Gallery
Description
Features
Specs
Reviews
Q&A
Audio-Technica

collapse expand iconDescription

The Audio-Technica AT-LPW30TKR is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 & 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

The AT-LPW30TKR turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal 1/2"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30TKR is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Audio-Technica AT-LPW30TKR Belt-Drive Teak Turntable
Audio-Technica AT-LPW30TKR Belt-Drive Teak Turntable
Audio-Technica AT-LPW30TKR Belt-Drive Teak Turntable

collapse expand iconFeatures

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminum platter with rubber mat
  • AT-HS4 universal 1/2"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
  • AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat and removable hinged dust cover

collapse expand iconSpecs

  • Type: Belt-drive manual turntable
  • Motor: DC servo
  • Drive: Method Belt drive
  • Speeds: 33-1/3 RPM, 45 RPM
  • Turntable Platter: Die-cast aluminum
  • Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz
  • Signal-to-Noise: Ratio >60dB
  • Output Level: Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
  • Pre-amp: "LINE": 200 mV nominal at 1kHz, 5 cm/sec
  • Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
  • Power Supply Requirements 100-240V AC, 50/60 Hz, 0.5 A Max.
  • Power Consumption 110V, 60Hz
  • Working: 1.1W
  • Motor off: 1.0W
  • Power off: 0.1W
  • Dimensions (WxDxH): 16.53" x 13.38" x 4.6"
  • Weight: 3.90 kg (8.60 lb.) without dust cover
  • Accessories Included: Dust cover, Platter, turntable mat, drive belt, counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45 RPM adapter, RCA audio cable (approx. 3.3’), AC adapter (approx. 4.9’) (AD-SA1205WE), dust cover hinges
  • Tonearm type: Static balanced straight aluminum pipe tonearm
  • Effective arm length: 223.6 mm
  • Overhang: 18.6 mm
  • Tracking error angle: <2 degrees
  • Applicable cartridge weight: 12-17 g
  • Stylus pressure adjustment range: 0-3 g
  • AC adapter: 12 V, 0.5 A
  • Replacement Stylus: AT-VMN95C