Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Audio-Technica

Description

The AT-LPW50BT-RW extends Audio-Technica’s line of fully manual, belt-drive wood turntables by adding the option of wireless connectivity. Now you can enjoy optimal high-fidelity audio reproduction from vinyl with your choice of wired or wireless operation.

The AT-LPW50BT-RW features an anti-resonance 30 mm thick medium-density fiberboard plinth with a stunning rosewood-finished wood veneer. This is used to dampen low-frequency acoustical feedback. It also comes equipped with a sensor-monitored motor to ensure accurate platter rotation speeds of 33 1/3 and 45 RPM. The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and a matching matte-silver AT-HS4 universal 1/2"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a .3 x .7-mil elliptical stylus. It is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW50BT-RW is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct wired connection to components with or without a dedicated phono input. The turntable also connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology.
Audio-Technica AT-LPW50BT Manual Belt-Drive Turntable Brown
Audio-Technica AT-LPW50BT Manual Belt-Drive Turntable Brown

Features

  • Fully manual, belt-drive operation with two speeds: 33 1/3 and 45 RPM
  • High-fidelity audio with Bluetooth wireless technology
  • Motor features a speed-sensor system to maintain accurate platter rotation speed
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4 (silver) universal 1/2"-mount headshell and AT-VM95E (black)
  • Dual Moving Magnet phono cartridge with .3 x .7-mil elliptical stylus
  • The AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat and removable hinged dust cover

Specs

Communication system: Bluetooth version 5.2 RF

Output:
  • 15 mW
EIRP Maximum Communication Range: Line of sight - approx. 10 m (33')

Frequency Band:
  • 2.402 GHz to 2.480 GHz
Modulation Method: GFSK, Pi/4DQPSK, 8DPSK

Supported Bluetooth Profiles:
  • A2DP
Supported Codec: SBC

Turntable Type:
  • Belt-drive manual turntable
Motor: DC servo with Active Speed Stabilization

Drive Method:
  • Belt Drive
Speeds: 33 1/3 RPM, 45 RPM
Turntable Platter:
  • Aluminum Die Casting
Wow and Flutter: < 0.15 % WRMS (33 RPM) at 3kHz

Signal-to-Noise Ratio:
  • > 60dB
Output Level: PHONO: 4.0 mV nominal at 1kHz, 5 cm/sec LINE: 200 mV nominal at 1kHz, 5 cm/sec


Phono Pre-Amp Gain:
  • 35dB nominal, RIAA equalized
Tonearm Type: Static balanced straight carbon tonearm

Effective Length:
  • 223.6 mm
Overhang: 18.6 mm

Maximum Tracking Error Angle:
  • Less than 2.0°

Stylus Pressure Adjustment Range:

    0 to 3.0 g

    Applicable Cartridge Weight Range (including headshell):

    • 11.5 to 16.5 g

    Cartridge Model:

    AT-VM95EBK 

    • Cartridge Type:
    VM
    • Recommended Load Impedance:
    47,000 ohms 
    • Output Voltage:
    4 mV (mV at 1kHz, cm/sec)
    • Stylus:
    .3 x .7-mil bonded elliptical stylus
    • Cantilever:
    Aluminum pipe
    • Tracking Force Range:
    1.8 to 2.2 g (standard 2 g)
    • Cartridge Weight:
    6.1 g (.22 oz)
    • Headshell Model:
    AT-HS4 SV 
    • Headshell Weight:
    8.5 g (including lead wires)
    7.7 g (excluding lead wires)
    • Headshell Overhand Adjustment:
    ±5 mm
    Power Supple Requirements:
    • 100–240 , 50Hz/60Hz, .6A Max.
    Power Consumption:
    • 1.8W
    AC Adapter:
    • 12V, 1.0A
    Dimensions (WxDxH):
    • 16.54" x 13.39" x 4.96" 
    Weight:
    • 12 lb.
    Accessories Included:
    • Dust cover, Rubber mat, platter (with drive belt), dust cover hinges, counterweight, headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95EBK), 45-RPM adapter, RCA audio cable (Approx. 1.0 m/3.3'), AC adapter (Approx. 1.5 m/4.9')

    Warranty

    One year parts and labor warranty.

    Reviews

    5

    1 Reviews

    100%

    of respondents would recommend this to a friend

    Filters
    Best Uses
    1. Attentive listening1
    Cons
    1. No auto-return1
    Describe Yourself
    1. Older guy with many 70s era LPs1
    Pros
    1. Easy to set up1
    2. Good Audio1
    3. Looks good1

    Reviewed by 1 customers

    • Quality turntable

      5

      Verified Buyer

      submitteda year ago

      byAndy

      fromMount Vernon, IA

      Submitted as part of a sweepstakes

      I have a reasonable collection of LPs, but once I started buying CDs I did not much listen to vinyl and my old turntable eventually stopped working. My daughter chose this one for me and I have begun listeninbg to the LPs again. Sound is great. I would like an auto return, but having this fully manual table means I am more liely to actually sit and listen rather than juat having background music.

    • Previous
    • 1
    • Next

    Q&A

    Have a question about this product? Our expert Gear Advisers have the answers.

    • submitted3 years ago

      asked byZaid

      fromOrange County

      Does it play sound ? Do you need a speaker in order to use it ?

      Open Reply - Thomas
      You need amplification and speakers Please give us a call to help you find something – 855-770-3373