Audio-Technica

collapse expand iconDescription

The Audio-Technica AT-LPW30BKR is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an anti-resonance MDF (medium density fiberboard) plinth to limit low-frequency acoustical feedback with an aesthetically pleasing black wood veneer finish.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal 1/2"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30BKR is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Audio-Technica AT-LPW30BKR Fully Manual Belt-Drive Turntable Black

collapse expand iconFeatures

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminum platter with rubber mat
  • AT-HS4 universal 1/2"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
  • AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer finish
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat and removable hinged dust cover

collapse expand iconSpecs

General
  • Type: Belt-drive manual turntable
  • Motor: DC servo
  • Drive method: Belt drive
  • Speed: 33-1/3 RPM, 45 RPM
  • Turntable platter: Die-cast aluminum
  • Wow and flutter: < 0.15% WRMS (33 RPM) at 3kHz
  • Signal-to-noise ratio: > 60dB
Output Level
  • Preamp “PHONO”: 4mV nominal at 1kHz, 5 cm/sec
  • Preamp “LINE”: 200mV nominal at 1kHz, 5 cm/sec
  • Phono preamp gain: 35dB nominal, RIAA equalized
Accessories Included
  • Dust cover
  • Platter
  • Turntable mat
  • Drive belt
  • Counterweight
  • AT-HS4 headshell
  • AT-VM95C stereo cartridge
  • 45-RPM adapter
  • RCA audio cable (approx. 1.0 m (3.3'))
  • AC adapter (approx. 4.9') (AD-SA1205WE)
  • Dust cover hinges
Other
  • Tonearm type: Static balanced straight aluminum pipe tonearm
  • Effective arm length: 223.6 mm
  • Overhang: 18.6 mm
  • Tracking error angle: < 2 degrees
  • Applicable cartridge weight: 12–17 g
  • Stylus pressure adjustment range: 0–3 g
  • AC adapter: 12V, 0.5A
  • Replacement stylus: AT-VMN95C
  • Power supply requirements: 100–240VAC, 50/60Hz, 0.5A max.
  • Dimensions (WxDxH): 16.53" x 13.38" x 4.6"
  • Weight: 8.60 lb. without dust cover

collapse expand iconWarranty

One year parts and labor warranty.

Featured Articles