StudioMonitorsMixing
Tannoy Reveal 6 Passive Studio Reference Monitors
$399.99
Need Help?

Description
The 1" titanium WideBand high-frequency unit is seamlessly matched to a 6.5" long throw, low distortion bass unit by a precision low-loss crossover network. Distortion has been reduced by introducing flux control rings and copper caps into the magnet system to make the voice coil inductance linear as it moves in and out of the magnetic air gap--otherwise a source of nasty third harmonic distortion. WideBand technology extends the high frequency response to 35kHz and beyond--although frequencies higher than 20kHz are inaudible in all but a few human beings--to correct the phase response within the audible band up to 20kHz. Both drive units are mounted on a massive 40mm thick baffle, curved to minimize diffraction and creating the loudspeaker's distinctive styling. The drive units are magnetically shielded to reduce stray magnetic fields and allow the system to be used close to video monitors.


Features
- From the front:
- 40mm MDF sculpted baffle--stiff, heavy and rigid and minimizes diffraction
- Recessed drive units flush with the baffle surface--minimizes diffraction
- Tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image
- Smooth tweeter faceplate contours prevent diffraction and cavity effects
- 10 point fixing maximizes contact between drive unit and baffle
- New design bass units have aluminum flux control rings around the voice coils and copper caps on the pole pieces ” makes linear the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance
- Bass unit development using Klippell analysis equipment to minimize offsets and make linear the suspension components
- From the side:
- 18mm MDF cabinet construction provides stiffness and minimizes coloration
- Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange
- Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted
- From the rear:
- Simple foolproof gold-plated terminal panel. No degradation due to bi-wire links in the HF signal path
- OmniMount friendly fixing points for wall mounting
Specs
- Frequency response: 63Hz to 51kHz
- Recommended amplifier power: 50 to 100W @ 8 ohm
- Power handling average RMS: 50W
- Power handling program RMS: 100W
- Nominal impedance: 6 ohm
- Sensitivity: 90dB for 1W at 1m
- Distortion: <0.6%
Crossover frequency: 2.9kHz - Dispersion: (@-6dB) 90 degrees
- LF/mid: 165mm (6") multi fibre paper pulp cone
- WideBand HF: 25mm (1") titanium dome, neodymium magnet system.
- Shielded: Yes
- Cabinet:
- Type: optimized bass-reflex loaded
- Construction: MDF cabinet and front baffle, tongue and groove front and back
- Finish: grey cabinet, maroon painted baffle
- Shipping dimensions: 24-1/2"H x 11-1/4"W x 17-1/2"D (622 x 287 x 440mm)
- Shipping weight: 35.3 lbs. (16kg)
Reviews
Be the first to review the Product
Q&A
Have a question about this product? Our expert Gear Advisers have the answers.
No results but…
You can be the first to ask a new question.
It may be Answered within 48 hours.

.jpeg)



