Gallery
Description
Features
Specs
Reviews
Q&A

collapse expand iconDescription

The Dynacord C3600FDi DSP is a dedicated installation DSP amplifier optimized for 24/7 operation. Besides low impedance operation (2 Ohms, 4 Ohms or 8 Ohms), the C3600FDi can drive 100 V loudspeaker lines directly (‑1.5 dB) without output transformers. Integrated digital signal processing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilize Class A/B resp. Class H topologies, which provide market-leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For low cost of ownership, a power saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.
DYNACORD C3600FDi DSP 2 x 1800 W Power Amplifier for Fixed Install Applications
DYNACORD C3600FDi DSP 2 x 1800 W Power Amplifier for Fixed Install Applications
DYNACORD C3600FDi DSP 2 x 1800 W Power Amplifier for Fixed Install Applications

collapse expand iconFeatures

  • Professional DSP amplifier for live and mobile application
  • Fully integrated professional speaker processing with FIR drive technology
  • Market-leading acoustic performance and rock-solid reliability
  • Intuitive, simplified setup, control and operation in SONICUE sound system software with firmware 2.0

collapse expand iconSpecs

  • Load Impedance
  • 2 Ω
  • Maximum Output Power, Single Channel: 3200 W
  • Maximum Output Power, Dual Channel: 3000 W
  • 2.7 Ω
  • Maximum Output Power, Single Channel: 2700 W
  • Maximum Output Power, Dual Channel: 2500 W
  • 4 Ω
  • Maximum Output Power, Single Channel: 1800 W
  • Maximum Output Power, Dual Channel: 1700 W
  • Maximum Output Power, Bridged: 6000 W
  • 8 Ω
  • Maximum Output Power, Single Channel: 950 W
  • Maximum Output Power, Dual Channel: 900 W
  • Maximum Output Power, Bridged: 3400 W
  • Direct Drive
  • 2 Ω: 70 V Operation
  • 4 Ω: 100 V Operation
  • Load Capability
  • 2 Ω: Not recommended
  • 4 Ω: 2 x 1250 W (-1.5 dB)
  • Dual Channel Bridged
  • 2 Ω: Not recommended
  • 4 Ω: Not recommended
  • Maximum RMS Voltage Swing THD = 1%, 1 kHz: 96.6 V
  • Voltage Gain Ref.1 kHz: 32.0 dB
  • THD at 900 W/4 Ω MBW = 80 kHz, 1kHz: < 0.05%
  • IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
  • DIM30,3.15 kHz, 15 kHz: < 0.05%
  • Maximum Input Level: +21 dBu
  • Crosstalk ref. 1 kHz, at 100W/4 Ω: < -80 dB
  • Frequency Response, ref. 1 kHz: 10 Hz to 21 kHz (±1 dB)
  • Input Impedance, Active Balanced: 20 k Ω
  • Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω: >109 dB
  • Output Noise, A-weighted: < -68 dBu
  • Output Stage Topology: Class H
  • Power Requirements: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
  • Power Consumption ⅛ Maximum Output Power @ 4 Ω: 850 W
  • Mains Fuse: 240 V/230 V: T15AH; 120 V/100 V: T30AH
  • Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
  • Cooling: Front-to-rear, 3-stage-fans
  • Ambient Temperature Limits: +5°C to +40°C (40°F to +105°F)
  • Safety Class: I
  • Color: Black
  • Weight: 18.2 kg (40.1 lb)
  • Remote Power ON/GPIO: Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
  • Signal Processing: FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
  • Remote Control: SONICUE sound system software **
  • Accessories: RMK15 (rear rack mount kit)

Featured Articles