AKG

collapse expand iconDescription

The P820 Tube high-performance multi-pattern tube microphone is an excellent tool for highlighting lead vocals, brass instruments, electric guitars and drums. With its dual one-inch diaphragm capsule and the advanced ECC83 dual-triode circuitry, the P820 Tube delivers real tube sound and raises the bar in its class of affordable tube microphones. Power supply included.

AKG P820 Project Studio Tube Microphone
AKG P820 Project Studio Tube Microphone
AKG P820 Project Studio Tube Microphone

collapse expand iconFeatures

Audio
  • Frequency response: 20Hz to 20kHz
  • Max SPL: 155 dB
Pattern and type
  • Capsule: Tube
  • Pattern: Multi-pattern
  • Type: Mounted
  • Applications: Studio, stage, theatrical
  • Phantom power required: No
Size and weight
  • Width: 2"
  • Height: 4"
  • Depth: 2"
  • Weight: 1.4 lb.
Included accessories
  • Case: Metal
  • Clip: Shockmount
  • Power supply: Yes
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

General
  • Audio Frequency bandwidth: 20 to 20000 Hz
  • Sensitivity: 20 mV/Pa
  • Equivalent Noise Level: : 16 dB-A
  • Signal to Noise: 78 dB-A
  • Preattenuation Pad: -20 dB
  • Bass Cut Filter: 80 - 12 dB/octave (selectable on remote control unit) Hz
  • Electrical Impedance: <= 200 Ohms
  • Recommended Load Impedance: >= 1000 Ohms
  • Polar Patterns: Cardiod, Omnidirectional, Figure of eight
Audio Output
  • Type: Balanced XLR
  • Gender: Male
  • Contacts: 3-pin
Dimensions / Weight
  • Length: 212 mm
  • Diameter: 54 mm
  • Net Weight: 765 g
Power Supply
  • Primary Fuse: 125 mA / 250 V slow-blow
  • Powering: 210-240 VAC or 110-120 VAC (selectable)

collapse expand iconWarranty

AKG Acoustics, U.S. Limited Warranty

Amended July 19, 2005

AKG Acoustics warrants AKG products against defects in material or workmanship for a period of two years from the date of original purchase, and agrees to repair or, at our option replace any defective unit without charge for either parts or labor. AKG grants a three-year warranty covering selected products (C 12 VR, C 414 B-ULS, C 414 B-TLII, C 414 B-XLS, C 414 B-XLII, C 426 B, C 451 B, C 480 B, C 391 B, C 1000 B, C 2000 S, C 3000 B, C 4000 B, C 4500 B, SolidTube) against defects in material and workmanship.

Warranty is valid for AKG products purchased and delivered within the United States for the original purchaser only. The purchaser's Bill of Sale will serve as proof of sale and warranty validity in the U.S. Shipment of defective items to AKG for repair will be at the customer's own risk and expense. AKG will assume the return shipping cost for all items repaired under warranty.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or connecting the product to any receptacle other than specified.

This warranty is void unless AKG Acoustics, U.S.'s service center performs the repair. No responsibility is assumed for any special, incidental or consequential damages caused by the consumer. However, the limitation of any right or remedy shall not be effective where law prohibits such.

Featured Articles