Odyssey

Description

The LSTAND's unique design allows for three basic configurations: table top, clamped to a table, or clamped to the wall of a case or other sturdy vertical structure. Set it low for a minimal clearance of 6.75" or set it up to 11.5" high. The 10.75" long support arms hold laptop computers and other DJ equipment with a width of 9" or greater.

Odyssey LSTAND Laptop DJ Stand

Features

  • Laptop stand can be assembled in 3 different configurations:
  • (1) Attach to the case
  • (2) Attach to the table
  • (3) Stand alone

Specs

  • Minimum Adjustable Width: 10.5"
  • Maximum Adjustable Width: 13.5"
  • Minimum Adjustable Heights: 9.5" (back)/6.75"(front)
  • Maximum Adjustable Heights: 14.5"(back)/11.5"(front)
  • The LStand is adjustable to 4 heights and by adding the included extensions, and can be extended to fit that extra wide 17" laptop or other gear.
  • Dimensions (exterior): 10.5-15.5"W x 9.5-14.5"H x 12"D
  • Weight: 6 lbs

Reviews

4.22

9 Reviews

100%

of respondents would recommend this to a friend

Filters
Best Uses
  1. Pro Audio / DJ / Mixing2
  2. Outdoor Events / Games1
  3. Performances1
Cons
  1. Not Functional1
Describe Yourself
  1. Experienced1
  2. Professional Musician1
Pros
  1. Compact2
  2. Holds Items Securely2
  3. Portable2
  4. Stable2
  • Yes

    5

    submitted7 years ago

    byfrancisco

    fromUndisclosed

    It's a really resistant. I recommend it.

  • Nice product, will recommend!

    4

    Verified Buyer

    submitted8 years ago

    byAngel

    fromundisclosed

    It does what is intended to do! The only downfall is the bottom space not been prepared for universal products, i.e. (variety of controllers).

  • MAYBE

    3

    submitted9 years ago

    byMr. Bungle

    fromUSA

    Let me sat 1st the stand is very well made and does hold laptop very securely. If you need a laptop stand for studio, office or home use probably not what you want. Its WAY TO TALL at its lowest setting. Your laptop is a full 7 inches off the surface you put it on. So obviously sitting at a desk for work is very difficult & uncomfortable. The stand itself is of good quality and otherwise great. If you're a club dj standing up then this is your stand. If you're a producer in a studio sitting its completely useless.

  • Exactly what I needed!

    5

    Verified Buyer

    submitted10 years ago

    byThe Music Mann

    fromFort Worth, TX

    This is for my laptop when I DJ, haven't used it yet, but I tried it at home and worked fantasic.

  • Odyssey LStand Laptop dj stand

    5

    submitted16 years ago

    byDJ X

    fromBay Area, CA

    I love this stand. It's simple, does the job, and quite easy to setup. To the other guy who did the review saying he had trouble putting it together....Good luck with everything else. It was straight forward and as a mobile DJ, taking it apart and reassembling it quite easy and doesn't take much time either.

  • Not for Mobile DJs - 61 Pieces

    2

    submitted16 years ago

    byDJ Feenix

    fromArlington, VA

    s soon as I opened the box, I knew something was amiss... But I pressed on and took all the pieces out of the box, spilled the washers, wing nuts, screws, foam padding, steel and velcro (?) on the table. I picked up the instructions and ... Step 1: Take Pieces in hand. Step 2: Make Stand. Step 3... ? No step 2.5 even? "Alright, Self. It's ok, You're a smart guy. Just do what you always do and figure it out! "So washer, nut... washer... pole... pole extension... ok CRAAA....! Forgot the nut... now wrong hole... what?!" I looked at the front of the box and it looked simple enough. Made a second attempt... fumbled around for 20 minutes... I was able to put the stand together. But I never want to take it apart, which is a problem since I'm a mobile DJ and am at a different bar every night. I am going to take it apart though -- it's going back in the box and back to the store. I counted 61 pieces (including all the nuts and washers). Soon I will be counting my money back into my bank account.

  • Previous
  • 1
  • 2
  • Next

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byNathan

    fromIL

    Are clamps included with this? I don't see any in the photos.

    Open Reply - Ronald
    No. This is just for the stand.