Gear SpecialistBundlingMusician
2x Rewards thru Feb. 19
Palmer Audio Palmer Audio PLI-06 Line Level Converter 2-In 1-Out
(0)|Q&A|Item #:1500000048494 POS #:113317986
This item is backordered but is available to reserve now. You will not be charged until the item ships.
Notify me when this item is in stock.
6-month special financing^ + $9 back in Rewards** Limited time Learn More
Protect your gearLearn more
Cover drops, spills or cracks with Pro Coverage
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
In our modern world, lectures and presentations are mostly held with audio and visual media support. Connecting laptop computers to the mixing consoles of PA systems, however, can be a major problem due to incompatible connector formats. The Palmer Line Level Convertor PL-I06 is a dedicated interface to feed the unbalanced stereo signal typically provided by a laptop to the balanced (mono) microphone inputs of professional mixing desks. It mixes the stereo output to mono while impedance matching and signal balancing are achieved by a high-quality audio transformer especially designed for the unit. Moreover, it also prevents ground loops and the annoying hum they result in. The PL-I06 is entirely passive and does not require mains power or batteries.
Connecting the PL-I06
Equipment providing audio output on RCA phono sockets is connected to the PL-I06's inputs using a shielded RCA stereo cable. For best results with laptops, it is recommend using your headphones output (usually on a 3.5 mm miniature stereo socket). Use a shielded TRS mini jack to two RCA phono cable for connection to the PLI06. Place the unit close to the signal source and keep the input cable as short as possible since the unbalanced signal path is susceptible to interference. The PLI06's output is on a standard wiring male XLR connector. Use a high-quality microphone cable for connection to the mixing console. Due to the balanced lo-Z signal provided by the Palmer Line Level Converter cable lengths are uncritical while interference-free signal integrity is maintained.
Connecting the PL-I06
Equipment providing audio output on RCA phono sockets is connected to the PL-I06's inputs using a shielded RCA stereo cable. For best results with laptops, it is recommend using your headphones output (usually on a 3.5 mm miniature stereo socket). Use a shielded TRS mini jack to two RCA phono cable for connection to the PLI06. Place the unit close to the signal source and keep the input cable as short as possible since the unbalanced signal path is susceptible to interference. The PLI06's output is on a standard wiring male XLR connector. Use a high-quality microphone cable for connection to the mixing console. Due to the balanced lo-Z signal provided by the Palmer Line Level Converter cable lengths are uncritical while interference-free signal integrity is maintained.
Specs
- Product type: Line Isolators
- Channels: 1
- Inputs: 2
- Input connectors: RCA
- Input type: unbalanced
- Input impedance: 6 kOhm(s)
- Max. input level: +6 dBu
- Outputs: 1
- Output connectors: XLR
- Output type: balanced
- Output impedance: 600 Ohm(s)
- Max. output level: +6 dBu
- Transformer balanced: yes
- Ratio: 1 : 1
- Frequency response: 20 - 20,000 Hz
- Cabinet material: sheet steel/aluminium
- Cabinet surface: powder coated
- Width: 130 mm
- Depth: 60 mm
- Height: 35 mm
- Weight: 0.25 kg