Proline

Description

The Proline SPS301 speaker stand is design for performers, DJs, schools and other venues that utilize portable PA systems. It’s ideal for speakers up to 60 pounds, providing an abundance of security and convenience features in a lightweight, easy-to-transport design.

The SPS301 adjusts from 31.5” to 45.7” (800 mm–1,160 mm) for optimal speaker placement, with a wide leg spread that mitigates accidental tip-overs. A friction-locking height adjustment defends against shaft slippage, while a backup shaft-ring locking mechanism ensures complete placement safety. Its robust steel bolt, washer and nut keeps the SPS301 stable even under maximum load and handling. And its collapsible legs and shaft, plus the convenient carry bag, make transporting and storing the SPS301 quick and easy.
Proline SPS301 Lightweight Adjustable Speaker Stand With Carrying Bag - Black
Proline SPS301 Lightweight Adjustable Speaker Stand With Carrying Bag - Black
Proline SPS301 Lightweight Adjustable Speaker Stand With Carrying Bag - Black

Features

  • Height adjustable from 31.5" to 45.7" (800 mm–1,160 mm)
  • Wide leg spread mitigates accidental tip-overs
  • Fits 1-3/8" or 35 mm diameter shaft mount speakers
  • Safety-first shaft-ring locking mechanism
  • Friction-locking height adjustment design
  • Compatible with most current pole-mount speakers
  • Robust steel bolt, washer with nut fasteners
  • Collapsible legs and shaft for easy transport
warning

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Featured Articles

Reviews

4.82

45 Reviews

100%

of respondents would recommend this to a friend

Most Liked Positive Review

4

A great lightweight stand for appropriate uses.

This is a great lightweight stand, at a reasonable price. The only caveats are that it does not (nor should it, at this weight and leg spread) hold speakers overhead, to get the sound out to a large crowd; that's the job of full size, heavier, more expensive stands. And it tends to lean just a bit, from the combined slack in the speaker fitting and the stand tubes. Careful application of black electrical tape will take up the slack, and make your speaker look more vertical, and centered.

VS

Most Liked Negative Review

3

Good for light duty

Light duty version of speaker stands. Only extends about 4 feet, not high enough for a larger venue.

Filters
Best Uses
  1. Performances29
  2. Outdoor Events / Games23
  3. Home Studio21
  4. Pro Audio / DJ / Mixing9
  5. Professional Recording7
Cons
  1. Leans a bit due to tube slack1
  2. Not full height for getting the sound overhead1
  3. Unstable1
  4. End cap comes off1
Describe Yourself
  1. Experienced23
  2. Professional Musician17
  3. Novice5
Pros
  1. Compact42
  2. Portable41
  3. Stable41
  4. Holds Items Securely34
  5. Reasonably priced1
  • Very happy with the product. Great price

    5

    submitted11 days ago

    byArmen

    fromPhiladelphia PA

    Submitted as part of a sweepstakes

    Very compact and easy to use stand for semi-professional usage. Needed this in a pinch as the stand for upcoming show broke. This item was identified as used but was packaged as new. Must've been a return

  • A great lightweight stand for appropriate uses.

    4

    submitteda month ago

    byCD

    fromMaine

    Submitted as part of a sweepstakes

    This is a great lightweight stand, at a reasonable price. The only caveats are that it does not (nor should it, at this weight and leg spread) hold speakers overhead, to get the sound out to a large crowd; that's the job of full size, heavier, more expensive stands. And it tends to lean just a bit, from the combined slack in the speaker fitting and the stand tubes. Careful application of black electrical tape will take up the slack, and make your speaker look more vertical, and centered.

  • Good quality stuff

    5

    submitteda month ago

    byMichael

    fromDenver Colorado

    Submitted as part of a sweepstakes

    Holds speaker adequately

  • I would buy this product again.

    5

    submitteda month ago

    byDominick

    fromPalm Desert Store

    Submitted as part of a sweepstakes

    I bought two of these stands for my speakers when needed but currently I am using one of them for my Bose amplifier. It's the perfect height and size.

  • Good for light duty

    3

    submitteda month ago

    byRobert

    fromPrescott Valley, AZ

    Submitted as part of a sweepstakes

    Light duty version of speaker stands. Only extends about 4 feet, not high enough for a larger venue.

  • yes, great product , lightweight, perfect for my speakers

    5

    submitted2 months ago

    byWilliam

    fromEnglewood Florida

    Submitted as part of a sweepstakes

    speaker stand is great. It's lightweight. We use it for small gigs appreciate being able not to carry heavy things anymore.

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byMel

    fromColumbia , MD

    How tall does this stand go up. Is it 5 feet or 6 feet ?

    Open Reply - Gear-Support
    31.5” to 45.7” . That's a little less than 4 feet.
  • asked byWilliam

    fromJackson Missouri

    Maximum weight they hold. Looking for something to hold a ev ekx 15 powered cab. Want something low. Im.a drummer

    Open Reply - Gear-Support
    It’s ideal for speakers up to 60 lbs.
  • asked byBig O

    fromWest Covina, CA

    Can I put a jbl partybox 110 speaker on it?

    Open Reply - Gear-Support
    The SPS301 will work if your Partybox is mountable.
  • asked byVAUX

    fromCabin John, MD

    Will this stand work with the Electro-Voice ZLX-12BT 12" speaker?

    Open Reply - Gear-Support
    Yes it will fit the Electro-Voice ZLX-12BT 12" speaker.
  • asked byNorman

    fromBronx ny

    Is the proline compatible with the harbinger speaker

    Open Reply - Gear-Support
    It will f it most Harbinger speakers, but it depends on the model.
  • asked byRay

    fromLong Beach, CA

    Will it work for Yamaha Stagepass 600i speakers?

    Open Reply - Gear-Support
    Yes, it will fit a Yamaha Stagepass 600i speaker.
  • asked byRuceb

    fromJacksonville, FL

    Will this fit my JBL EON One compact PA speaker ?

    Open Reply - Gear-Support
    Yes, this will fit a JBL EON One compact PA speaker.
  • asked byHambone

    fromCarrollton Texas

    Will this work with a Carvin AG100D?

    Open Reply - Thomas
    It hasn’t been tested but it probably will
  • asked byTee

    fromMiami,Fl

    Are these compatible with the Pioneer Dj DM-40?

    Open Reply - Thomas
    No. The DM-40 isn't mountable
  • asked byJonathan K

    fromClearwater,FL

    What is the max weight allowed on this stand?

    Open Reply - Gear-Support
    the max weight is150 lbs.
  • Previous
  • 1
  • 2
  • Next