Gallery
Description
Features
Reviews
Q&A

Description

This genuine Fender Jazz Bass guitar maple neck features a comfortable "modern C" profile and 9.5"-radius rosewood or maple fingerboard with 20 medium jumbo frets. Also includes standard truss rod and pre-slotted synthetic bone nut. Tinted satin urethane finish on back for smooth feel, with gloss finish on maple fingerboard and headstock face. Crafted at Fender's Ensenada, Mexico, manufacturing facility.
Fender Jazz Bass Neck, 20 Medium Jumbo Frets Maple

Features

  • Fingerboard: Rosewood or Maple
  • Number of Frets: 20
  • Fret Size: Medium Jumbo
  • Neck Shape: Modern "C"
  • Neck Material: Maple
  • Neck Finish: Satin Urethane on Back of Neck, Gloss on Face of Headstock
  • Fingerboard Radius: 9.5" (241mm)
  • Scale Length: 34" (864mm)
  • Nut Material: Synthetic Bone (Melamine)
  • Nut Width: 1.50" (38.1mm)
  • Position Inlays: White Dot
  • 3/16" Truss Rod Adjustment Nut (at Headstock)
  • 4 Pre-Drilled Tuning Machine Holes- Vintage-Style Mount
  • Each neck is serialized and stamped during quality inspection
  • Fender Logo Decal

  • Dimensions:
  • Peg Hole Diameter - .734" (18.64mm)
  • Headstock Thickness - .540" (13.71mm)
  • Thickness at the 1st Fret - .800" (20.32mm)
  • Thickness at the 12th Fret - .900" (22.86mm)
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Reviews

4.8

5 Reviews

100%

of respondents would recommend this to a friend

Pretty nice, good fit,need a bit of tweeking for tune keys
I would buy this again
I would buy this again
Filters
Best Uses
  1. Mods1
Cons
  1. Bushings that come with Fender tuners don't fit1
Describe Yourself
  1. Experienced2
Pros
  1. Good Quality2
  2. Easy To Use1
  3. Functional1
  4. Improves Sound1
  5. Beautiful headstock1

Reviewed by 5 customers

  • Pretty nice, good fit,need a bit of tweeking for tune keys

    5

    submitted4 years ago

    byBad Mac

    fromChandler az

    I got this to replace a neck on a MIM precision bass, yes i prefer the jazz bass necks and a precision bass body. bolted right on without any issue. neck pocket was tiight, bolt pattern was perfect. the only issue i had was when installing the tunning machines, the pre-drilled holes were ever so slightly off. i had to drill a couple out a bit to get the tuning machines installed. the nut does need cut, so i took it to my luthier guy. so far i am thrilled with the neck. was priced right and fit great.

  • I would buy this again

    5

    submitted6 years ago

    byBill the Alien

    fromLas Vegas, NV USA

    I disliked the Pau Ferro fingerboard that was stock with my MIM Fender Player Series Jazz so I bought the maple fingerboard. Installation wasn't too bad, did it myself. Instructions were included and they are helpful. This neck fits MIM Player Series Fender Jazz Bass as well as Squier's so they CAN be upgraded with this best I recall. If you use the right tool, and push outward on them after removing the machine tuners, the bushings will pop out of the neck you're replacing BUT if you're like me and want to leave the neck intact for other uses you have to buy the bushings by Fender separately for this neck. [Sorry if my writing is a little choppy right now.] To summarize: Great neck. Very beautiful and FINALLY THIS WILL NOT FIT ON JAZZ BASSES MADE IN THE USA.

  • Recommended

    5

    submitted7 years ago

    byRobin

    fromUndisclosed

    Replaced my mexican jazz bass neck with this one, what a difference!!!, feels great and easy to play

  • Great Product

    5

    Verified Buyer

    submitted8 years ago

    byFrank

    fromundisclosed

    Great Fender replacement neck that's actually maple capped! I was surprised to see that! Easy to install if you know what you're doing.

  • Great neck. Good bargain

    4

    Verified Buyer

    submitted8 years ago

    byMario

    fromundisclosed

    I used this neck to replace the old one on my DIY jazz bass. An endless improvement, I started it with medium/cheap quality components and gradually improved it. This is one big and important step to the final result.

  • Previous
  • 1
  • Next

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted4 years ago

    asked byChris

    fromLake City Fl

    What size are the tuning key holes?

    Open Reply - Thomas
    "Peg Hole Diameter - .734" (18.64mm)"

  • submitted4 years ago

    asked byPimpleff

    fromToledo, Ohio

    Will this neck fit a 1990 Fender Jazz Plus bass ?

    Open Reply - Beau
    This neck would not be compatible with a 1990 Fender Jazz Plus bass.

  • submitted4 years ago

    asked byRich

    fromSaint Albans WV

    Will this neck fit a squier affinity pj bass body?

    Open Reply - Thomas
    Yes

  • submitted5 years ago

    asked byMark

    fromundisclosed

    Can this 'Fender Jazz Bass Neck, 20 Medium Jumbo Frets Maple', be fitted to a Squier Jazz Bass guitar? Thank you.

    Open Reply - Thomas
    Yes

  • submitted6 years ago

    asked byDavid

    fromWASHINGTON

    Would I be able to order a left handed version of this bass neck?

    Open Reply - Beau
    Unfortunately, a left handed version of this bass neck is not available at this time.

  • submitted7 years ago

    asked byRicardo

    fromNC

    Will this for my fender Japanese photo flame jazz bass?

    Open Reply - Ronald
    Yes it will.

  • submitted7 years ago

    asked byJeff

    fromSan Francisco, CA

    Are the screw holes for the tuning key brackets (4 holes per tuning key) pre-drilled on the back of the headstock?

    Open Reply - Ronald
    No. Since tuning keys are notorious to vary from slightly to excessively where the brackets go. A lot of times they don't even have one. So it makes it a bit more adaptable to more styles of tuning keys to not have the bracket hole pre-drilled.

  • submitted7 years ago

    asked byZachary

    fromSC

    the description says white dot inlay, the picture shows black dot inlay. which one is it?

    Open Reply - Beau
    Sorry for the confusion. The inlays are actually black dot.

  • submitted7 years ago

    asked bySteve

    fromTennessee

    Are the mounting screw holes predrilled? My '75 has the 3 screw mounting with microtilt.

    Open Reply - Ronald
    No. The mounting holes aren't pre-drilled to ensure that the tuning machines can be used with the neck a lot easier.

  • submitted7 years ago

    asked byMike

    fromPA

    Are the holes to secure tuning machines and string nut pre drilled?

    Open Reply - Kenneth
    Yes, they are pre drilled holes on the head
  • Previous
  • 1
  • 2
  • Next