Gator

Description

The Gator Cases GTSA Series Molded Semi-Hollowbody Guitar Case provides airline-ready protection for ES-335-style and other semi-hollow electric guitars. Constructed from ATA-rated military-grade molded polyethylene, this rugged flight case is designed to withstand the demands of touring, air travel and frequent transport. A TSA-accepted locking center latch with red release trigger allows secure inspection during airline travel, while reinforced latch housings and a continuous valance add durability. Designed and supported in the United States by Gator’s Tampa, Florida team, the GTSA Series offers dependable protection for players traveling with their instruments.

Protective Plush Interior With Stabilizing Neck Support

This case is designed to accommodate ES-335-style and similar semi-hollow electric guitars. Inside, an EPS foam interior nest lined with plush fabric cushions the guitar and helps protect it from movement during transport. An extended reach neck cradle supports the neck for added stability, helping keep the instrument properly positioned inside the case. Finally, the ergonomic injection-molded handle provides a balanced grip for comfortable carrying between venues, studios and travel destinations.


Note: Do you have a question regarding case compatibility with your instrument? Please contact a Guitar Center Pro Gear Adviser at 866-554-8794.
Open Box Gator Flight Pro V3 TSA Series ATA Molded Gibson 335 Guitar Case Level 1 Gray
Open Box Gator Flight Pro V3 TSA Series ATA Molded Gibson 335 Guitar Case Level 1 Gray
Open Box Gator Flight Pro V3 TSA Series ATA Molded Gibson 335 Guitar Case Level 1 Gray

Features

  • Airline-ready molded case built to protect semi-hollow electric guitars in transit
  • ATA-rated military-grade polyethylene shell resists impacts and rough handling
  • TSA-accepted locking center latch allows secure inspection during airline travel
  • Reinforced latch housings and continuous valance add structural durability
  • EPS foam interior with plush lining cushions the guitar against shocks
  • Extended neck cradle supports the neck and stabilizes the instrument during transport
  • Ergonomic injection-molded handle provides balanced grip for comfortable carrying
  • Designed to fit Gibson ES-335-style and similar semi-hollow electric guitars

Specs

General
  • Product type: Electric guitar case
  • Series: GTSA Series
Construction
  • Case type: ATA molded flight case
  • Case material: Military-grade polyethylene
  • Interior material: Plush fabric
  • Padding: EPS foam
  • Neck support: Extended reach neck cradle
Hardware
  • Latch type: TSA-accepted locking center latch with red release trigger
  • Valance: Black powder-coated continuous valance
  • Handle: Ergonomic injection-molded handle
Dimensions
  • Overall length: 44.1"
  • Body length: 22.4"
  • Body height: 4.7"
  • Lower bout width: 15.9"
  • Middle bout width: 10.8"
  • Upper bout width: 12.8"
Exterior dimensions and weight
  • Length: 47.6"
  • Width: 18.8"
  • Height: 7.5"
  • Weight: 12.07 lb.
Other
  • Fits: ES-335-style and similar semi-hollow electric guitars
  • Country of origin: United States

Reviews

4.2

5 Reviews

80%

of respondents would recommend this to a friend

Filters
Best Uses
  1. Traveling, close and far1
  2. Gig Transport1
Cons
  1. Not Functional1
  2. Poor Quality1
  3. May not hold up to airline baggage handling1
Describe Yourself
  1. Experienced4
Pros
  1. Good Quality4
  2. Functional3
  3. Easy To Use1
  4. Improves Sound1
  5. Excellent Fitment1
  • yes

    5

    submitted7 months ago

    byBud

    fromAustin Tx.

    Submitted as part of a sweepstakes

    I have an ES-335 size guitar and this case fits it perfectly. Nice and snug.Case is in great concition.

  • This was a gift for my girlfriend.

    5

    Verified Buyer

    submitted10 months ago

    byAndrew

    fromHarrisburg l, PA

    Submitted as part of a sweepstakes

    The blue and gold caughtvmy eye. Then there was a blue strap, then locks. I went mad .

  • An amazing quality guitar case, Fits like a glove!

    5

    Verified Buyer

    submitteda year ago

    byPatrick

    fromRochester, MN

    Submitted as part of a sweepstakes

    Purchased this case for my Gretch 2627T, with a rotation of the Bigsby bar, this fits superbly!, This case is by far the best case I have! I understand this version is a Guitar Center exclusive and it definately lives up to its quality!

  • Do not buy for a 335

    1

    submitteda year ago

    byMatt

    fromMichigan

    I bought a 335 new from guitar center they were nice enough to give me this case and shipped the guitar inside of it no biggie because it's a tsa gator case i was thrilled about the case when i seen it instead of my expected gig bag.... long story short it dosent support the neck/headstock and caused my 335 headstock to snap at the neck do not buy for your loved guitar!!! Fit before you buy

  • Great Case for the Price Point

    5

    submitteda year ago

    byTHOMAS

    fromPORTLAND, OREGON

    I really shouldn't even qualify the statement with 'for the price point', as it's just a great case, period. I have one of these for my Les Paul Custom and love it; so, I bought one of these to transport my ES-335 and Casino (both fit perfectly). Solidly built case, no frills, TSA lock and keys. The interior is an ice blue, which is a nice change from the marigold, pink, or black of other cases. One thing to note: the outer ABS plastic will not accept decals or paint. I had a custom 'Gibson' stencil made (of the Custom Shop variety) and tried various paints, sandpaper, and mediums to get the paint to adhere, and it just won't. The hydrophobic surface is nice for water/rain, but it also means you can't stick anything to it, permanently. Just a heads up! Love these cases—highly recommended!

  • Previous
  • 1
  • Next

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byCharlie

    fromTri cities, WA

    Will this fit a BC Rich Dagger semi hollowbody guitar?

    Open Reply - Gear-Support
    Unfortunately, no.
  • asked byScottie P

    fromUtah

    Will a Gretsch G5422TDC with a bigsby fit in this case?

    Open Reply - Gear-Support
    Unfortunately, no.
  • asked byJohn

    fromTampa

    Will this fit Gretsch 5622t

    Open Reply - Gear-Support
    Unfortunately, no.
  • asked byThomas

    fromPortland, Oregon

    Will an Epiphone Casino fit in this?

    Open Reply - Gear-Support
    Yes, it will.
  • asked byIggy

    fromCape Canaveral

    Is it going to fit Gibson ES 330?

    Open Reply - Gear-Support
    Yes, it will.
  • asked byGalen

    fromWilmington,N.C.

    Yes,I don't see the actual dimensions.Could you tell me what they are inside of case..thank you,Galen

    Open Reply - Gear-Support
    Body Length 22.4" Body Height 4.5" Lower Bout Width 16.1" Middle Bout Width 11" Upper Bout Width 12.9" Overall Length 44.3"
  • asked byJeff

    fromCT, FL, NY

    Would this case fit the slightly deeper modern Gibson ES 150?

    Open Reply - Gear-Support
    Unfortunately, no.