Videos (1)

View Allarrow icon
Randy Rhoads tone w Plexitoneplay button

Randy Rhoads tone w Plexitone

Carl Martin

collapse expand iconDescription

The single-channel Carl Martin PlexiTone was designed in association with Pete Thorn, and is housed in a small pedalboard-friendly housing with three knobs and one switch. Apart from Thorn's slight modifications that give this new pedal a tighter bottom end and slightly softer high frequencies, it is exactly the same gain structure as the High Gain setting on the original Pro-Series PlexiTone. It just plays better with different amps.

The single Plexi also incorporates the new DC-DC converter circuitry, so the pedal can be powered by a regulated 9V power supply, but will still operate on the same +-12V level as the original AC powered PlexiTone. This allows Carl Martin to use the same high-quality components, which provide the same tone and headroom that make the CM Pro-Series stand out from the rest.
Open Box Carl Martin PlexiTone Single Channel Guitar Effects Pedal Level 1

collapse expand iconFeatures

  • Designed in association with Pete Thorn
  • Pedalboard friendly
  • Tighter bottom-end and slightly softer high frequencies

collapse expand iconSpecs

  • Battery: The PlexiTone does not accept the use of battery, only external power supply
  • Power consumption: max. 62 mA
  • Power supply: 9V DC (regulated), 100 mA minimum, 2.1 mm female plug, center negative (-)
  • Input: 1 mohm
  • Output: 200 ohm
  • S/N Ratio: 54dB
  • Dimensions WxDxH: 4.72" x 3.74" x 2.2"
  • Weight: 0.94 lb.

Featured Articles