Gallery
Description
Features
Specs
Reviews
Q&A
Markbass
Description

The Markbass Little Mark Tube 800 bass amp head is a pioneering solution for bassists seeking power, tonal flexibility and portability. This 800W amplifier features Markbass's groundbreaking tube and solid-state preamp design which provides the warmth and richness of a tube preamp as well as the crisp attack of a solid-state preamp. Bassists can blend between the two preamps to find their perfect tone. Two inputs with separate gain controls—one 1/4" jack and one combo XLR/1/4" jack—make it easy to plug in and dial in your ideal level.

Miniature Tube and Solid-State Preamps Create a Spectrum of Sounds

At the heart of the Little Mark Tube 800 are its tube and solid-state preamps. The tube preamp delivers the full, heavy tone that tube enthusiasts crave while the solid-state preamp provides a clean, punchy foundation. Blending between the two unlocks a range of tones from vintage to modern. Bassists can go from a crisp solid-state tone to a warm tube tone and everything in between.

Vintage Loudspeaker Emulator and Variable Preshape Filter Shape Your Tone

The Vintage Loudspeaker Emulator recreates the tone of classic bass cabinets while the Variable Preshape filter provides access to a range of timbres from traditional to contemporary Hi-Fi sounds. With these tone-shaping tools, bassists can craft tones from classic rock to modern electronica and beyond.

Phantom Power and XLR Input for Upright Bass

The Little Mark Tube 800 makes it easy to amplify an upright bass. The combo XLR/1/4" input accepts either a standard 1/4" bass cable or an XLR cable from an upright bass microphone. Engaging the phantom power switch provides 48V of power for condenser microphones. Upright bassists can achieve a full, natural tone when plugging in their bass.

Roadworthy Design With Useful Features

Despite its power and tube preamp, the Little Mark Tube 800 weighs only 15 lb., making it ideal for gigging and studio use. A mute switch, four-band EQ and pre/post EQ switch for the XLR output provide useful tone shaping and control. Rack ears are available separately for mounting in a rack.

Markbass Little Mark Tube 800 Bass Amp Head
Markbass Little Mark Tube 800 Bass Amp Head
Markbass Little Mark Tube 800 Bass Amp Head
Features
  • 1 1/4" input,
  • 1 XLR or 1/4" input
  • 500W RMS @ 8 ohms, 800W RMS @ 4 ohms
  • Gain controls for each input
  • Master Volume
  • Line Out Level
  • Ground Lift switch (rear)
  • Pre/Post EQ switch (rear)
  • Mute Knob
  • Low, Mid, High EQ
  • Variable Preshape Filter
  • Vintage Loudspeaker Emulator
  • Balanced XLR line out
Specs
Input 1
  • Impedance: 500 kohm
  • Maximum Voltage: 15V
Input 2 (Balanced XLR/1/4" combo)
  • Impedance: 500 kohm
  • Maximum Voltage: 15Vpp
  • Phantom power: 48V
Effect Return
  • Impedance: 33 kohm
  • Maximum Voltage: 10Vpp
Controls
  • Gain 1: -60dB to +23dB range; Gain 2: -60dB to +23dB range
Equalization
  • Low center frequency: 40Hz; level: ±16dB
  • Low Mid center frequency: 360Hz, level: ±16dB; High Mid center frequency: 800Hz, level: ±16dB;
  • High center frequency: 10kHz, level: ±16dB; VPF (Variable Pre-shape Filter) center frequency: 380Hz (cut); VLE (Vintage Loudspeaker Emulator) frequency range: 250Hz–20kHz (cut)
  • Weight: 6.31lb.
  • Dimensions (HxWxD): 2.8" x 10.87" x 10.1"
Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitteda year ago

    asked by子瑩

    fromundisclosed

    hi,it's 120V? 230V?

    Open Reply - Gear-Support
    120 V

  • submitted2 years ago

    asked bya.G.

    fromNashville, TN

    XLR line out in the back not working - Do you repair?

    Open Reply - Gear-Support
    Please bring it to a local GC store.

  • submitted2 years ago

    asked byboss

    fromundisclosed

    is this manufactured in Italy?

    Open Reply - Gear-Support
    No, it's made in Indonesia.

  • submitted3 years ago

    asked byConcert Tom

    fromNorth Carolina

    Can you use with two speakers (8 ohms each)?

    Open Reply - Thomas
    Yes

  • submitted4 years ago

    asked byEric

    fromChicago Heights IL

    I bought the little tube 800 played it one time tried to play at a gig o sound from the amp period

    Open Reply - Kenneth
    Please contact a Customer Service Agent for trouble shooting inquiries

  • submitted5 years ago

    asked byShane

    fromJonesboro, AR

    In description it says this amp (Markbass little mark tube 800) is built to operate at the country of manufacturer's voltage and can't be changed. Will this amp operate on USA 120v?

    Open Reply - Thomas
    Yes, it will

  • submitted5 years ago

    asked byJason

    fromSedro-Woolley Wa

    How do you or can you run multiple cabinets with this head?

    Open Reply - Thomas
    You can: keep in mind it is 4 ohm load so you could parallel 2 8 ohm cabinets but no more

  • submitted6 years ago

    asked byCopeland

    fromWaterbury ct

    Which is the best bass cab for little Marcus 800. 104 hf or 104hr

    Open Reply - Kenneth
    It will depend on the tone you want. The only requirement is that the wattage matches between the head and cab

  • submitted7 years ago

    asked byJason G

    fromHarrisburg PA

    Any recommendations on getting this unit repaired? Mine stopped powering on!

    Open Reply -
    I would recommend checking in with the manufacturer. Mark Bass' website should have information about repairs and they may have something locally you can take it to.