Gear SpecialistBundlingMusician
Guitars
Guitars
Amps & Effects
Amps & Effects
Used & Vintage
Keyboards & MIDI
Keyboards & MIDI
Drums
Drums
DJ Equipment
DJ Equipment
Basses
Basses
Recording
Recording
Live Sound
Live Sound
Accessories
Accessories
Mics & Wireless
Mics & Wireless
Music Software
Music Software
Lighting
Lighting
- Popular Brands
Band & Orchestra
Band & Orchestra
Platinum Gear
Deals
Deals
New Arrivals
Shure MC51B Microflex Lavalier Microphone
$299.99
Need Help?

Description
The Shure MC51B is a unidirectional subminiature, electret condenser Lavalier microphone. It provides uncompromised sound quality and high reliability with minimal visibility in sound reinforcement applications such as television broadcasting and stage performances. Despite its small size, the microphone's condenser element provides full, clear and natural reproduction of speech.
The MC51B Unidirectional model is supplied with two types of equalization caps for high frequency response shaping. The mild boost equalization cap attenuates the natural high frequency peak of the microphone. The high boost cap does not attenuate the high frequency peak. The MC51B mic is also supplied with two foam windscreens to minimize wind noise. Included mounting accessories consist of a lapel clip, a tie clip, a pin mount, and a magnet mount, giving the user a wide variety of options for placement.
The MC51B Unidirectional model is supplied with two types of equalization caps for high frequency response shaping. The mild boost equalization cap attenuates the natural high frequency peak of the microphone. The high boost cap does not attenuate the high frequency peak. The MC51B mic is also supplied with two foam windscreens to minimize wind noise. Included mounting accessories consist of a lapel clip, a tie clip, a pin mount, and a magnet mount, giving the user a wide variety of options for placement.

Features
- Extended frequency response with user changeable equalization caps for response shaping (omni only)
- Low visibility with a variety of options for mounting
- Low handling noise
- Legendary Shure quality, ruggedness, and reliability
- Includes In-line preamplifier and 5-foot (1.5m) cable with TA4F connector
- All foam windscreens
Specs
- Type: Condenser (electret bias)
- Polar Pattern: Cardioid
- Output Impedance (at 1,000 Hz): 136 ohms actual (rated at 150 Ohms)
- Output Level (at 1,000 Hz): -46 dBV/Pa (1 Pa = 94 dB SPL)
- Maximum SPL: 143 dB at 1% THD/ 1 kilohm load
- Frequency Response: 20 to 20,000 Hz
- Output noise (equivalent SPL, A-weighted): 35 dB typical; 38 dB maximum
- Dynamic Range: 108.0 dB
- Signal-to-Noise Ratio: 59 dB at 94 dB SPL
- Power Requirements: 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1)
- Current Drain: 4.6 mA
- Polarity”Positive pressure on the diaphragm produces a positive voltage at:
- pin 2 relative to pin 3 of the output connector of preamplifier
- Overvoltage Protection: ±75.0 Vdc maximum from pins
- 2 and 3 to pin 1
- Cap and Overmold material: Polypropylene
- Environmental Conditions: Operating Temperatures: ”18 to 57 degrees C (0 to 135 degrees F);Storage Temperatures: ”29 to 74 degrees C (”20 to 165 degrees F); Humidity: 0 to 95%
- Cable and connector: 1.5 m (5 ft) extended length small-diameter, shielded, with miniature female 4-pin connector (TA4F type)
- Dimensions (Length x diameter): 5' (including cable) x 3 .23" (1.52 x 5.8 mm)
- Net Weight: 4.3 oz. (121 g) with cable, connector, and preamplifier
Reviews
Be the first to review the Product
Q&A
Have a question about this product? Our expert Gear Advisers have the answers.
No results but…
You can be the first to ask a new question.
It may be Answered within 48 hours.

.jpeg)

