Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Shure

collapse expand iconDescription

With a low-profile mic stand, 20 feet of XLR mic cable and the Shure BETA 52A Kick Drum Mic, this package was put together to help you pick up your low-end instruments at a lower price.

Shure BETA 52A Kick Drum Mic
The Shure BETA 52A kick drum mic is a high-output, dynamic microphone with a frequency response tailored specifically for kick drums and other bass instruments. It provides superb attack and punch, and delivers studio-quality sound even at extremely high SPLs. Its modified supercardioid pattern ensures high gain-before-feedback and excellent rejection of unwanted sound.

DR Pro DR256 mic stand
The DR Pro DR256 is a basic low-profile tripod microphone stand with telescoping boom. Boom is 19" and extends to 31". It is height adjustable from 9" to 17". The tripod legs extend to 19" per side.

Gear One XLR Microphone Cable
For serious-minded musicians, Gear One's XLR cables have the strength and durability to withstand more than everyday use. Since your cable is your sound, this XLR mic cable's superior wiring allows your signal to be quiet, eliminating frustrating hums, buzzing and crackles.
Shure BETA 52A Kick Mic With Cable and Stand
Shure BETA 52A Kick Mic With Cable and Stand
Shure BETA 52A Kick Mic With Cable and Stand

collapse expand iconFeatures

Shure Beta 52A Kick Drum Mic
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio-quality performance, even at extremely high sound-pressure levels
  • Supercardioid pattern for high gain-before-feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille resists wear and abuse
  • Advanced pneumatic shockmount system minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal-to-noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Gear One XLR Microphone Cable
  • Sturdy construction for enhanced signal and performance
  • Flexible mic cable design eliminates kinks and twists for a tangle-free performance in-studio and onstage
warning

WARNING: This product can expose you to chemicals including Diisononyl phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

collapse expand iconSpecs

Shure BETA 52A Kick Drum Mic
  • Type: Dynamic (moving coil)
  • Frequency response: 20 to 10,000Hz
  • Polar pattern: Supercardioid, rotationally symmetrical about microphone axis
  • Output Level: (at 1,000Hz)
  • Open Circuit Voltage: -64dBV/Pa* (0.6 mV) *1 Pa = 94dB SPL
  • Impedance: Rated impedance is 150 ohm (45 ohm actual) for connection to microphone inputs rated low Z
  • Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Maximum SPL: 174dB at 1,000Hz (calculated)
  • Connector: Three-pin professional audio connector (male XLR type)
  • Case: Silver blue enamel-painted die-cast metal with hardened, matte-finished steel grille
  • Adjustable, Locking Stand Adapter: Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread
  • Net Weight: 605 g (21.6 oz.)

collapse expand iconWarranty

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Featured Articles

collapse expand iconReviews

5

2 Reviews

100%

of respondents would recommend this to a friend

Best deal on a Beta 52A out there!
Filters
Best Uses
  1. Professional Recording1
Cons
  1. None1
Describe Yourself
  1. Experienced1
Pros
  1. Used by Professionals1

Reviewed by 2 customers

  • Great Package Deal!

    5

    submitted4 years ago

    byJasper, B.

    fromTrinity, Texas

    Many "Professional Bassists & Drummers" use the "Shure Beta 52A" in front of their instrument or speaker cabinet with a low profile mic boom stand & microphone cable to record their sound. The Shure Beta 52A is a very tough high quality "Bass Speaker & Kick Drum Microphone". Frequency Response: 20 to 10,000Hz. The DR Pro Low Profile Mic Boom Stand & XLR Gear One microphone cable are both very high quality. Works with both analog or digital mixers & recording equipment.

  • Best deal on a Beta 52A out there!

    5

    Verified BuyerVerified Buyer

    submitted8 years ago

    byAl

    fromundisclosed

    This is the best deal you will find on this mic and it comes with a nice stand as well. The cable is of lower quality but works fine. The mic relays great sound to my amp, cant go wrong with Sure products.

  • Previous
  • 1
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted4 years ago

    asked byVictor

    fromundisclosed

    What would i need to plug this into a samsung.

    What would i need to plug this into a samsung.

    Open Reply - Thomas
    We need a little more information to better answer your question. Please give us a call 877 687 5403