Gallery
Description
Features
Specs
Reviews
Q&A
Road Runner

Description

This RRMEG ABS molded case from Road Runner is designed to fit a variety of electric guitars with various shapes. For extra protection, the exterior of the hardshell guitar case is molded and extremely roadworthy. It has a non-scratch, thicker pile, plush-lined interior with a padded neck brace and two accessory compartments—one covered and one open. This Road Runner case also has a tongue-and-groove valance, rubber feet, three riveted latches (the middle one has a lock and key mechanism)and an offset handle for easier transportation.

The soft, plush interior of the RRMEG case protects your electric guitar from scratches and nicks, plus Road Runner uses a special, eco-friendly, dye-free material, which eliminates the release of polluting byproducts into the environment.
Open Box Road Runner RRMEG ABS Molded Electric Guitar Case - Level 1
Open Box Road Runner RRMEG ABS Molded Electric Guitar Case - Level 1
Open Box Road Runner RRMEG ABS Molded Electric Guitar Case - Level 1

Features

  • Hardened, roadworthy molded shell
  • Non-scratch, thicker pile plush-lined interior cradles your guitar
  • Oversized accessory compartment
  • Padded neck brace
  • Designed to accommodate variety of electric guitars
  • Locking latch
  • Tongue-and-groove valance
  • Offset handle for better balance during transport
  • Riveted latch closures designed to take years of abuse

Specs

Internal
  • Length: 41"
  • Lower bout width: 13.5"
  • Upper bout width: 12.5"
  • Body depth: 2"
  • Body length: 18"
External
  • Length: 43"
  • Overall width including handle 16.6”
  • Overall external depth: 4.75"

Featured Articles

Reviews

4.63

108 Reviews

92%

of respondents would recommend this to a friend

Best case money can buy!!!
Mid-grade at best.
Mid-grade at best.
Don't care for this case much
Don't care for this case much
Nice case
Very rugged
Great case fits Short Scale Bass 30"
It Seems to be a good case
Good Case For The Money
Why yes, it fits a Mockingbird ...

Most Liked Positive Review

4

Why yes, it fits a Mockingbird ...

Seems like a well-built case. The inner lining is nicely plush, and the holding strap is a nice touch. If it had SKB-style latches, I'd probably give it five stars. And as can be seen in the photo, it fits a BC Rich Mockingbird like a glove. (It's a hard guitar to find cases for.)

VS

Most Liked Negative Review

3

Don't care for this case much

This case is built well, but doesn't hold neither my Schecter Demon or Jackson Dinky very well. To much room for my guitars so they move around unless I add something to help take up the space inside. I need a better fitting case so this one is going back. I do like how it holds the neck, but that's it. The headstock on both guitars also touches the bottom of the case that will in turn knock it out of tune. Good case for the right guitar, but not for mine

Filters
Best Uses
  1. Practicing25
  2. Concerts17
  3. Back-Up16
  4. Storage3
  5. Home storage only1
Cons
  1. Poor Quality4
  2. Not Functional3
  3. Difficult To Use1
  4. Very flimsy.1
  5. It's long1
Describe Yourself
  1. Experienced50
  2. Novice23
  3. Professional Musician13
  4. Child1
Pros
  1. Good Quality74
  2. Functional67
  3. Easy To Use54
  4. Improves Sound3
  5. None1

Reviewed by 108 customers

  • Fits a Revstar

    4

    submitted11 days ago

    byTerry

    fromGarnet Valley, PA

    This is the only case I found that fits a Revstar at a reasonable cost. The latches are a little finicky, but a good case overall

  • Good quality

    5

    submitted13 days ago

    byMike

    fromSyracuse, NY

    Submitted as part of a sweepstakes

    Keeps equipment safe & aecure

  • Great case for the $

    5

    submitted16 days ago

    byClay

    fromLawrenceville GA

    Submitted as part of a sweepstakes

    3rd one I got, fits my PRS SE custom 24, Jackson Dinky & Schecter Banshee.

  • This a great case very solid, nice looking inside and out

    5

    submitted5 months ago

    byScott

    fromUnion City Pa.

    Submitted as part of a sweepstakes

    This case protects my guitar with no worries solid case I couldn't be happier love it!!

  • Decent case

    5

    submitted5 months ago

    byTony

    fromQuincy, MA

    Submitted as part of a sweepstakes

    It's a decent guitar case. Seems like it will protect my guitar .

  • I would recommend this case over and over again.

    5

    Verified Buyer

    submitted10 months ago

    byMark

    fromWisconsin

    Submitted as part of a sweepstakes

    This has to be the ultimate home for your axe as you travel to rehearsal and gig to gig. Protect your investment from damage and weather.

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted7 months ago

    asked byJay

    fromCatlettsburg, Kentucky

    Will this case work for an Epiphone Les Paul Custom?

    Open Reply - Gear-Support
    The Road Runner RRMEG ABS molded electric guitar case is a universal solid-body case, ideal for single-cut and double-cut S-style guitars—but it’s not specifically shaped for Les Paul contours. Length: 41″ internal length gives ~2″ headroom—plenty of space. Width: RRMEG offers 13.5″, while LP Customs are around 13″—fits well. Depth: 2″ internal vs. 1.75″ guitar—adequate clearance for the carved maple top. The RRMEG is a universal "slab" case; the fit around the curved top and shoulders may not be snug, which can leave your guitar shifting a bit inside. Yes, your Squier Mini Jazzmaster guitar will fit in the RRMEG physically, but the fit is loose around the shoulders.

  • submitted7 months ago

    asked byPatmanky85

    fromOwensboro, KY

    Will this fit my new Gibson Les Paul modern lite?

    Open Reply - Gear-Support
    Yes, it will.

  • submitted7 months ago

    asked byShane

    fromRichland, Ms

    Will this fit an Ibanez rg320

    Open Reply - Gear-Support
    Yes, the Ibanez RG320 will fit securely in the RRMEG case.

  • submitted8 months ago

    asked byBob

    fromOrange County Calif.

    Will a left handed Les Paul fit this case well, or is their something else made for a L/H Les Paul that isn't "universal" ???

    Open Reply - Gear-Support
    A Les Paul, especially a left-handed one, likely won't fit properly: Les Pauls have a thicker, carved top and a single-cut body that’s wider and rounder than a Strat-style guitar. Even if you could squeeze it in, it probably wouldn't sit securely, which can be risky for the guitar. Please see: Musician's Gear MGMELP Molded ABS Electric Guitar Case

  • submitted8 months ago

    asked byJohnny

    fromCovina, Ca

    Will this case for a fender jazzmaster?

    Open Reply - Gear-Support
    Unfortunately, no. It's too narrow.

  • submitted9 months ago

    asked byfranko

    fromundisclosed

    will it fit an Ibanez rg 350

    Open Reply - Gear-Support
    It will fit the body but The RG350 typically comes with an Edge III or similar floating trem. Make sure there's enough clearance in the case for the bridge and bar. This case is just 2" deep.

  • submitted9 months ago

    asked byAlejandro

    fromBrownsville,TX

    will it fit schecter avenger standard ?

    Open Reply - Gear-Support
    No, it's too small.

  • submitted9 months ago

    asked byJason

    fromIllinois

    Does this fit Explorer style guitars?

    Open Reply - Gear-Support
    Unfortunately, no.

  • submitted9 months ago

    asked bySpeedster

    fromFreedom, WI

    Will this fit Jackson Soloist & Dinky models with regular & reversed headstocks?

    Open Reply - Gear-Support
    Unfortunately, no. It's too narrow.

  • submitted9 months ago

    asked byRonnie

    fromTrussville, AL

    Will this case fit the Yamaha Revstar Standard?

    Open Reply - Gear-Support
    Unfortunately, no. It's too narrow..