end, whilst running even higher toward the body until there's at least a 1.5" gap at the body end of the neck cradle. Meaning ABSOLUTELY NO SUPPORT. Also the body compartment is flat with no angle of taper to match the body contours so there's also a considerable gap under most of the body Meaning basically when my guitar was in the case it was being supported on MAYBE a 1/2" wide strip of the neck nearest the nut and making no more contact again with the case until the last inch of the guitar near the bottom strap button. One would think the case was sagging or my guitar is straight as a recurve bow. Once I closed the case the right side of the valance wouldn't make contact cause the lid was hitting my bridge. The case would have to be forced shut the last 1/2" and put pressure on my guitar parts it is meant to protect While mostly a simple design flaw in dimensions perhaps. I do consider all the varying sizes and shapes of guitars and credit that difficulty to match every guitar with ONE case. HOWEVER, the interior liner feels as if it was glued to a styrofoam cooler and that is completely unacceptable. It's VERY RIGID. Perhaps if GATOR had used a softer foam maybe it would allow the guitar to "settle in" a bit and the fit would be fine(cont.)

Filters
Best Uses
  1. Concerts8
  2. Back-Up6
  3. Practicing4
  4. Protects my Chinese Start copt1
  5. Probably Stratocasters only.1
Cons
  1. None1
  2. Poor Quality1
  3. Smaller than expected.1
  4. Interior padding1
  5. I do not like plastic latches and over priced1
Describe Yourself
  1. Experienced21
  2. Novice7
  3. Professional Musician5
Pros
  1. Good Quality26
  2. Functional20
  3. Easy To Use18
  4. Exterior shell/Latches1
  5. Upgraded Keys1

Reviewed by 36 customers

  • Yes

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    byChris

    fromLisman al

    Submitted as part of a sweepstakes

    Great quality

  • Great Case!

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    byCraig

    fromNew York

    Submitted as part of a sweepstakes

    The same case that I got with y American Ultra Tele without the Fender logos

  • 1221 Grant St

    4

    Verified BuyerVerified Buyer

    submitteda year ago

    byMike

    fromChicago

    Submitted as part of a sweepstakes

    This case fits my PRS SE 24 Custom perfectly. And, it's really high quality. The only issue is the smell on the inside. I know a lot of cases have this issue, but still... At this point I'm convincing myself that it smells like a nitro finish on a classic guitar. :)

  • Yes

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    byAngie

    fromIndianapolis

    Submitted as part of a sweepstakes

    Made very well ,fourth one I've bought as a gift

  • A Step Above a Basic Wood Case

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    byBrandon

    fromSandy, UT

    Submitted as part of a sweepstakes

    Fits my Les Paul, Stratocaster, and Mustang well enough that it could be used for any of those models. Feels sturdy and has excellent latches. I wish the interior was something other than brown, but that's a minor issue and in reality looks fine with all of my instruments.

  • I have four of them no problems so far

    4

    Verified BuyerVerified Buyer

    submitteda year ago

    byAnthony

    fromNew York

    Submitted as part of a sweepstakes

    Tough product snug fit works well

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted20 days ago

    asked byGB

    fromEugene, OR

    Does this case fit Gibson Les Paul Standards and PRS S2 Custom 24 guitars?

    Does this case fit Gibson Les Paul Standards and PRS S2 Custom 24 guitars?

    Open Reply - Gear-Support
    Fit for Gibson Les Paul Standard: Yes The case is typically designed with a Les Paul-style body in mind, so it does fit a Gibson Les Paul Standard securely. Gator even lists Les Paul-style guitars as compatible in their specs for this case. Fit for PRS S2 Custom 24: Not Ideal The PRS S2 Custom 24 has: A slightly longer scale length (25" vs. 24.75" for the Les Paul). A thinner body contour, and A double-cutaway shape, which means it may not rest securely in a case molded for single-cut guitars. While it might physically fit (as in, you can close the case), it may not be well-supported, which can lead to neck or headstock stress during transport—especially for air travel or rough handling.

  • submitteda month ago

    asked byMiko

    fromNorman, OK

    Will it fit a Jackson Corey B. Signature King V?

    Will it fit a Jackson Corey B. Signature King V?

    Open Reply - Gear-Support
    No, it won't.

  • submitted5 months ago

    asked byIceDude

    fromNorthport, Fl

    Will an Ibanez IC520 / Iceman fit?

    Will an Ibanez IC520 / Iceman fit?

    Open Reply - Gear-Support
    Unfortunately, no.

  • submitted7 months ago

    asked byMarie

    fromUtah

    Will this fit a ESP LTD H3-1000FR guitar?

    Will this fit a ESP LTD H3-1000FR guitar?

    Open Reply - Gear-Support
    Yes, it will.

  • submitted7 months ago

    asked byHoek32

    fromLake Forest, ca.

    Will a Dean Cadillac fit in this case?

    Will a Dean Cadillac fit in this case?

    Open Reply - Gear-Support
    Yes, it will.

  • submitted9 months ago

    asked byThomas

    fromMcminnville tn

    Will this fit a bc rich v jr?

    Will this fit a bc rich v jr?

    Open Reply - Gear-Support
    No, it won't.

  • submitted10 months ago

    asked byDanny406

    fromBozeman MT.

    will it fit a Randy rhodes 7 string with reverse headstock?

    will it fit a Randy rhodes 7 string with reverse headstock?

    Open Reply - Gear-Support
    Yes, it will.

  • submitteda year ago

    asked byHarry

    fromNC

    Will this fit a esp eclipse

    Will this fit a esp eclipse

    Open Reply - Gear-Support
    Yes it will

  • submitteda year ago

    asked byKevin

    fromMillbury, MA

    Will this case fit a 2018 Fender XII 12 string Strat?

    Will this case fit a 2018 Fender XII 12 string Strat?

    Open Reply - Gear-Support
    Yes it will

  • submitteda year ago

    asked byGeorge

    fromSan Diego, CA

    will my Duesenberg Paloma fit into this case?

    will my Duesenberg Paloma fit into this case?

    Open Reply - Gear-Support
    Yes it will.