EngineerAcousticsLevels
Open Box Yamaha PX3 Power Amplifier Level 2 197881248291
Condition:Open Box - Blemished
$527.99
6-month special financing^ + $26 back in Rewards** Limited time Learn More
Lease-To-Own Purchase OptionsLearn more
Protect your gearLearn more
Cover drops, spills or cracks with Pro Coverage

Need Help?

Description
This advanced power amplifier combines intelligent processing with high output to meet the requirements of a vast range of sound reinforcement environments. Boasting 300W x 2 at 8 ohms and 500W x 2 at 4 ohms, the PX3 has plenty of punch to satisfy your power needs, along with advanced features that will make your life easier at your next event. Most notably, this little powerhouse delivers onboard equalization and settings for delays and crossovers—a huge bonus if you care about producing the best sound possible, but don't care much for lugging extra gear.
The Yamaha PX3 2-channel amplifier is driven by a newly developed Class-D amplifier engine that concentrates all the necessary functions into a single custom LSI chip, and uses PLL technology to control transfer characteristics in real time, achieving impressive sound quality and power. This new single-chip architecture offers higher output and improved performance in a more lightweight, yet reliable design. A combination of cutting-edge technology and an exhaustive component selection process make PX Series amplifiers supremely efficient amplifiers with low noise, reliable protection features, and above all, outstanding sound quality.
DSP for audio processing
Amp Mode allows the user to configure the system without difficulty by selecting the input routing and output routing. A total of 15 types of patterns can be selected. - Input routing (Dual/Parallel/Single/SUM)- Speaker System Structure (FULL+FULL/SUB+SUB/FULL+SUB/Bi-Amp/Boost Full/Boost Sub)
Sophisticated Signal Processing
The PX3 comes with flexible onboard crossover, filters, delay, limiter and PEQ (fixed preset) functions as standard, allowing quick and easy system setup via the LCD display, without the need for any additional outboard gear. It also features Yamaha’s intelligent D-CONTOUR multi-band dynamic processing, allowing users to achieve consistent clarity and high-quality sound for either front-of-house or monitor configurations.
Easy, Intuitive Setup
To accommodate users with varying levels of sound reinforcement experience, the PX3 offers both Basic and Advanced setup modes. Basic mode allows even inexperienced users to easily configure a system that meets their needs, while Advanced mode offers experienced users more precise control over every aspect of their sound. The PX3 also features eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers.
Flexible Connectivity, Durable Construction
Equipped with both XLR and TRS inputs, and binding post, SpeakON and phone outputs, the Yamaha PX3 offers the flexibility needed for a variety of setups and environments, and the durability to stand up to extended road-use thanks to the sturdy chassis and carrying handle design.
Power Boost Mode
The PX3 also comes equipped with a Power Boost Mode that combines the power output from two channels into one, achieving significantly higher single-channel power levels to drive high power handling speakers when needed.
Smart Config Wizard
The Config Wizard allows users to save even more time during system setup by assigning optimized speaker settings that match your system configuration– simply select the appropriate filter and crossover for each speaker, and Config Wizard will do the rest. Config Wizard also features presets specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including the popular CBR, Club, Installation, and VXS/VXC series, and an advanced mode that allows more detailed configuration of parameters such as input routing, input sensitivity, amp gain, and speaker impedance.
Utilities for Safe and Secure Operation
The PX3 dual-channel amplifier makes it fast and easy to configure panel settings, monitor amplifier status, and transfer data via USB, and also feature a panel locking function to keep your settings safe. Users can even export information such as internal device and log data to USB for rapid troubleshooting should difficulties arise.
The Yamaha PX3 2-channel amplifier is driven by a newly developed Class-D amplifier engine that concentrates all the necessary functions into a single custom LSI chip, and uses PLL technology to control transfer characteristics in real time, achieving impressive sound quality and power. This new single-chip architecture offers higher output and improved performance in a more lightweight, yet reliable design. A combination of cutting-edge technology and an exhaustive component selection process make PX Series amplifiers supremely efficient amplifiers with low noise, reliable protection features, and above all, outstanding sound quality.
DSP for audio processing
Amp Mode allows the user to configure the system without difficulty by selecting the input routing and output routing. A total of 15 types of patterns can be selected. - Input routing (Dual/Parallel/Single/SUM)- Speaker System Structure (FULL+FULL/SUB+SUB/FULL+SUB/Bi-Amp/Boost Full/Boost Sub)
Sophisticated Signal Processing
The PX3 comes with flexible onboard crossover, filters, delay, limiter and PEQ (fixed preset) functions as standard, allowing quick and easy system setup via the LCD display, without the need for any additional outboard gear. It also features Yamaha’s intelligent D-CONTOUR multi-band dynamic processing, allowing users to achieve consistent clarity and high-quality sound for either front-of-house or monitor configurations.
Easy, Intuitive Setup
To accommodate users with varying levels of sound reinforcement experience, the PX3 offers both Basic and Advanced setup modes. Basic mode allows even inexperienced users to easily configure a system that meets their needs, while Advanced mode offers experienced users more precise control over every aspect of their sound. The PX3 also features eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers.
Flexible Connectivity, Durable Construction
Equipped with both XLR and TRS inputs, and binding post, SpeakON and phone outputs, the Yamaha PX3 offers the flexibility needed for a variety of setups and environments, and the durability to stand up to extended road-use thanks to the sturdy chassis and carrying handle design.
Power Boost Mode
The PX3 also comes equipped with a Power Boost Mode that combines the power output from two channels into one, achieving significantly higher single-channel power levels to drive high power handling speakers when needed.
Smart Config Wizard
The Config Wizard allows users to save even more time during system setup by assigning optimized speaker settings that match your system configuration– simply select the appropriate filter and crossover for each speaker, and Config Wizard will do the rest. Config Wizard also features presets specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including the popular CBR, Club, Installation, and VXS/VXC series, and an advanced mode that allows more detailed configuration of parameters such as input routing, input sensitivity, amp gain, and speaker impedance.
Utilities for Safe and Secure Operation
The PX3 dual-channel amplifier makes it fast and easy to configure panel settings, monitor amplifier status, and transfer data via USB, and also feature a panel locking function to keep your settings safe. Users can even export information such as internal device and log data to USB for rapid troubleshooting should difficulties arise.



Features
- Dual-channel power amplifier
- Redesigned Class-D engine with a custom LSI
- 300W x 2 at 8 ohms; 500W x 2 at 4 ohms
- Onboard PEQ and settings for delay and crossover
- Utilities for safe and secure operation
Featured Articles
Reviews
5
1 Reviews
100%
of respondents would recommend this to a friend
Filters
Best Uses
- Home Studio1
- Outdoor Events / Games1
- Pro Audio / DJ / Mixing1
Describe Yourself
- Experienced1
Pros
- Easy To Use1
- Excellent Sound1
- Good Power Output1
- Portable1
- Warm / Comfy1
Reviewed by 1 customers
Love this amp excellent sound quality & powerful for 300 wa
submitted6 years ago
byRichie
fromNew Jersey
Dj gigs or
- Previous
- 1
- Next
Q&A
Have a question about this product? Our expert Gear Advisers have the answers.
submitted6 years ago
asked byLarry
fromGlendale CA
How many rack spaces does this take up?
This amp takes up 2 rack spaces.submitted7 years ago
asked byRico
fromLA
Can I use this amplifier for my Yamaha N S 10 monitors
That would work. The thing you would want to look out for us underpowering the speakers and burning them out.That would work. The thing you would want to look out for us underpowering the speakers and burning them out.