JBL

Description

The JBL AWC15LF all-weather compact low-frequency 15" speaker is designed for environments where reliable bass reinforcement is critical, even in challenging outdoor conditions. Built with a Kevlar-reinforced 15" woofer and a durable, paintable ABS enclosure, this speaker handles up to 500W of continuous power and produces accurate low frequencies down to 45Hz. The unit comes equipped with a multi-tap transformer for 70V/100V distributed audio or direct 8 ohm use. Stadiums, arenas, and water parks rely on this weather-resistant model for everything from crowd music to public announcements. The system's IP56 rating and tough mounting bracket allow for safe installation in places exposed to rain, humidity and salt air, all while maintaining high sound quality and reliability.

Kevlar-Reinforced Woofer Delivers Deep, Reliable Bass

The speaker's 15" low-frequency driver uses a Kevlar-reinforced cone and a 3" voice coil. Kevlar resists tearing and helps reduce distortion, even during loud peaks. The long-excursion design keeps the sound clear and focused at high volumes. This construction allows the unit to deliver powerful bass with minimal risk of damage, so outdoor venues get consistent, punchy low end for music and announcements.

Weather-Resistant IP56 Rating Handles Harsh Conditions

The enclosure achieves an IP56 rating, shielding the speaker from dust, heavy rain, and salt spray when aimed at least 5° downward. The paintable, braced ABS and fiberglass cabinet resists impacts and temperature swings. The steel grille, backed by foam and mesh, blocks water and debris while letting sound pass through. Installers can deploy this unit at pools, stadiums or racetracks, knowing the audio will keep performing in tough conditions.

Outdoor-Rated Connectivity Simplifies Installation

Barrier strip terminals in a recessed cup accept bare wire, spade lugs, or open-lug connectors up to 12 AWG. The included gland nut forms a water-tight seal for cables between 0.16" and 0.36" diameter. The 300W multi-tap transformer supports distributed audio setups, while secondary safety attachment points and a heavy-duty U-bracket ensure secure mounting on walls or poles. Technicians can set up the speaker quickly and keep connections dry and protected.

Durable Construction Extends Product Life

The enclosure uses thick ABS plastic reinforced with fiberglass, braced for strength. A zinc-rich, powder-coated steel grille prevents corrosion, even near saltwater or in humid climates. The three-layer grille assembly protects the woofer while allowing air flow. The U-bracket, also powder-coated and zinc-rich, provides stable mounting. Each component is selected for long-term reliability in demanding outdoor settings.

JBL AWC15LF Speaker Experience Supports Demanding Venues

Engineers and installers rely on this model to deliver deep, clear bass in stadiums, water parks or skating rinks. The robust build and weather resistance keep the system working through heavy use and harsh environments. By choosing this speaker, venues gain powerful low-frequency sound that enhances crowd experiences and withstands the elements for years.

JBL AWC15LF All-Weather Compact Low-Frequency 15" Speaker

Features

  • 15" Kevlar-reinforced woofer delivers reliable, deep low-end performance
  • Weather-resistant IP56 rating ensures durability in outdoor environments
  • Frequency range down to 45Hz for impactful bass reinforcement
  • 300W 70V/100V transformer supports versatile installation options
  • Corrosion-resistant grille protects against water and harsh conditions
  • ABS enclosure with fiberglass bracing enhances low-frequency response
  • Included U-bracket simplifies secure mounting for outdoor setups
  • Barrier strip terminals allow easy connection with weatherproof sealing
  • Environmental testing ensures reliability under humidity, salt, and UV exposure

Specs

Acoustical Specifications
  • Frequency Range (-10dB): 45Hz–2.2kHz
  • Frequency Response (±3dB): 70Hz–1.2kHz
  • Long-Term Power Rating (IEC): 500W (2000W peak), 2 hrs; 350W (1400W peak), 100 hrs
  • Sensitivity (2.83V @ 1m): 94dB (Avg. 80Hz–300kHz)
  • Maximum SPL:
  • Direct 8 ohms: 121dB (peaks of 127dB)
  • 300W Tap: 119dB (peaks of 125dB)
  • Nominal Impedance: 8 ohms
  • Transformer Taps:
  • 70V: 300W, 150W, 75W, 38W
  • 100V: 300W, 150W, 75W
Transducers
  • Low Frequency Driver: 15" (380 mm) Kevlar-reinforced cone with weather treatment, 3" (75 mm) voice coil, long throw
Physical Construction
  • Enclosure: ABS with glass enclosure, heavily braced
  • Attachment: Two M10 (fine-thread) points for included U-bracket (reference torque 15 ft.lb / 20 N·m), M6 secondary safety attachment point
  • Grille: Corrosion-resistant zinc-rich extra-thick powder-coated steel grille, 3-layer assembly with foam and woven poly mesh backing
  • Input Connection: CE-compliant covered barrier strip terminals (accepts up to 8 mm outside / 4 mm inside open-lug, #6 or #8, bare wire up to 12 AWG, or spade lugs)
  • Cable Entry: Terminal compartment cover with gland nut for water-tight seal (accepts round-jacketed cables 4.0 mm – 9.0 mm OD)
Environmental
  • Rating: IP56 per IEC529 (minimum 5° downward aiming angle)
  • Compliance: Exceeds Mil Spec 810 (humidity, salt spray, temperature, UV) and ASTM G85 (acid-air/salt spray, 336 hrs)
Dimensions & Weight
  • Cabinet: 19.1" x 19.1" x 18.8" (486 x 486 x 479 mm)
  • Depth w/ Gland Nut: 19.9" (507 mm)
  • Depth w/ Bracket: 21.5" (546 mm)
  • Net Weight: 44.5 lb. (20.2 kg)
  • Weight with U-bracket: 50.5 lb. (23 kg)
  • Shipping Weight: 59.5 lb. (27 kg)
Included Accessories
  • U-bracket (matches loudspeaker color: gray or black), zinc-rich extra-thick powder coated steel

Featured Articles

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.