Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Shure

Description

The Axient Digital AD4QNP four-channel receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante and signal-routing options bring a new level of management and flexibility to your entire workflow. This receiver is compatible with all Axient Digital transmitters.
Shure Axient Digital AD4QNP Four-Channel Receiver - (Receiver Only) Band A Band A
Shure Axient Digital AD4QNP Four-Channel Receiver - (Receiver Only) Band A Band A
Shure Axient Digital AD4QNP Four-Channel Receiver - (Receiver Only) Band A Band A

Features

  • Wide tuning range up to 184mHz
  • True digital diversity reception per channel for drop-out resistance
  • Networked control with Wireless Workbench Mobile app
  • Quadversity mode for extended antenna coverage and improved RF signal-to-noise
  • Front-panel headphone jack enables Dante Cue and Dante Browse monitoring
  • Configurable Ethernet switch for redundant Dante digital output
  • Switchable XLR/AES3 outputs
  • Channel Quality meter displays RF signal-to-noise
  • Locking AC connectors
  • Optional DC module available to support redundant power (sold separately)
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Specs

  • Housing: Steel; Extruded aluminum
  • Power Requirements: 100 to 240V AC, 50–60Hz; .68A max.
  • Thermal Dissipation: Maximum: 31W (106 BTU/hr.)
  • Idle: 21W (72 BTU/hr.)
    • Audio Output
    • Gain Adjustment Range: –18 to +42dB in 1dB steps (plus Mute setting)
    • Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced
    • (Tip=audio, Ring=no audio, Sleeve=ground)
    • XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
    • Impedance Typical, XLR Line out: 100ohm
    • Full Scale Output: 1/4" (6.35 mm): +8 dBVXLR
    • 200 kohm load: XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
    • Mic/Line Switch: 30dB pad
    • Phantom Power Protection: Yes
    Networking
    • Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
    • Network Addressing Capability: DHCP or Manual IP address
    • Maximum Ethernet Cable Length: 100 m (328')
    Cascade output
    • Connector Type: BNC
    • Note: For connection of one additional receiver in the same band
    • Configuration: Unbalanced, passive
    • Impedance: 50 ohm
    • Insertion Loss: 0dB, typical
    RF Input
    • Spurious Rejection: >80dB, typical
    • Connector Type: BNC
    • Impedance: 50 ohm
    • Insertion Loss 0dB typical
    • Bias Voltage: 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
    • RF Carrier Frequency: AD4Q=A: 470–636mHz, AD4Q=B: 606–810mHz, AD4Q=C: 750–960mHz
    • Dimensions (HxWxD): 44 mm × 483 mm × 333 mm (1.7" x 19" x 13.1")
    • Weight: 4.8 kg (10.6 lb.), without antennas

    Warranty

    One year warranty on wireless mics, mixers, and circuitry products.
    2 year warranty on wired mics.
    Warranty terms vary. Check with manufacturer for specific product warranty.

    Featured Articles

    Reviews

    Be the first to review the Product

    Q&A

    Have a question about this product? Our expert Gear Advisers have the answers.

    No results but…

    You can be the first to ask a new question.

    It may be Answered within 48 hours.