Gallery
Description
Features
Specs
Reviews
Q&A

Videos (1)

View All
Radial JPC

Radial JPC

Radial Engineering

Description

The Radial JPC DI Box is a two-channel hybrid direct box designed to address the demand for interfacing computer sound cards, consumer electronics and other gear to professional sound systems. The JPC features two active 48V phantom powered channels in a compact, rugged enclosure. It combines an active drive circuit, for long cable runs, with transformer isolated inputs to eliminate hum and buzz caused by ground loops. Multiple input and thru connectors for great versatility include 1/8" stereo, 1/4" stereo and RCA.
Open Box Radial Engineering JPC Stereo PC DI Box Level 1
Open Box Radial Engineering JPC Stereo PC DI Box Level 1
Open Box Radial Engineering JPC Stereo PC DI Box Level 1

Features

  • Isolated XLR connectors to eliminate chassis ground potential
  • Active balanced circuit drives long cable runs without signal loss.
  • Audio Transformers on both inputs provide 100% isolation to eliminate hum and noise causing ground loops.
  • 14-Gauge steel welded I-beam construction makes it impossible to torque the PC board
  • High grade switches - long life, high cycle for reliable performance
  • Military spec PC board with full surface ground plane to reduce RF noise susceptibility.

Specs

  • Input and Output Panels
  • -10dB pad reduces the level going into the JPC from loud sources that could overload the circuit and cause distortion.48V Power on LEDs lets you know that phantom has been turned on and is powering the two channels. 1/4" connectors for each channel in parallel with RCA and 1/8" connectors
  • 1/8" TRS (stereo) connector designed for PCs and laptops, makes connection easy with standard 1/8" to 1/8" cable
  • Twin RCA connectors are great for connecting DVD/CD players and video machines. RCA thru-puts for flexibility.
  • Book-end design creates a protective zone around the switches & connectors - Indestructable 14-gauge steel construction.
  • Ground Lift switch - recessed to prevent accidental operation. Disconnects the ground path to the transformer at the XLR output. This is used when a ground path is made at the input side such as with a computer or rack module.
  • Full no-slip rubber bottom pad provides mechanical isolation, electrical insulation and 'stay-put-ability!'
  • Twin balanced XLR male output connectors; AES standard with Pin-1 ground and Pin-2 hot.

Featured Articles

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.