Gallery
Description
Reviews
Q&A
Ibanez

collapse expand iconDescription

The Ibanez 2LE21B Tremolo Arm is constructed from ultradurable stainless steel and features bushings for smooth play and long life. Includes 2 extra bushings. Fits clip in unthreaded 3/16" (6mm) vibrato units, including most Ibanez rocking vibrato units.
Ibanez 2LE21B Tremolo Arm Black

collapse expand iconReviews

4.39

18 Reviews

80%

of respondents would recommend this to a friend

Most Liked Positive Review

5

This fits your guitar

I've read some of the other comments so hopefully this will be helpful. This is your standard Ibanez trem arm for your Original Edge, Lo-pro Edge and Edge Pro trems. It will not fit you Edge III, Edge Zero, Edge Zero 2 or Trs trems.

VS

Most Liked Negative Review

3

Does not fit Ibanez Edge III tremolo

Item is as described. Item description fails to state incompatibility state with Ibanez Edge III tremolo. For Edge III owners, you need Ibanez part #2ED2C1B

Filters
Best Uses
  1. Practicing6
  2. Back-Up4
  3. Concerts3
Cons
  1. "Free" shipping fees reclaimed upon return.1
  2. Incompatible with Edge III Tremolo1
  3. Not Functional1
Describe Yourself
  1. Experienced6
  2. Novice3
Pros
  1. Easy To Use7
  2. Functional6
  3. Good Quality6
  4. Improves Sound1
  5. Item is as described1

Reviewed by 18 customers

  • Solid replacement

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    bySean

    fromRound Rock, TX

    Submitted as part of a sweepstakes

    Bought this for a replacement on an old RG550 and it fit super tight. Almost too tight actually! New bushings will take some time to settle.

  • Met and exceeded expectations.

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    byEdgardo

    fromJacksonville, FL

    Submitted as part of a sweepstakes

    Like for like replacement; fit as expected.

  • Fits perfectly on my guitar

    5

    submitted3 years ago

    byJohn

    fromSavannah, MO

    Great replacement part

  • Does not fit Ibanez Edge III tremolo

    3

    submitted3 years ago

    byJoe

    fromEarth, Terran System

    Item is as described. Item description fails to state incompatibility state with Ibanez Edge III tremolo. For Edge III owners, you need Ibanez part #2ED2C1B

  • Works As Intended and Feels Solid

    5

    Verified BuyerVerified Buyer

    submitted4 years ago

    byJustin B.

    fromMoorpark, CA

    The tremelo bar fits nice and snug. It stays where you want it to but does not feel overly tight. It also removes easily (with a little force) for when you want to put your guitar into a case. It also came with some replacement bushings if it starts getting loose.

  • Product is ok but shipping took too long.

    3

    Verified BuyerVerified Buyer

    submitted5 years ago

    byMarco

    fromCalifornia

    Product serves its purpose .

  • Previous
  • 1
  • 2
  • 3
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitteda year ago

    asked byHector

    fromAthens, Ga

    Will this fit on a GIO Ibanez GRG 150 (121009717)?

    Will this fit on a GIO Ibanez GRG 150 (121009717)?

    Open Reply - Gear-Support
    Yes, it will.

  • submitteda year ago

    asked byJuan

    fromCharlotte NC

    Will this fit an Ibanez GRX70QA?

    Will this fit an Ibanez GRX70QA?

    Open Reply - Gear-Support
    Yes it will.

  • submitted2 years ago

    asked bypcrib

    fromChicago

    Will this fit an early 2000's Ibanez SA-160?

    Will this fit an early 2000's Ibanez SA-160?

    Open Reply - Gear-Support
    Yes, the Ibanez 2LE21B will fit.

  • submitted2 years ago

    asked byJoe

    fromOrlando FL

    Is this the replacement for the JS100 arm? Or whatever the original and less expensive Joe Satriani signature guitar is called.

    Is this the replacement for the JS100 arm? Or whatever the original and less expensive Joe Satriani signature guitar is called.

    Open Reply - Thomas
    It hasn’t been tested but it probably will fine.

  • submitted2 years ago

    asked byCain

    fromMedford, OR

    Will this fit a 1980s Power Rocker Tremolo from an Ibanez DT250 X Series?

    Will this fit a 1980s Power Rocker Tremolo from an Ibanez DT250 X Series?

    Open Reply - Thomas
    It hasn’t been tested but it probably will

  • submitted2 years ago

    asked bySnake Plissken

    fromundisclosed

    I have a 1985 Ibanez Roadstar II RS440 with the pro rock'r tremolo system. Would the bar fit my guitar?

    I have a 1985 Ibanez Roadstar II RS440 with the pro rock'r tremolo system. Would the bar fit my guitar?

    Open Reply - Thomas
    I’m very sorry, I don’t know. I don’t have one to check. Perhaps an inquiry to Ibanez

  • submitted3 years ago

    asked byKyle

    fromGolden Valley, MN

    Would this work for a 2003 Ibanez RG120 (I think it's a FAT-10 or FAT-20 bridge)? If not, what is the right arm for that?

    Would this work for a 2003 Ibanez RG120 (I think it's a FAT-10 or FAT-20 bridge)? If not, what is the right arm for that?

    Open Reply - Thomas
    It hasn’t been tested but it probably will

  • submitted3 years ago

    asked byjeremy

    fromWest New York, NJ

    Does it fit the bridge on a Ibanez Gio GRX40?

    Does it fit the bridge on a Ibanez Gio GRX40?

    Open Reply - Thomas
    It hasn’t been tested but it probably will

  • submitted3 years ago

    asked byDJ Metal

    fromNYC, USA

    Anyone know if it would fit a 1984 Ibanez DT350 Pro-Rok'R Tremolo system? The ONE time in 38 years of owning my guitar that I did NOT put the arm back in it's case with the guitar, my cat swiped it off the night table and chewed the bejeesus out of it and ruined the entire tip end that goes into the receiver in the bridge. Even if I changed the Nylon?/Teflon? bushings it would still be messed up, so I'm hunting for a replacement that can fit.

    Anyone know if it would fit a 1984 Ibanez DT350 Pro-Rok'R Tremolo system? The ONE time in 38 years of owning my guitar that I did NOT put the arm back in it's case with the guitar, my cat swiped it off the night table and chewed the bejeesus out of it and ruined the entire tip end that goes into the receiver in the bridge. Even if I changed the Nylon?/Teflon? bushings it would still be messed up, so I'm hunting for a replacement that can fit.

    Open Reply - Thomas
    Bad kitty. I think it will fit. You may want to check with Ibanez.

  • submitted3 years ago

    asked byGouldeyecandy

    fromBig Bear City, CA

    I have an Ibanez RG570 (made in Japan) that I bought from 1990. Its been in storage, and I want to re-string it / sell it, but need the tremolo arm. Will this one work with my Ibanez RG570?

    I have an Ibanez RG570 (made in Japan) that I bought from 1990. Its been in storage, and I want to re-string it / sell it, but need the tremolo arm. Will this one work with my Ibanez RG570?

    Open Reply - Thomas
    It hasn't been tested but it probably will.
  • Previous
  • 1
  • 2
  • 3
  • Next