Gallery
Description
Features
Specs
Reviews
Q&A
Electro-Voice
Description
The RE-2 Wireless Microphone system combines frequency agility and ease of use like no other. The RE-2 transmitters and receivers operate over a 24 MHz band width in the UHF portion of the Radio Frequency spectrum. The high quality audio circuitry and advanced Radio Frequency (RF) signal processing offer broadcast quality signal-to-noise and audio clarity. The RE2-N7 System includes the RE-2 Diversity Receiver and the HTU2PRO Transmitter with N/D 767a Cardiod Dynamic Microphone Element.
Electro-Voice RE2-N7 Wireless System with EV 767a Dynamic Element
Electro-Voice RE2-N7 Wireless System with EV 767a Dynamic Element
Electro-Voice RE2-N7 Wireless System with EV 767a Dynamic Element
Features
RE-2 Receiver
  • One-touch Auto-ClearScan
  • Programmable in 25kHz steps across 28 MHz
  • operating bandwidth
  • Backlit LCD displays the Group, Channel, Frequency, transmitter battery level, diversity operation, RF, and Audio signal level meters
  • Balanced XLR audio output for Microphone or Line level signals and a
  • 1/4-inch line level jack
  • Fourth-generation Posi-phase diversity and advanced audio circuits
  • Unique "Guitar" setting
  • Detachable 1/4 wave antennas
RE-2 UHF Transmitter
  • Unique "smart" battery
  • LCD Displays Group and Channel, Frequency, or Battery Level
  • Low battery LED
  • One On/Off button that also acts as a mute
  • On/Off button can be disabled
RE-2 UHF Handheld
  • NDYM 767a Dynamic premium vocal microphone
  • with VOBTM(Vocal-Optimized-Bass)
  • Internal 1/2-wave antenna
Specs
RE-2 Receiver
  • Receiver Type: Synthesized PLL
  • Frequency Range (RF): A Band 648 - 676 MHz (TV Channels 43 - 48),
  • B Band 696 - 724 MHz (TV Channels 54 - 56), D Band 798 ” 822 Mhz, E Band 841 ” 865 MHz
  • Number of Channels: >1122 possible frequencies, programmable in 25 kHz steps
  • Modulation: +/- 40 kHz
  • Diversity: Digital Posi-Phase True Diversity
  • RF Sensitivity: <1.0 _V for 12 dB SINAD
    Image Rejection: >60 dB
  • Squelch:Tone Code plus Amplitude
  • Ultimate Quieting: >100 dB
  • FCC Certification: Approved under Part 15
  • Power Requirements: 12-15V AC/DC, 300mA
  • Antennas Detachable: 1/4 wave
  • Receiver Dimensions: 1.72 in. H x 7.50 in. W x 5.9 in., D 43.69 mm H x 190.50 mm W x 150 mm D
Audio Parameters
  • Frequency Response: 50-15 kHz +/- 2dB
  • Balanced Output (typical): (max @ 40 kHz deviation) 330mV RMS 100K OHM Load, Mic Position, 10mV to 2V RMS 100K OHM Load, Line Position
  • Unbalanced Output: adjustable 10 mV to 1V RMS, 100K OHM Load
  • Distortion: <1.0%, 0.5% typical (ref 1kHz, 40kHz deviation)
    Signal-to-Noise Ratio: >100 dB A Weighted
  • Dynamic Range: >100 dB
  • Transmitter: HTU-2
  • Radiated Output: 30 mW Typical
  • Microphone Head: N/D 767a supercardioid N/DYM dynamic
  • TA4F Connector Wiring: Pin 1: Ground; Pin 2 Mic Input;
  • Pin 3: +5V bias; Pin 4: +5V bias through a 3k
  • Audio Gain Adjustment Range: 40 dB BPU-2
  • 26 dB HTU-2
  • Power Requirements: 9 Volt Alkaline Battery
  • Battery Life (Typical): >8 hours with 9-Volt Alkaline Typical
  • Handheld Antenna: Internal 1/2 wave
  • Dimensions (Handheld): 24.0 cm (9.4 in.) Long
Transmitter
  • Radiated Output Normal 5 mW typical, High 50 mW typical
  • Microphone Head: 767a Supercardioid N/DYM Dynamic
  • Handheld Antenna: Internal 1/2 wave
  • Dimensions (Handheld): 26.8 cm (10.5 in.) Long
Reviews

5

2 Reviews

0%

of respondents would recommend this to a friend

Reviewed by 2 customers

  • Must have for wireless

    5

    submitted19 years ago

    byAll Star DJ's

    fromFort Wayne, Indiana

    We purchased this unit about a month ago after our AudioTechnica wireless mic's cut out on us at a wedding reception (300+ people). We picked up this unit from the Fort Wayne Indiana store the next day. We used it at a 3 point shooting contest with over 3,000 people in attendance. Not one single drop over a 3 hour period of constant use. Simple to use with the one touch scan button, and comes with a very durable case for transportion. All in all, this is a must buy for any mobile DJ or anyone needing a reliable wireless mic.

  • An excellent alternative to Shure products

    5

    submitted19 years ago

    byFuzzball

    fromIda, MI

    I purchased this item one day to try something different than the Shure wireless systems. I was very happy with the Re-2 unit. The reciever has a one touch auto-clear scan button (very easy to use). The unit can locate the best channel very quickly . The reciever also has a balanced XLR output and a switchable mic/line level and 1/4" line level output providing the user with many options. The unit does a very good job at maintaining a strong signal. The mic is also very usable but I found it to work better for male voices than female voices. If you want to try a different brand than Shure for a wireless system I would recommend giving this unit a try.

  • Previous
  • 1
  • Next
Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.