Mission Engineering

collapse expand iconDescription

The USB Power Supply from Mission Engineering is designed to meet the power demands of today's pedalboards and mobile devices. With 8 fully isolated outputs providing 500mA and 300mA of 9V power, the USB Power Supply can handle power-hungry pedals while eliminating noise. Recharge the built-in lithium-ion battery in just 3.5 hours at 2,000mA using the included AC adapter or any standard USB charger for up to 4 hours of pedal power. The USB Power Supply also features a dedicated 5V/2.1A USB output to quickly charge your phone, tablet or other USB-powered gear.

Isolated, Regulated Power for Noise-Free Performance

Nothing ruins a performance like unwanted noise in your signal chain. The USB Power Supply's 8 isolated, regulated 9V outputs provide clean, consistent power to your pedals, eliminating ground loop hum and crosstalk. With 500mA and 300mA outputs, you'll have plenty of power for digital delays, reverbs and other current-hungry pedals. A voltage doubler cable lets you use two 9V outputs in series to power 18V pedals.

Recharge On the Go for Endless Creativity

The USB Power Supply's built-in lithium-ion battery provides up to 4 hours of power per 3.5-hour charge so you can play anywhere without being tethered to an outlet. Recharge using the included AC power adapter or any standard USB charger. With the USB Power Supply, your pedalboard is always ready to inspire.

Keep Your Mobile Devices Charged

In addition to powering your pedalboard, the USB Power Supply features a dedicated 5V/2.1A USB output to quickly charge your phone, tablet or other USB devices. Now you'll never run out of power for your music or your tech.

Reliable, Road-Ready Design

The USB Power Supply is built to handle life on the road. It features an aluminum enclosure, soft-touch power switch and LEDs to indicate power, charge level and any fault conditions at a glance. Short circuit and overcurrent protection on all outputs keep your gear safe in any situation. For maximum portability, the USB Power Supply includes a padded gig bag to carry it all.

Mission Engineering 529i Rechargeable Pedal Power Supply

collapse expand iconFeatures

  • Includes 529i power supply with internal battery, 12V wall charger, 8 x 0.82" 9V DC cables, USB charging cable, 18V doubler cable, 2 USB cables, 5 0.82" DC cables and an extra battery pack
  • Battery type: Rechargeable Lithium-Ion battery with 29.6Wh capacity
  • 4 hour runtime with a 3.5 hour charge time

collapse expand iconSpecs

  • Inputs: 5V USB 2 Type B micro, 12V 0.082" center pin negative
  • Outputs: 2 x 9V 500mA 0.082" center pin negative, 6 x 9V 300mA 0.082" center pin negative, 5V USB Type A
  • Dimensions: 5.5" x 2.75" x 1.25"
  • Weight: 1 lb.
  • Battery type: Rechargeable Lithium-Ion
  • Battery capacity: 29.6Wh
  • Battery runtime: 4 hours @500mA continuous load
  • Charge time: 3.5 hours @2000mA
  • Construction: Aluminum case, blue anodized

Featured Articles