Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Crown

Description

The Crown XLS1002 power amplifier provides 350W of ultraefficient power to drive your speakers. With Crown's patented DriveCore technology under the hood, the XLS1002 delivers high power output, very low distortion, and superior sound quality for live performance or installed applications. From managing input sensitivity to toggling amp modes, full customization is only a few clicks away on the front panel's user-friendly LCD screen and dedicated menu buttons.

Pure, Powerful Sound

The XLS1002's Class-D amplifier design provides high power density, light weight, and energy efficiency. Its onboard DSP offers a selection of filters including high-pass, low-pass and band-pass filters up to 3,000Hz with a 24dB/octave slope. With a frequency response of 20Hz to 20kHz and a damping factor of >500 at 8 ohms, the XLS1002 reproduces audio signals with stunning accuracy and musicality.

Flexible Connectivity

The XLS1002's rear panel is equipped with a variety of inputs and outputs to suit any setup. Add additional amps through 1/4" line-level outputs, Neutrik speakON outputs and binding posts. A circuit breaker provides overload protection for your components. With XLR, 1/4" TRS and RCA input connectors, the XLS1002 can handle balanced or unbalanced signals from mixing consoles, wireless systems or playback devices with ease.

Road-Ready Reliability

As part of Crown's popular XLS Series of power amplifiers, the XLS1002 is a rugged, affordable and high-performance solution for working musicians and audio professionals. Its durable build quality and smart design ensure years of trouble-free operation. Additional features like front-mounted level controls, clip indicators and power switches offer convenient monitoring and control of your signals in any live sound application.

Unmatched Versatility

The XLS1002's bridgeable design provides 350W at 4 ohms in bridged mono mode or 175W per channel at 8 ohms in stereo mode. With a sleek new look and a display three times larger than its predecessor, the XLS1002 combines power, control and style. Crown Audio is thrilled to offer the Crown XLS1002, a powerful yet affordable amplifier with the flexibility to suit any sound reinforcement need.

Crown XLS1002 2-Channel 350W Power Amplifier With Onboard DSP
Crown XLS1002 2-Channel 350W Power Amplifier With Onboard DSP
Crown XLS1002 2-Channel 350W Power Amplifier With Onboard DSP

Features

  • Class-D amp with Crown's ultraefficient DriveCore technology weighs less than 11 lb. (5 kg)
  • Higher DSP capabilities: More control; has band-pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx Limiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA inputs provide flexibility
  • Integrated PureBand Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Specs

  • 2-ohm Dual: 550W
  • 4-ohm Dual: 350W
  • 8-ohm Dual: 215W
  • 4-ohm Bridged: 1,100W
  • 8-ohm Bridged: 700W
  • Sensitivity: 1.4Vrms
  • Frequency Response: +0dB, -1dB
  • Signal to Noise: > 97dB (at .775Vrms sensitivity, 6dB lower)
  • Intermodulation Distortion: < 0.3%
  • Damping Factor: > 200
  • THD: < 0.5%
  • Crosstalk: At 1kHz: > 85dB, At 20kHz: > 55dB
  • Dimensions: 19" (48.3 cm) x 3.5" (8.9 cm) x 7.7" (19.6 cm)
  • Weight: 8.6 lb. (3.9 kg)

Warranty

3 year, no-fault parts and labor warranty on amps.
3 year warranty for most mics.
1 year warranty for Soundgrabber mic.
Crown Extended Warranty available as an option.

Featured Articles

Reviews

4.63

16 Reviews

100%

of respondents would recommend this to a friend

Most Liked Positive Review

5

It's a Crown, enough said?

The size and weight of this amp almost make it seem cheap but in reality this is what makes it amazing. I have very efficient speakers so I didn't need the highest power model but the specs seem the same in the line and replacing an older amp with the Crown shed about 20 pounds from my rack. I have it in a road case rack which spends most of it's time powering studio monitors and it seems very clean. The only thing I had to change was my speaker cables because the Crown doesn't have 1/4 inch jacks so you need either an adapter on speakon connectors. I can't comment on the different operating modes which are all configured by the front panel, it defaults to stereo out of the box and that's how I use it.

VS

Most Liked Negative Review

3

A little disappointed.

I bought this amp to power a pair of stage monitors. I was attracted by the low weight and my previous positive experience with Crown power amps. The amp adequately powers the monitors but does not sound as good as the older Crown X2000 I own. In addition, the power supply cord which comes with the amp is only 32 inches long which is the shortest I've seen on any piece of gear and problematic for stage setups. Not a good place to cut corners.

Filters
Best Uses
  1. Home Studio4
  2. Performances4
  3. Amateur Recording2
  4. Church1
  5. Outdoor Events / Games1
Describe Yourself
  1. Experienced8
  2. Professional Musician2
  3. Novice1
Pros
  1. Excellent Sound9
  2. Easy To Use8
  3. Good Power Output6
  4. Portable3
  5. Warm / Comfy2

Reviewed by 16 customers

  • Good sounding - reliable brand

    5

    submitted6 years ago

    byStan

    fromWest Monroe, LA

    I bought 2 of these for my church. One is close to a year old and has never missed a beat. We had another Crown amplifier for about 18 years before it started being unreliable. I trust the brand.

  • Good Mixer Board Amp

    5

    submitted6 years ago

    byDave

    fromKY

    Make sure you purchase 2 Speakon for your Outputs.

  • It's a Crown, enough said?

    5

    submitted6 years ago

    byMichael

    fromOhio

    The size and weight of this amp almost make it seem cheap but in reality this is what makes it amazing. I have very efficient speakers so I didn't need the highest power model but the specs seem the same in the line and replacing an older amp with the Crown shed about 20 pounds from my rack. I have it in a road case rack which spends most of it's time powering studio monitors and it seems very clean. The only thing I had to change was my speaker cables because the Crown doesn't have 1/4 inch jacks so you need either an adapter on speakon connectors. I can't comment on the different operating modes which are all configured by the front panel, it defaults to stereo out of the box and that's how I use it.

  • Great product and Company

    5

    submitted6 years ago

    byTim

    fromNorth America

    Live performance

  • This thing works magic

    5

    submitted6 years ago

    byJohnny

    fromKilleen Texas

    I have this powering some older Cerwin Vega folded horns very efficient subs it gives them enough juice to shake the entire house and everything in it and so light weight I can only imagine what the bigger amps in the xls series can do

  • Great Amp

    5

    submitted7 years ago

    bySound freak

    fromGilbert AZ

    I have a studio loaded with high quality sound equipment. It's not being used in there. Its being used in my audiophile system in my front room temporarily while my 3000 dollar amp is being upgraded. It sounds great powering my Klipsch Cornwalls!

  • Previous
  • 1
  • 2
  • 3
  • Next

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted3 years ago

    asked byIsrael

    fromhouston, tx

    I have 2 passive speakers that both individually have the specifications of 8 ohms in impedance and 225W in power handling. would this power amp be good for those speakers?

    Open Reply - Thomas
    Excellent..

  • submitted4 years ago

    asked by0v3rk1ll

    fromundisclosed

    what I care the most about is for the amp not to have any signal noise. Is this clean. I've had some from other brands that are just awful.

    Open Reply - Ronald
    All my experiences with Crown have been good as far as signal or background noise has been, as long as you're plugged into a well grounded outlet you'll be set.

  • submitted7 years ago

    asked byBrian

    fromIowa

    Can I still use 1/4 output cables with this amp, or will I have to buy the Speakons?

    Open Reply - Beau
    1/4" cables can be used with this power amp.