Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Shure

Description

The Shure BETA 181/C instrument mic is a Shure BETA RPM181/Pre preamp fitted with a Shure RPM181/C cardioid capsule. The RPM181/C is ideal for drum overhead, piano, acoustic instrument applications and M/S stereo recording (paired with a Shure BETA 181/BI).

The Shure BETA 181 a multipurpose instrument microphone and can be used on a wide variety of applications including guitars, bass and drums (overheads and snares). It has a small-diaphragm design that provides superior audio with textbook polar responses in a form factor compact enough to get close to the source in the tightest conditions. The BETA 181 has a precision-engineered, side-address design that features an innovative locking ring to provide secure connection between capsule and preamplifier with integrated XLR connections.

There are four different capsules available for the BETA 181 microphone: Cardioid (RPM181/C), Supercardioid (RPM181/S), Bi-directional (RPM181/BI), Omni-directional (RPM181/C). This makes the BETA 181 an extremely versatile and cost-effective mic that allows the user to interchange capsules according to the application (additional capsules sold separately). Comes with mic clip, zippered carrying case and windscreen.

This microphone requires phantom power and performs best with a 48 VDC supply (IEC-61938). However, it will operate with slightly decreased headroom and sensitivity with supplies as low as 11 VDC.
Shure BETA 181/C Instrument Mic

Features

  • Premier live performance microphone with Shure quality, ruggedness and reliability
  • Small-diaphragm design provides superior audio with textbook polar responses
  • The RPM181/C is ideal for drum overhead, piano, acoustic instrument applications, M/S stereo recording (paired with the BETA 181/BI)
  • Side-address form allows for discreet positioning in tight performance and recording settings
  • Frequency response tailored for wide dynamic range for use in high SPL environments
  • Compact preamp attaches to four interchangeable capsules for custom flexibility (capsules sold separately)
  • Innnovative locking ring provides a secure connection between capsule and preamp
  • Hardened steel mesh grille resists denting, wear and abuse
  • Compact design, under 12 cm (5"), reduces stage clutter
  • Furnished with stand adapter and carrying case

Specs

  • Cartridge Type: Electret Condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20 to 20,000Hz
  • Output Impedance: 110 ohm
  • Sensitivity (open circuit voltage, @ 1kHz, typical: -46.5dBV/Pa (2.4 mV)
  • Maximum SPL (1kHz at 1% THD): 2,500 ohm load: 151.5dB SPL, 1,000 ohm load: 149dB SPL
    Signal-to-Noise Ratio: 73.5 dB
  • Dynamic Range: 2,500 ohm load: 131dB, 1,000 ohm load: 128.5dB
    Clipping Level @ 1kHz, 1% THD: 2,500 ohm load: 10.5dBV, 1,000 ohm load: 7.5 dBV
    Self Noise (equivalent SPL, A-weighted, typical): 20.5dB SPL-A
  • Common Mode Rejection (20 to 20,000kHz): ±55dB
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Power Requirements 11-52 V DC phantom power (IEC-61938): 2.4 mA, maximum
  • Weight: 145 g (5.1 oz.)
  • Mic dimensions (Length x Diameter): 4.40" x .80", (124.46 x 20.32 mm)
  • Capsule width: 1.36" (34.54 mm)

Warranty

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Featured Articles

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.