Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Gemini

collapse expand iconDescription

The XGA-2000 amplifier offers clean, reliable power in a durable, lightweight enclosure. If you demand professional amplification performance, the XGA-2000 is perfect for delivering pure, consistent wattage night after night.

With 2000 watts of Instant Peak Power (250 watts RMS), the XGA-2000 is ideal for powering PA systems and DJ rigs. To ensure seamless, reliable performance, the amp features front-to-rear airflow and a variable-speed cooling fan for thermal stability, along with a limiter circuit switch, DC output protection and short circuit protection.

For true connecting convenience, the XGA-2000 boasts XLR and ¼-inch balanced inputs, as well as RCA unbalanced inputs and three Speakon outputs. The unit also provides front panel indicators for Signal, Clip, Protect and Bridge, plus level controls for channels 1 and 2. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability.

With clean, dependable power in a resilient, 17-pound enclosure, the XGA-2000 offers unmatched value for anyone who is serious about sound.
Gemini XGA-2000 Power Amplifier

collapse expand iconFeatures

  • 2000 Watt IPP* High Power output to drive professional loudspeakers without clipping
  • Front-to-rear airflow and cooling fan for thermal stability and reliability
  • XLR and ¼" (6.5mm Jack) balanced and RCA unbalanced inputs
  • Limiter circuit switch for amp output protection
  • Stereo and Mono Bridge
  • Variable speed fan for low noise
  • Comprehensive front panel indicators including signal, clip, protect and bridge
  • 3 Speakon outputs for Channels A/B/Bridge
  • 5-way binding banana plug channel outputs
  • Bridge control switch
  • DC output protection and Short circuit protection
  • Frequency response 10Hz - 50kHz at 1.5 dB
  • Ground lift switch
  • Total Harmonic Distortion: Less than 0.1%
  • Input sensitivity & Impedance: 0.77v
  • Signal to Noise (20 Hz - 20 kHz) > 90dB

collapse expand iconSpecs

  • Frequency Response 10Hz 50kHz ±1.5dB
  • Signal to Noise (LF / HF) >90dB
  • THD (LF / HF) > 0.1%
  • Input Sensitivity 0.77v
  • Maximum Input Level 21dBv/9v
  • Damping Factor (F=1kHz 8Î) >350
  • Input Impedance 20K Î
  • Fuse 5mm x 20mm AC 115v/230v 5060Hz
  • Output Stereo 8 Î 2 x 90W RMS
  • Output Stereo 4 Î 2 x 125W RMS
  • Output Bridged 8 Î 250W RMS
  • Dimensions (WxDxH) 19" x 13.8" x 3.5"
  • (482mm x 350mm x 88mm)
  • Net Weight 17.6 lbs (8 kg)

collapse expand iconWarranty

1 year limited warranty.

Featured Articles

collapse expand iconReviews

3.17

12 Reviews

33%

of respondents would recommend this to a friend

Not exactly as advertised

Most Liked Positive Review

5

Clean Decent Low End Power Amp

I purchased this for a home studio application. Hooked it up last night with some 3 Way speakers (12"" Woofer, 3 Tweeters and a horn etc) and it sounds very nice. Able to play my guitar, piano, electronic drum kit and vocals through it with very little ""air"" noise. Surprised as to how clean the sound is. I coupled this with a USB (Behringer) mixer. So far, so good!

VS

Most Liked Negative Review

1

Didn't work right, right out of the box.

Well, first off pwr light didn't light up. I still got sound, but not when I used bridge/stereo switch in bridge position. Speaker was plugged in bridge output and output from my boards AUX out, but no sound when switch was in bridge position, only sound when switched to stereo. Seem to be wired backwards. Will be returning to store.

Filters
Best Uses
  1. Amateur Recording1
  2. Outdoor Events / Games1
  3. Performances1
  4. Pro Audio / DJ / Mixing1
Cons
  1. Poor Sound Quality3
  2. Limited Functions1
  3. Weak1
Describe Yourself
  1. Experienced2
  2. Professional Musician1
Pros
  1. Easy To Use3
  2. Portable2
  3. Good Power Output1

Reviewed by 12 customers

  • Great price, hum and fans LOUD, I returned it

    2

    Verified BuyerVerified Buyer

    submitted3 years ago

    byJim

    fromWhittier CA

    Can't use, just too LOUD...

  • Too Loud to be Usable

    1

    Verified BuyerVerified Buyer

    submitted3 years ago

    byJim

    fromMinnesota

    Turned this thing on and could not believe how loud the fan was. We could not record without the fan coming through the microphone. We returned it.

  • Didn't work right, right out of the box.

    1

    submitted6 years ago

    byRockabilly Steve

    fromNorth Carolina

    Well, first off pwr light didn't light up. I still got sound, but not when I used bridge/stereo switch in bridge position. Speaker was plugged in bridge output and output from my boards AUX out, but no sound when switch was in bridge position, only sound when switched to stereo. Seem to be wired backwards. Will be returning to store.

  • I would buy it again even considered the bigger one..

    4

    Verified BuyerVerified Buyer

    submitted7 years ago

    byGREGORY

    fromUndisclosed

    The fans you can hear running...as soon as you start playing you don't notice it.. It sounds great and works well for the floor monitors... No problems... I bought a second one....

  • Fan is too noisy

    4

    Verified BuyerVerified Buyer

    submitted8 years ago

    byed

    fromundisclosed

    Works great. The fan in the unit is too noisy. You definitely know the power amp is on.

  • Not exactly as advertised

    4

    submitted8 years ago

    byRay

    fromWisconsin

    It's a good unit for the price. Be aware that there is two versions of this unit out there. The new updated unit is the one that carries the RCA inputs as described in the current specifications. I still received the one without, not an issue for me but could see this being an issue for some. I bought this as a backup while on the road. The construction is more solid than expected. As far as the fan noise goes, it's not as loud as I think some exaggerated it to be but I could possibly foresee it being an issue in a small studio environment.

  • Previous
  • 1
  • 2
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted5 years ago

    asked byCarl

    fromStockbridge ga

    I have in house stereo system just bought receiver but it not sounding loud was told I need a amplifier. Will this work for 4 15" woofer's

    I have in house stereo system just bought receiver but it not sounding loud was told I need a amplifier. Will this work for 4 15" woofer's

    Open Reply - Ronald
    We would need to know the wattage of the subs as well as some info for the rest of the setup. Give us a call at 866-498-7882 and we can get you a for sure answer.

  • submitted6 years ago

    asked byDanny

    fromTempe, az

    What is the warranty on this amplifier

    What is the warranty on this amplifier

    Open Reply - Beau
    1 year warranty. Laser assemblies on CD Players, cartridges and crossfaders – 90 days

  • submitted7 years ago

    asked byBob

    fromundisclosed

    What should the watts be on the speakers to be powered?

    What should the watts be on the speakers to be powered?

    Open Reply - Kenneth
    This has 2000 watts of Instant Peak Power (250 watts RMS)
    Open Reply - Kenneth
    This has 2000 watts of Instant Peak Power (250 watts RMS)