Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

If your looking for a great case for your precious Schecter diamond Series guitar, look no further. The Schecter Diamond Series Molded Guitar Case is the best for the money. I have one for my Schecter C-1 Hellraiser and I've never head to worry about it getting damaged. I've thrown this case, dropped it, anything you can think of and this thing stands strong. If you're looking for a strong and reliable case for you're precious guitar, trust no other.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

This case is solid and hugs my hellraiser like a mother seeing her kid off to war. I am rest assured that any travel wear will go to the case and not the guitar inside.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

The Schecter Diamond Series Molded Guitar Case has been great to have. I take my guitar to peoples houses and performances all the time and wanted something that would make it so I wouldn't have to worry about my guitar and this truely jumped out at me for the price. It has worked great and still does.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

I have a 2009 Limited GC (guitar center) Anniversary C-1 Hellraiser (only 300 made) with a set of emg 81x and 85x pickups so naturally I'd want to keep it in good condition. This case is a perfect fit (they're custom fitted for the C-1 style)!!!! The guitar fits very snug (1/4 inch of play AT MOST), there isn't a ton of padding but since it's so snug you don't need a lot and what padding there is it's very soft. There are also some compartments in it that you can easily get all you maintenance tools, strap, cables, tuner, picks, etc. in. The metal connecting the handle to the case may look thin but rest assured it is NOT cheap metal at all. Over all after reading bad reviews on other web sites I'm trying to figure out what had people complaining... if you have a C-1 style diamond series Schecter this is the case you want, it's just a great case. Recently I found out one of my buddies from a band in my area has one of these cases as well and after 3 years and countless tours up and down the east coast his case is still trooping along.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

This is a fantastic buy!! anyone who is looking at a new guitar with great quality for its price should deffinitly consider this guitar. It is a good weight and the neck is perfect thickness with great frets. The sustain is extremly long. longer than all but a few guitars ive played. I would deffinitly recommend this. It is also very versitile in playing styles. I play almost all types of music and it plays great for all of them.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

This is a great quality case for just about any Schecter Diamond Series. Pretty sturdy, the pockets give you enough space for about anything you want want to stick in your case. Not to mention pretty good looking, as well. The reason I gave it four stars instead of five is as follows: I got this case for my Damien Elite 8-string. Because everyone always talks about how snug the fit is, I was somewhat worried about how well it would fit the ridiculously wide neck on the 8-string. I figured Schecter isn't a cheap company and they would have that sort of hindsight, and it turns out I was only kind of right. The body does fit perfectly as everyone says, but the base of the neck is just a little to big to get that optimal fit. It seems pretty secure, but it's just a little awkward to get it in there just right. If there was just a little bit of extra space in the case for the neck joint, and I'm talking no more than an inch, it would be a perfect fit.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

I bought this case for my Jeff Loomis signature series 7 string and it worked out perfectly,i couldn't be happier with it.It looks awesome and is very durable,i would definitely recommend this case to anyone.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

The case is nice and molded perfectly for my C-1 guitar. It is light weight and easy to cary with the off-centered handle. Only negative thing is that the inner open storage compartments don't have lids on them so if there is anything stored in them you have to have the case flat on the ground before you open it.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

I just bought a Hellraiser C-1 guitar and need a case for it, so I figured I'd go ahead and order the case made for it instead of getting a "one size fits all" case that the local store had on hand. For the most part, I'm very happy with the puchase. The pros: 1. The construction is solid, giving you piece of mind while your baby is in tranport. 2. The metal frame and hardware are all painted black and the company logo is molded into the case, instead of just being a sticker or an enamel of some kind, giving it a sleek look. 3. The one I got has a maroon upholstery covering the inside, which accents the black cherry finish on my C-1 4. The 5-7 day delivery time was cut short when it was delivered on the 3rd day. 5. It hugs the guitar, so there is no chance of the guitar slipping around inside. The cons: 1. There are no covers on the storage compartments, so be careful when opening the case. 2. The molding inside perfectly fits the guitar, only the guitar, so you have to take the trap off every time you put the guitar in the case. 3. It does have a locking latch like a lot of cases, but like a lot of cases, the lock isn't that great and it has the same cheap looking key that most other cases have. It'll help keep an honest man honest, but a screwdriver will open it just as easy as the key. If you much traveling with your guitar, or your like me and want the best fit possible for piece of mind, then this case is perfect. If you don't like taking your strap off everytime, then you might want to go with a good SKB or Gator case instead. For me, the fit and the look make this case worth the puchase.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

I have a Hellraiser Deluxe and it fits like a glove... which means that there isn't really room for an attached strap. I can squeeze the strap in elsewhere, just not within the mold for the guitar. As a result you have to squeeze the guitar in a bit because of the increased thickness where the strap attaches to the guitar. I still like it more than the non-molded cases that allow the guitar to slide around, but I'm just putting this out there so you know to expect that.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

A pretty solid case that doesn't weigh a ton, and gets the job done. My C1 fits perfectly and is held in place very well. Plenty of internal storage space. The name engraved on the side is a nice touch, if you don't mind advertising what's in it. Only complaint is that the latches could have been a bit more rugged - I do worry sometimes if they will stand up to the abuse I give them, but so far so good, not even a hint of a problem. I am a very happy owner.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

I have 2 Schecter guitars, the 35th Anniversary C-1 and a Damien Elite. I ordered 2 of these cases for them. Each one fits like a glove and is amazing. I had another Schecter Hellraiser which I bought an aftermarket case for, and this one just blows it away. Highly recommended if you own this style of guitar.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

This case fit my Schecter C-6 Elite perfectly. Nice case, well made and lots of room for extra stuff.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

Perfectly fits my C-1 w/ Floyd Rose. The case has great, soft inside and a few open compartments for anything accessories you have... strings, capo, picks, etc. Nothing big though. Very nice and slim as far as cases go. Love the "Schecter Guitar Research" embedded logo on the top of the case. Let's everyone know what's up and what you're packing.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

This is a perfect case. I literally raps around the guitar. if you travel with your guitar from place to place this is a must have. Solid, hard shell and plush interior.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

I wanted something more substantial than a gig bag for taking my Schecter Gryphon to my lesson, and this was perfect. If you have a diamond series Schecter, I couldn't recommend this more. Well built, solid, not bigger than it needs to be, and it looks nice to boot. Great Case.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

My Schecter Diamond Series C-1 E/A fit in here perfectly. Very well made. Nice soft interior that holds the guitar very snug. Lots of room for strap, cord and tuner. I have a Fender case and thought I would use it for this guitar too. Thought it fit the case, the case would not close. I love my new Schecter Diamond Series Case. Now I don't have to leave my baby at home, or worry that she will get damaged in transit.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

When it is closed the top sits on the bottom in key spots so the Guitar never gets crushed,perfect space for the Guitar.Polyethylene outside with a foam backed crushed velvet inside and all aluminum powdercoated binding and hardware.A perfect fit for my Schecter C1.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

If you have a Schecter C-1, Blackjack, Hellraiser, etc. this case is the only one that gives your headstock enough clearance. It's very nicely made - very little padding, but molded perfectly to the shape of the guitar so the lack is not serious. I've heard it said that a form-fitted case is better than a heavily padded case anyway. The headstock issue was particularly important to me because my C-1 Blackjack is a six-in-line unlike any of the others, but I tried several different brands of case with current models of C-1 guitars and they all failed the 'trying to slide a credit card between the headstock and case' test - except for this one. A bit expensive, but not as much as repairing or replacing your guitar! Thanks to the lovely Julie at the SF store for makng painless the process of ordering it, using a discount coupon, having it delivered to the store and inspecting it after delivery.

Comments about Schecter Guitar Research Diamond Series SGR-1C Molded Guitar Case:

Arrived fast as fast can bee. Really swell product. Now chicks dig me