Audio-Technica

collapse expand iconDescription

The length (14.53") of the Audio Technica AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.
Audio-Technica AT8035 Shotgun Microphone

collapse expand iconFeatures

  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Length is well-suited for ENG, outdoor recording and other specialized uses
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Excellent sound rejection from the sides and rear of mic
  • Switchable low-frequency roll-off
  • Operates on battery or phantom power
  • RoHS compliant”free from all substances specified in the EU directive on hazardous substances
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar pattern: Line + gradient
  • Frequency response: 40-20,000 Hz
  • Low frequency roll-off: 80 Hz, 12 dB/octave
  • Open circuit sensitivity: Phantom: ”38 dB (12.5 mV) re 1V at 1 Pa;Battery: ”39 dB (11.2 mV) re 1V at 1 Pa
  • Impedance: Phantom: 250 ohms; Battery: 300 ohms
  • Maximum input sound level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.; Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic range (typical): Phantom: 110 dB, 1 kHz at Max SPL; Battery: 98 dB, 1 kHz at Max SPL
  • Signal-to-noise ratio: 72 db, 1 kHz at 1 Pa
  • Phantom power requirements: 11-52V DC, 2 mA typical
  • Battery type: 1.5 AA/UM3
  • Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
  • Switch: Flat roll-off
  • Weight (microphone): 6.0 oz. (170 g)
  • Dimensions: 14.53" (369 mm) long, .83" (21 mm) diameter
  • Output connector: Integral 3-pin XLRM-type
  • Accessories furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
  • Audio-Technica case style: SG1

collapse expand iconWarranty

One year parts and labor warranty.

Featured Articles