Tone King Royce Tube Preamp Pedal - Red
Pay in 4 interest-free payments of $150.00

Description
The Tone King Royce tube preamp pedal captures the shimmering chime, rich harmonics and touch-sensitive response of classic British AC amplifiers, bringing one of guitar history's most celebrated sounds into a sophisticated, pedalboard-ready format. Built around three high-voltage 12AX7 tubes and Tone King's innovative Zero-Watt Power Amp technology, the Royce recreates the dynamic interaction and natural compression of a vintage tube amplifier with remarkable depth and authenticity. Two independent channels offer selectable Normal and Top Boost voicings, complemented by individual IRONMAN attenuation controls for precise tonal shaping. Lush stereo reverb and tremolo, onboard OwnHammer cabinet IRs and power amp simulation extend the experience beyond traditional amplification, while balanced stereo outputs, MIDI connectivity and flexible effects routing make the Royce equally capable onstage, in the studio or integrated with an existing rig. Combining genuine tube circuitry with modern digital flexibility, the Tone King Royce delivers the expressive character of legendary British amplification in a remarkably versatile preamp pedal.
High-Voltage Tri-Tube Circuit Delivers Authentic Amplifier Response
At the heart of the Royce are three 12AX7 tubes operating at high voltage, providing the harmonic complexity and touch sensitivity associated with classic British tube amplifiers. Tone King's Zero-Watt Power Amp incorporates a genuine tube-driven phase inverter stage, recreating the dynamic interaction between preamp and power section without the need for a conventional speaker-driving output stage. This approach produces the natural compression, harmonic bloom and responsive feel of a tube amplifier pushed into its sweet spot, allowing notes to develop richness and sustain as playing intensity increases. Dig into the strings for expressive breakup, ease back for shimmering cleans or adjust your guitar's volume to move naturally between the two. The result is a deeply interactive playing experience that preserves the expressive connection between guitarist and amplifier.
Dual Normal and Top Boost Channels Offer Classic British Versatility
The Royce features two independent channels, each equipped with selectable Normal and Top Boost modes for exploring distinct sides of the classic British AC sound. Normal mode delivers full-bodied cleans with warm highs, substantial low-end presence and rich harmonic depth, while Top Boost adds gain, brilliance and articulation for everything from sparkling edge-of-breakup tones to singing overdrive. Each channel provides dedicated Volume, Treble, Middle, Bass and Cut controls, along with a Normal/Top Boost switch for additional tonal flexibility. Individual IRONMAN attenuation controls allow players to manage each channel's output and response, making it easy to balance contrasting sounds without sacrificing the character of the tube circuitry. Whether configured for complementary clean and driven tones or two variations of the same classic voice, the Royce offers the flexibility of a sophisticated dual-channel amplifier in a compact preamp format.
Stereo Effects and OwnHammer IRs Create a Complete Amplifier Experience
The Royce combines its genuine tube preamp with stereo effects and sophisticated cabinet simulation to deliver a complete, expressive amplifier sound for direct performance and recording. Built-in spring-style convolution reverb features dedicated Level and Dwell controls for shaping everything from subtle ambience to spacious, vintage-inspired depth, while stereo tremolo provides adjustable Depth and Speed for classic pulsing textures. A low-latency IR engine offers three selectable cabinet responses per channel, with 20 included OwnHammer IRs and the ability to load additional responses through the SYNERGY Editor software. Power amp simulation further shapes the direct signal, with adjustable filtering and high-frequency compensation for tailoring the response to different monitoring systems. Together, these features capture the dimensional character of classic British amplification while providing the flexibility of modern stereo processing.
Flexible Routing and MIDI Control Support Modern Rigs
Designed to integrate into a wide range of professional setups, the Royce offers extensive connectivity for stage, studio and pedalboard applications. Dual balanced XLR outputs provide stereo direct connection to PA systems, recording interfaces and powered monitors, while a dedicated headphone output supports private practice with the full preamp, effects and cabinet simulation signal. A stereo series effects loop accommodates external modulation, delay and other processors, while dedicated bypass routing allows the Royce to add two tube channels to a compatible amplifier or integrate with other preamps. MIDI connectivity provides access to up to 128 recallable presets, including channel selection, IR assignments and effects routing. Through its USB-C connection, the SYNERGY Editor software enables detailed customization of cabinet responses, power amp simulation parameters and system settings, giving players extensive control over their sound without sacrificing the immediacy of the pedal's physical controls.
Legendary British Chime Meets Modern Tone King Innovation
From the shimmering clean tones of the British Invasion to the harmonically rich overdrive that helped define generations of rock guitar, classic AC amplifiers have remained a touchstone for expressive, dynamic tone. The Tone King Royce honors that legacy with genuine high-voltage tube circuitry and a sophisticated Zero-Watt Power Amp design, preserving the natural compression, harmonic complexity and responsive feel that make those vintage amplifiers so compelling. Its independent Normal and Top Boost channels provide a broad tonal foundation, while stereo effects, cabinet IRs and extensive routing options bring that character into contemporary performance environments. Whether serving as the centerpiece of a direct rig or expanding the capabilities of an existing amplifier, the Tone King Royce Tube Preamp Pedal delivers the unmistakable spirit of vintage British amplification with the precision, flexibility and expressive control of a modern tube preamp.



Features
- High-voltage tri-tube preamp delivers classic British AC chime with flexible routing
- Three 12AX7 tubes provide rich harmonics, dynamic response and tube-driven character
- Dual channels offer Normal and Top Boost modes for clean and overdriven tones
- Normal mode delivers full-bodied cleans while Top Boost adds gain and harmonic complexity
- Zero-Watt Power Amp recreates phase inverter response for natural compression and feel
- Dual IRONMAN attenuators provide independent attenuation for each channel
- Stereo spring reverb and tremolo offer vintage effects with independent channel assignment
- Three IR slots per channel provide cabinet simulation with 20 included OwnHammer IRs
- Stereo series effects loop integrates external modulation, delay and reverb pedals
- Dual balanced XLR outputs with ground lift support direct connections to mixers and PA systems
- USB-C and SYNERGY Editor enable IR management, sound editing and routing customization
- MIDI support provides recall of up to 128 presets for flexible live performance control
Specs
- Product type: Tube preamp pedal
- Model: Royce
- Channels: 2
- Channel modes: Normal, Top Boost
- Power amp technology: Zero-Watt Power Amp
- Attenuation: Dual IRONMAN attenuators
- Reverb: Stereo spring convolution reverb
- Tremolo: Stereo
- Cabinet simulation: Impulse response (IR)
- Included IRs: 20 OwnHammer IRs
- IR slots: 6 (3 per channel)
- MIDI presets: 128
- Preamp tubes: 3 x 12AX7
- Channel 1: Attenuation, Cut, Treble, Middle, Bass, Volume, Normal/Top Boost switch
- Channel 2: Attenuation, Cut, Treble, Middle, Bass, Volume, Normal/Top Boost switch
- Reverb: Level, Dwell
- Tremolo: Depth, Speed
- IR selection: 3-position switch per channel
- Footswitches: Reverb/Tremolo, Channel/Loop Bypass, Bypass/IR Bypass
- Ground lift: Yes
- Instrument input: 1 x 1/4"
- Effects loop send: 1 x 1/4"
- Effects loop return: 2 x 1/4" (stereo)
- Bypass send: 1 x 1/4"
- Bypass return: 1 x 1/4"
- Main output: 1 x 1/4"
- Balanced outputs: 2 x XLR (stereo)
- Headphone output: 1 x 1/4"
- MIDI input: 1 x 5-pin DIN
- USB: USB-C (SYNERGY Editor)
- Power requirements: 12V DC
- Width: 7.2"
- Depth: 5.7"
- Height: 2.75"
- Weight: 1.9 lb.
- Power supply: Universal 12V DC
- USB cable: 6'
Featured Articles
Reviews
Be the first to review the Product

.jpeg)















