Gear SpecialistBundlingMusician
Call 866‑388‑4445 or chat for exclusive deals, plus save on orders of $199+
Radial Engineering StageBug SB-6 Passive Stereo Line Isolator
Q&A|Item #:1500000285105 POS #:115585408
6-month special financing^ + $14 back in Rewards** Limited time Learn More
Lease-To-Own Purchase OptionsLearn more
Protect your gearLearn more
Cover drops, spills or cracks with Pro Coverage
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion.
When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.
When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.
Features
- Isolator for balanced and unbalanced signals
- Eliminates hum and buzz caused by ground loops
- Exceptionally linear from 20Hz to 20kHz
- Automatically configures for hi-Z or lo-Z signal chains
WARNING: This product can expose you to chemicals including Titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Lead, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specs
- Input pad, 180° polarity reverse, Ground lift
- Input Connectors: 1/4" TRS
- Output Connectors: 1/4" TRS
- Construction: 14 gauge steel chassis & outer shell
- Size (L x W x D): 3.92" x 2.54" x 1.7" (100mm x 65mm x 43mm)
- Weight: 0.9 lbs (408 grams)
- Shipping size (L x W x D): 8" x 5" x 3" (203mm x 127mm x 76mm)
- Shipping weight: 1.0 lb. (453 grams)
- Power: Passive, no power required
- Conditions: For use in dry locations only between 5°C and 40°C
Warranty
90 day warranty on footswitch and tubes. One year warranty on all other products.
Featured Articles
Be the first to know about exclusive offers, tips and more.
866-498-7882 English
877-687-5402 Español