Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Radial Engineering

collapse expand iconDescription

The BT-Pro V2 is a Bluetooth-enabled direct box that enables your mixing board to make a direct wireless connection to smartphones, tablets, and other mobile devices. With a pair of balanced analog audio outputs to feed a PA system, you’re ensured professional audio quality across the board, as you’d expect from Radial. No more consumer-level cables or cobbled together adapters. Each BT-Pro V2 has a unique identifier, allowing multiple units to be used within the same building. The BT-Pro V2 can also be powered via 48V phantom from a mixing console.
Radial Engineering BT-Pro V2 Stereo Bluetooth Direct Box
Radial Engineering BT-Pro V2 Stereo Bluetooth Direct Box

collapse expand iconFeatures

  • Wirelessly connect smartphones and tablets to a mixer
  • Bluetooth reception of up to 30 meters (100ft)
  • Dual balanced XLR outputs feed the PA system
  • Powered via external supply or 48V phantom power
  • Unique device ID allows multiple BT-Pro’s in a single location
warning

WARNING: This product can expose you to chemicals including Titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Lead, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

Electronics
  • Audio circuit type: Bluetooth A2DP transceiver with audio line drive
  • Frequency response: 20Hz to 20KHz
  • Dynamic range: 90dB
  • Total harmonic distortion: 0.05%
  • Output Impedance: 150Ω
  • Signal to Noise: 90dB
  • Bluetooth Compliance: Bluetooth 5.0
  • Data Compression: SBC Codec
  • Data Compression: All Bluetooth A2DP compliant devices
Features
  • Mono Sum, Ground lift, Level Control, Headphone
  • Input Connectors: Bluetooth 5.0, Device range up to 100'
  • Output Connectors: XLR-M, 3.5mm TRS Headphone
  • Extras: Included power supply
General
  • Construction: 14 gauge steel outer shell, molded nylon insert
  • Finish: Durable powder coat
  • Size (L x W x D): 3.3” X 5” X 2” (84 x 127 x 51mm)
  • Weight: 1.1lbs (500g)
  • Power: USB-C connector (Power Only) or 48V Phantom
  • Conditions: For use in dry locations only between 5°C and 40°C
  • Warranty: Radial 3-year, transferable

collapse expand iconWarranty

90 day warranty on footswitch and tubes. One year warranty on all other products.

Featured Articles

collapse expand iconReviews

Be the first to review the Product

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.