StudioMonitorsMixing
Focusrite RedNet X2P Audio Interface
Q&A|Item #:1500000147954 POS #:113734412
6-month special financing^ + $64 back in Rewards** Limited time Learn More
Lease-To-Own Purchase OptionsLearn more
Protect your gearLearn more
Cover drops, spills or cracks with Pro Coverage
Need Help?
Description
RedNet X2P is a compact 2x2 Dante audio interface with two microphone preamps, a stereo headphone amplifier and stereo line out to connect your studio monitors. With the device’s Dante inputs, you’ll deliver uncompressed, low-latency digital audio to your DAW—simply use a Power over Ethernet switch or PoE injector to do so.
The monitoring display allows unlimited insight and control of the mic preamps, headphone level and line out. A local input mixer allows "more me" monitoring control, while a control lockout ensures settings remain unchanged.
The two digitally-controlled mic preamps provide clean gain and each have individual phantom power, phase reverse, high-pass filter and Air controls. RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.
The monitoring display allows unlimited insight and control of the mic preamps, headphone level and line out. A local input mixer allows "more me" monitoring control, while a control lockout ensures settings remain unchanged.
The two digitally-controlled mic preamps provide clean gain and each have individual phantom power, phase reverse, high-pass filter and Air controls. RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.
Features
- RedNet X2P Unit
- Power Supply
- Cat 6 Ethernet Cable
- RedNet Control
- RedNet PCIe drivers (included with RedNet Control download)
- Audinate Dante Controller (installed with RedNet Control)
- Height: 2"
- Weight: 8"
- Length: 5.5"
- Weight: 2.87 lb.
Specs
Inputs
- Total inputs: 4
- Analog inputs: 2
- Digital inputs: 2
- Mic preamps: 2
- XLR/TRS combo jacks: 2
- XLR only jacks: 0
- 1/4” only jacks: 0
- DB25: 0
- S/PDIF in: 0
- ADAT/optical in: 0
- RCA in: 0
- AES/EBU: 0
- MADI: 0
- Dante: 2
- Analog outputs: 2
- Digital outputs: 2
- XLR out: 2
- 1/4” out:
- DB25: 0
- S/PDIF out: 0
- ADAT/optical out: 0
- RCA out: 0
- AES / EBU: 0
- MADI: 0
- Dante: 2
- Connections: Dante
- MIDI I/O: Not Specified
- Headphone output(s): Yes
- Word-clock I/O: Not Specified
- Computer platform: MAC, PC
- Phantom power: Yes
- Direct monitoring: Yes
- Onboard DSP: Yes
- Metering: Yes
- Display: Yes
- Latency control: No
- Monitor control: Yes
- Width: 14.96"
- Height: 4.72"
- Depth: 7.68"
- Weight: 2.87 lb.
- Rack-mountable: No
Warranty
All Focusrite products are built to the highest standards, and are designed to provide many years of reliable performance. In the event of a Manufacturing Defect becoming evident during the warranty period, Focusrite will ensure that the product is repaired or replaced free of charge. The warranty for any product purchased on or after the 1st January 2018 is a period of 36 months from the date of original purchase. The warranty period for products purchased on or prior to the 31st December 2017 is 24 months from the date of original purchase.
A Manufacturing Defect is defined as a defect in the performance of the product as described and published by Focusrite. A Manufacturing Defect does not include damage caused by post-purchase transportation, storage or careless handling, nor damage caused by misuse.
While this warranty is provided by Focusrite, it is fulfilled by Focusrite’s distribution partner in the country in which you purchased the product. To contact Focusrite's local distribution partner regarding a warranty issue, click here; they will advise you of the appropriate procedure for resolving the warranty issue. Note that many of the products returned under warranty are found not to exhibit any hardware fault at all. In the case of operational interruption, it’s worth checking other factors such as cables, drivers, software settings and the like, prior to returning your hardware. Contact Focusrite support first, if you experience technical issues.
In every case you will need to provide a copy of the original invoice or store receipt to Focusrite’s local distribution partner. In the event that you are unable to provide proof of purchase, you should request a copy of your receipt from the reseller from whom you purchased the product. If you purchase a Focusrite product outside your normal country of residence, Focusrite’s distribution partner in your normal country of residence will not be able to honor this limited warranty, although you may request an out-of-warranty chargeable repair.
This limited warranty is offered solely to products purchased from an Authorised Focusrite Reseller. This Warranty is in addition to your statutory rights in the country of purchase.
A Manufacturing Defect is defined as a defect in the performance of the product as described and published by Focusrite. A Manufacturing Defect does not include damage caused by post-purchase transportation, storage or careless handling, nor damage caused by misuse.
While this warranty is provided by Focusrite, it is fulfilled by Focusrite’s distribution partner in the country in which you purchased the product. To contact Focusrite's local distribution partner regarding a warranty issue, click here; they will advise you of the appropriate procedure for resolving the warranty issue. Note that many of the products returned under warranty are found not to exhibit any hardware fault at all. In the case of operational interruption, it’s worth checking other factors such as cables, drivers, software settings and the like, prior to returning your hardware. Contact Focusrite support first, if you experience technical issues.
In every case you will need to provide a copy of the original invoice or store receipt to Focusrite’s local distribution partner. In the event that you are unable to provide proof of purchase, you should request a copy of your receipt from the reseller from whom you purchased the product. If you purchase a Focusrite product outside your normal country of residence, Focusrite’s distribution partner in your normal country of residence will not be able to honor this limited warranty, although you may request an out-of-warranty chargeable repair.
This limited warranty is offered solely to products purchased from an Authorised Focusrite Reseller. This Warranty is in addition to your statutory rights in the country of purchase.
Featured Articles
Be the first to know about exclusive offers, tips and more.
866-498-7882 English
877-687-5402 Español