Gallery
Description
Features
Specs
Reviews
Q&A
Behringer

Description

The Behringer EUROPOWER PMP6000 powered mixer packs a punch. The PMP6000 gives you 20 input channels, including 12 XLR mic preamps with switchable phantom power, making it easy to connect any type of microphone. The FBQ feedback detection system takes the guesswork out of eliminating feedback by visually pinpointing problem frequencies. A stereo 7-band graphic EQ provides precise tonal shaping, while dual monitor sends let you create custom mixes.

Powerful Yet Efficient Class-D Amplification

The EUROPOWER PMP6000's Class-D amplifier technology delivers a hefty 1,600W of power while generating less heat than traditional amps. You get 800W per channel in stereo mode or 1,600W bridged in mono mode. This high-power output ensures clear, full sound for any type of live performance or recording application. Since, Class-D amps are lighter and more efficient, you get portability without sacrificing an ounce of performance.

20 Input Channels With 12 XLR Mic Preamps

With 20 input channels, the EUROPOWER PMP6000 provides tremendous flexibility for any mixing scenario. It gives you 12 XLR mic inputs with switchable phantom power so you can use either dynamic or condenser mics. The 3-band EQ on the mono channels lets you fine-tune your tone. There are also eight stereo line channels that can each be used as two mono inputs if needed. You'll never run out of inputs with the EUROPOWER PMP6000.

Dual FX Processors and FBQ Feedback Detection

The EUROPOWER PMP6000 comes with dual 24-bit FX processors that provide 100 different effects like reverb, delay, chorus and more. Use them to dial in just the right amount of ambience for vocals and instruments. The FBQ feedback detection system takes the frustration out of eliminating feedback by showing you the exact frequencies that are problematic so you can notch them out. This makes it easy to optimize your sound at any venue.

Ideal for Live Sound Reinforcement and Recording

With its robust input options, built-in effects, graphic EQ and ample power, the Behringer EUROPOWER PMP6000 mixer is perfect for live performances, recording, houses of worship and installed sound. Its Class-D design provides concert-level output while being easy to carry and set up. The EUROPOWER PMP6000 gives you the tools you need to deliver professional sound anywhere.

Open Box Behringer EUROPOWER PMP6000 20-Channel 1,600W Powered Mixer Level 2 197881455408
Open Box Behringer EUROPOWER PMP6000 20-Channel 1,600W Powered Mixer Level 2 197881455408
Open Box Behringer EUROPOWER PMP6000 20-Channel 1,600W Powered Mixer Level 2 197881455408

Features

  • Ultracompact 2 x 800W stereo powered mixer (1,600W bridged mode)
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-lightweight
  • Ultracompact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead weight
  • 20-channel mixer section features 12 mono and four stereo channels plus separate CD/Tape input/output
  • Two studio-grade, 24-bit stereo FX processors with 100 presets, including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
  • 12 high-quality XENYX Mic Preamps with switchable +48V phantom power for condenser microphones
  • Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
  • Stereo 7-band graphic EQ allows precise frequency correction of monitor and main outputs
  • Voice Canceller function removes singer's voice from recordings for karaoke applications
  • Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
  • Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
  • Standby switch mutes all input channels during breaks while background music is provided via CD/Tape input
  • Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
  • Adjustable stereo 2-Track input for connecting external line sources
  • Multi-functional stereo preamp outputs for added flexibility
  • Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

Specs

Microphone Inputs
  • Type: XLR, electronically balanced input circuit
  • Mic E.I.N. (20Hz-20kHz): @ 0 ohm source resistance: -134dB/136dB A-weighted, @ 50 ohm source resistance: -131.5dB/134dB A-weighted, @ 150 ohm source resistance: -129dB/155dB A-weighted
  • Frequency response: < 10Hz-200kHz (-1dB), < 10Hz - > 200kHz (-3dB)
  • Gain: +10dB, +60dB
  • Max. input level: +12dBu @ +10dB gain
  • Impedance approx.: 2.6 kohm balanced / 1.3 kohm unbalanced
  • Signal-to-noise ratio: 109dB/112dB A-weighted (0dBu In @ +10dB gain)
  • Noise (THD + N): 0.002%/0.00018% A-weighted
Mono Line Inputs
  • Type: 1/4" TS connectors, balanced
  • Impedance: approx. 20 kohm
  • Max. input level: +21dBu
Stereo Line Inputs
  • Type: 1/4" TRS connectors, unbalanced
  • Impedance: > 3.6 kohm
  • Max. input level: +22dBu
Equalizer
  • Low: 80Hz/±15dB
  • Mid: 100Hz-8kHz/±15dB
  • High: 12kHz/±15dB
2-Track Input
  • Type: RCA
  • Impedance approx.: 3.6 kohm
Preamp Outputs
  • MAIN:
  • Type: 1/4" TS connectors, unbalanced
  • Impedance: approx. 150 ohm, unbalanced
  • Max. output level: +21dBu
Monitor
  • Type: 1/4" TS connectors, unbalanced
  • Impedance: approx. 150 ohm, unbalanced
  • Max. output level: +21dBu
Stereo Outputs
  • Type: 1/4" TRS connectors, unbalanced
  • Impedance: approx. 150 ohm, unbalanced
  • Max. input level: +21dBu
  • Type: RCA
  • Impedance: approx. 1 kohm
  • Max. input level: +21dBu
Loudspeaker Outputs
  • Type: Professional locking connector
  • Load impedance:
  • MAIN L/R: 4–8 ohm
  • MONITOR/MAIN MONO: 4–8 ohm
  • MAIN MONO/MAIN MONO: 4–8 ohm
  • BRIDGE: 8–16 ohm
DSP
  • Converter: 24-bit Delta-Sigma, 64/128-times oversampling
  • Dynamic:s D/A 90dB
  • Sampling rate: 46.875kHz
  • Delay Time: max. 5 secs
  • Signal run time (Line In > Line Out): approx. 1.5ms
Display
  • Type: 2 x 2-digit, 7-segment LED
  • Output Power
  • RMS @ 1% THD, both channels driven:
  • 8 ohm per channel: 300W
  • 4 ohm per channel: 600W
  • RMS @ 1% THD, bridged mode: 8 ohm 1200W
  • Peak Power, both channels driven:
  • 8 ohm per channel: 400W
  • 4 ohm per channel: 800W
  • Peak Power, bridged mode: 8 ohm 1600W
Power SupplyMains voltage
  • USA/Canada: 120V, 60Hz
  • Fuse 100: -120V T 10 A H 250V
  • Fuse 220: -240V T 6.3 A H 250V
Power Consumption
  • Power consumption: 1050W
  • Mains connector: IEC standard receptacle
Dimensions/Weight
  • Dimensions (WxHxD): 23-1/2" x 4-7/8" x 19-1/2", 596 mm x 122 mm x 496 mm
  • Weight: 10.4 kg/22.9 lb.

Featured Articles

Reviews

3.87

15 Reviews

40%

of respondents would recommend this to a friend

Most Liked Positive Review

5

Very Good!

I had the previous model PMP5000 and like the layout of the mixer, but something was going wrong with the amp so I purchased the PMP6000 which had the same layout. I've only use this mixer once so far for DJ'ing and let me tell you this mixer does a great job. Very easy to use and I get no "hiss" like I did with the earlier model.

VS

Most Liked Negative Review

1

no available parts or repair facilities if mixer goes bad.

only performed at 2 places and mixer went bad. gave it for repairs but was returned with the comment that the parts are no longer available from behringer. waste of money. will never recommend this to any one.

Filters
Best Uses
  1. Amateur Recording2
  2. Outdoor Events / Games2
  3. Performances2
  4. Music Videos1
  5. Professional Recording1
Cons
  1. Not Durable2
  2. Difficult To Use1
  3. Poor Quality Sound1
Describe Yourself
  1. Experienced3
  2. Professional Musician2
Pros
  1. Compact2
  2. Easy To Use2
  3. Excellent Sound2
  4. Simple Controls2
  5. Versatile2

Reviewed by 15 customers

  • That's not a sale that's the actual price 😐

    3

    submitted4 years ago

    byVent

    fromHouston TX

    That's not a sale. That's the actual price.

  • Low Quality

    1

    submitted6 years ago

    byBobby

    fromNashville, TN

    I bought one of these and used it for about a year in rehearsal didn't get moved around much. Then I put it in storage and when I took it out 4 years later it worked but it started malfunctioning very quickly. I can't imagine if I used it live and moved around with it from show to show it wouldn't last long at all

  • Way too frequency sensitive for karaoke

    2

    submitted6 years ago

    byStratocaster64

    fromHouston, TX

    This unit is too frequency sensitive when using it for Karaoke. Since most songs are not recorded equal, you have to constantly adjust highs, mids, lows, and frequency to ensure all instruments come through accurately. And tweaking the knobs takes understanding frequency. Also, I bought a package deal with the 12" speakers. There is not enough bass in the package without mudding up the mix. I had to add a subwoofer to get good sound. There are better boards out there.

  • Happy I found this board!

    5

    Verified Buyer

    submitted7 years ago

    byCOLLEEN

    fromUndisclosed

    Just what I was looking for to give us more channels to work with on a solid board. There are definitely more bells and whistles on other boards, especially digital ones, but I needed something that was intuitive to use (since I had been using a Behringer already) and gave us more of what we needed in terms of channels and support.

  • AWESOME!!!

    5

    Verified Buyer

    submitted7 years ago

    byCHY

    fromSan Benito Tx.

    Awesome product you won't be dissapointed buy it and enjoy it.

  • EUROPOWER PMP6000 20-Channel Powered Mixer

    5

    Verified Buyer

    submitted8 years ago

    byBEIT

    fromundisclosed

    perfect for us

  • Previous
  • 1
  • 2
  • 3
  • Next

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitteda year ago

    asked byRob

    fromWichita, ks

    Can I add an external amp to this?

    Open Reply - Gear-Support
    Yes, you can add an external power amplifier to the Behringer EUROPOWER PMP6000, even though it's a powered mixer. The PMP6000 has "MAIN OUT" (XLR) and "MONITOR OUT" (1/4" TRS) outputs, which are line-level signals. These outputs bypass the internal amplifier and are designed for: Sending to an external power amp (like if you want to drive larger passive speakers). Sending to active (powered) speakers. Feeding a recording device, monitor system, or another mixer.