Open Box Gibson ES-335 Original Hardshell Case Level 1 Brown

Given these measurements, the ES-135 is slightly narrower and shallower than the ES-335. While the ES-135 may fit within the ES-335 case, the fit might not be snug, potentially allowing the guitar to move within the case. This could lead to insufficient protection during transport.

Yes, it will.

The Gibson ES-335 Original Hardshell Case is designed specifically for the ES-335 semi-hollow body shape, and while it's a high-quality, form-fitted case, it’s not ideal for most other body styles—especially not a solid-body classical or nylon string like the Gibson Chet Atkins CE/Studio. Body Shape & Thickness: The ES-335 has a wide lower bout and an arched, semi-hollow body. The Chet Atkins CE has a thinner, solidbody design that's more akin to an electric guitar like a Les Paul—except flatter and broader across the waist. Neck Angle & Support: The Chet Atkins nylon has a different neck angle and scale length. The molded neck support in the 335 case likely won’t align properly, leading to poor support or even potential stress on the neck. Depth Difference: The ES-335 case is much deeper due to the semi-hollow body's carved top. Your Chet Atkins would likely rattle or shift inside unless extensively padded.

The Gibson ES-335 Original Hardshell Case is very likely to fit an Epiphone Sheraton II, but not perfectly snug. The Epiphone Sheraton II and Gibson ES-335 share the same general semi-hollowbody shape and size, modeled after the original ES-335. Body width, length, and depth are very close, as the Sheraton II is essentially Epiphone’s high-end take on the ES-335. The Sheraton II’s headstock is larger than Gibson’s typical headstock, due to Epiphone’s design. It may be a tight fit or press slightly against the inside of the case at the top. The interior padding of the Gibson case is custom-molded for the ES-335, so there may be slight movement or tightness in some areas. The Sheraton II’s headstock is larger than Gibson’s typical headstock, due to Epiphone’s design. It may be a tight fit or press slightly against the inside of the case at the top. The interior padding of the Gibson case is custom-molded for the ES-335, so there may be slight movement or tightness in some areas.

1) No, this is a guitar case. 2) Road Runner RRMBA17 ABS Molded Acoustic Bass Case

No, the GPC is an acoustic guitar. Road Runner RRMAJBO ABS Molded Jumbo Acoustic Guitar Case JUMBO ACOUSTIC.

Yes, it will.

No. "Musician's Gear Deluxe Dreadnought Case Tweed"

14 lbs