Empirical Labs FATSO EL7X Full Analog Tape Simulator and Optimizer

The Empirical Labs FATSO (Full Analog Tape Simulator and Optimizer) is a digitally controlled analog device that gives musicians and engineers easy access to many of the desirable characteristics exhibited by older tube and Class-A electronics and magnetic tape mediums. This two-channel audio processor musically integrates frequencies and transients, increasing the apparent volume while keeping tight control over peak levels.

With the FATSO, recording studios and audio production facilities can enhance and soften the sound of Hardware Digital Recorders (HDRs) and Digital Audio Workstations (DAWs). Mix engineers will have the option not to have to use bulky, expensive analog tape recorders to get the warmth and sweet high end they’ve come to rely on for so many decades. Owners of DAWs and HDRs can finally put a stop to complaints about the coldness and brittle edge of their mixes and instruments. Even audiophiles can benefit from the FATSO, bringing back the warmth and ambience of LP’s and tapes to their CD players and other digital reproduction mediums.

ELEVEN is a new compressor for the FATSO, replacing the old GP Ratio, and emulates the famous UREI 1176LN in 20:1, with the slowest attack and fastest release. This 1176 setting has been used on countless hit records through the decades. With the slower “1176” attack, the transients keep the dynamics present, while the high ratio, can radically limit the dynamic range of any source, making it present and sitting in a nice little place in your mix. One can slam it, or just touch it with a few dB of compression.

Unlike the older units, the FATSO is uniform and predictable from one unit to the next. Precise factory calibration assures that if you go from one FATSO to the next, these settings will all sound the same. The only big variable is the input and output pots, which is why we use high resolution knobs, for recall.

The FATSO Jr was redesigned to lower power consumption and heat, as well as make the interface operate more like it was originally envisioned. The controls can now step backwards one setting by holding the associated button for less than a second. This enables the Bypass to be accessed with one button press from any state, as well as compare compressor and WARMTH settings more easily.