collapse expand iconDescription

The BASSBOS SV9 is a studio-reference quality monitor you can also take with you outside the studio. With a rugged finish, handle, grille and a substantial amount of power, this compact and portable system is perfect for those who need premium quality and impressive output, places and situations where you need to cover distanced crowds without large-sized, heavy and obtrusive cabinets.

The compact, high-fidelity and high-output SV9 takes over where the popular BASSBOSS SV8 single 8” powered monitor left off, continuing the BASSBOSS tradition of delivering remarkable bass performance and outstanding sound quality. The SV9's single 9” loudspeaker is comparable to much larger loudspeakers in response and output thanks to innovative design and components. Its birch plywood enclosure is strong enough to withstand the rigors of the road, but light enough to take with you and without needing a burly roadie.

The SV9's 9” woofer features a large voice coil and a rubber surround for high power handling and smooth response. Its amplifier offers abundant headroom and with the proprietary BASSBOSS processing you can be confident you'll get exceptional sound quality and reliability. The combination of cabinet construction, design and premium components make for a rich, smooth, sound for any occasion.
  
The SV9 is suitable for use as a studio monitor, however if you have a small event, you'll be just as satisfied with its performance. With an extremely flat frequency response with a neutral character for critical monitoring duties, and its 1,200W of power delivers remarkably high output. With an enclosure that is just 18" x 10" x 15" and a mere 26 pounds, smaller events can be covered with ease.
BASSBOSS SV9 Powered Monitor 9 in.
BASSBOSS SV9 Powered Monitor 9 in.
BASSBOSS SV9 Powered Monitor 9 in.

collapse expand iconFeatures

  • Baltic birch cabinet features durable high-pressure polyurea coating, integrated handles and a steel pole socket
  • 1,200W Class-D SMPS amp with PFC, offering 2-channels: 800W LF and 400W HF
  • Four presets allow for a variety of configurations
  • Custom-developed 9” neodymium LF driver for large displacement and higher sensitivity
  • 2.5" voice coil offers great power handling and high output
  • Single-roll rubber surround provides a very smooth frequency response
  • Annular diaphragm ring-radiator HF driver
  • Lighter diaphragm results in lower distortion and extended HF response
  • Smaller neodymium motor of the HF driver offsets the added weight of the larger LF motor, keeping it lightweight
  • Optimized cabinet design
  • Premium-quality drivers
  • Power-matched amplification
  • Comprehensive processing

collapse expand iconSpecs

Acoustical
  • Loudspeaker Description: Wide dispersion compact full-range self-powered loudspeaker with additional presets for satellite mode operation
  • Frequency Response (±3dB): Preset 1: 50Hz–19kHz (Full Range)
  • Preset 2: 65Hz–19kHz
  • Preset 3: 80Hz–19kHz
  • Preset 4: 100Hz–19kHz
  • Maximum Sustained Output: 118dB SPL, 1 m, 2pi, half-space
  • Max SPL (Peak)*: 121dB
  • Nominal Dispersion: 90°x60° (Rotatable)
Electrical
  • Amplifier: 1,200W—two-channel Powersoft Class-D amplifier
  • DSP: Integrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and limiting
  • Electrical Connectors, Amplifier: Neutrik powerCON
  • Electrical Connector, Mains: NEMA5-15 (Edison) standard 3-pin grounded plug
  • Voltage Operating Range: 90–250V Auto-sensing, auto switching pfc universal supply
  • Current Draw, Nominal: 1.4A @ 1/8 power
  • Signal Input Connector: XLR-F
  • Signal Output Connector: XLR-M pass-through only
Physical
  • Enclosure Type: 2-way full-range/mid-high. Direct radiating vented LF section, horn-loaded HF section
  • Transducer, LF: 1 x 9" diameter (220 mm) neodymium motor woofers with 2.5" (64 mm) copper winding voice coil
  • Transducer, HF: 1.5” (38 mm) diaphragm compression driver on 1" throat 90 x 60 degree horn
  • Cabinet Construction: 15 mm Baltic birch plywood, equipped with two handles and includes a 35 mm steel pole socket
  • Dimensions (HxWxD): 18" x 10" (7" rear) x 15"
  • Net Weight: 26 lb. (11.8 kg)
  • Shipping Weight: 31 lb. (14 kg)
  • Exterior Finish: Black weatherproof bonded high-pressure polyurethane
  • Grille: Perforated, Powder-coated steel
  • (Optional) Suspension Points: 4 x 3/8" 16 tpi, 2 top, front and rear, 2 bottom, front and rear

Featured Articles