Solid State Logic

collapse expand iconDescription

The Solid State Logic XL-Desk is designed for tracking or mixing engineers who require an analogue console within a DAW centric studio, but don't want or need the integrated DAW control and analogue level automation. The XL-Desk is, in many ways, a traditional 24 into 8 analogue console packed with an incredible collection of features. It has 20 channel strips: 16 dual input mono (switchable between main input or DAW return) and 4 stereo channels. The first eight channels have VHD mic pre's. There is an 18 slot 500 format rack built in that can be used for processing or mic pre's. There are four main Mix Busses (A, B, C, D) with buses B, C and D able to be summed into Mix A. The Busses and channels can access the 500 rack and each have a separate insert point for processing. There are two mono aux sends and two stereo return inputs. Direct outputs on every channel, stereo return and mix bus enable convenient stem printing. Each channel has a Cue Stereo Bus section (with Pan and Volume) used to provide one of the headphone mixes while tracking. At mixdown, the mono channel DAW return signals can be routed to the CUE ST bus and then summed into Mix A, so there are 16 main faders, 16 Cue ST inputs and 4 Stereo channels providing 40 summing inputs. There is also a fully-featured monitoring section with bass management, Foldback A and B with individual talkbacks for headphone mixes and a built-in Listen Mic input and classic compressor circuit, with its own direct output.
Solid State Logic XL-Desk SuperAnalogue Mixer with Integrated 500 Series Rack
Solid State Logic XL-Desk SuperAnalogue Mixer with Integrated 500 Series Rack
Solid State Logic XL-Desk SuperAnalogue Mixer with Integrated 500 Series Rack

collapse expand iconFeatures

  • Eight of SSL's patented Variable Harmonic Drive preamps
  • 500 format slots
  • Comprehensive monitoring and communication

collapse expand iconSpecs

  • Power Supply: IEC320 3-pin connector, 100 – 240 Vac, 50 – 60 Hz
  • Analogue I/O: 25-pin D-type socket, balanced, Zin > 10kΩ, Zo ≈ 100Ω/3-pin XLR-M, balanced, Zo ≈ 100Ω
  • Headphones: Stereo 1/4" jack socket, Zo ≈ 75Ω
  • iJack: Stereo 3.5mm jack socket, Zi ≈ 10k
  • USB: 1 x type-B chassis socket (SSL diagnostic use only)
  • Maximum I/O Level: +18dBu or 24dBu
  • Frequency Response:
  • Line/Alt in to Channel Out (post) 20Hz – 40kHz ±0.2dB
  • Line/Alt in to Mix bus (single fader) 20Hz – 40kHz ±0.5dB
  • Noise:
  • Line/Alt in to Channel Out (post) < –86dBu (20Hz – 20kHz)
  • Line/Alt in to Mix bus (single fader) < –83dBu (20Hz – 20kHz)
  • Headroom: > +24dBu (into 10kΩ)

Featured Articles