Silktone Overdrive+ Overdrive and Boost Pedal - Gray
Pay in 4 interest-free payments of $67.25
Description
The Silktone Overdrive+ overdrive and boost pedal moves from subtle always-on enhancement to rhythm drive and saturated lead gain through an original circuit built around JFETs, op-amps and diode clipping. Handbuilt in California, it uses an op-amp for gain and buffering that operates internally at approximately 30V, providing enough headroom to remain clean even when another pedal is stacked in front. Volume, Tone and Gain controls shape the main overdrive, while selectable symmetric and asymmetric clipping modes and a bass-cut switch provide additional control over its response. A separate Strangle/Raw dirty boost adds another gain stage with either resonant filtering or a full-range response, giving guitarists multiple ways to shape and stack gain from a single pedal.
Original Circuit Covers a Broad Gain Range
At lower Gain settings, the Overdrive+ can operate as an always-on tonal enhancer before moving into increasingly assertive overdrive and high-gain lead sounds as the control is raised. Its op-amp stage handles gain and buffering at approximately 30V internally, preventing the op-amp itself from clipping even when another pedal is stacked in front. Instead, the audible clipping comes from the circuit’s JFETs and diodes. This arrangement gives the pedal substantial internal headroom while allowing its dedicated clipping stages to determine the character of the drive.
Clipping Modes and Bass Cut Refine Response
A dedicated clipping switch changes the character of the main overdrive between symmetric and asymmetric styles. Symmetric clipping provides the smoother response of the two settings, while asymmetric clipping delivers a more natural and textured character. The separate bass-cut switch trims low frequencies to tighten the response before they contribute excess weight to the driven sound. Together with the standard Volume, Tone and Gain controls, these options let players refine both the texture and frequency balance of the Overdrive+ without complicating its basic three-knob workflow.
Strangle and Raw Add a Second Gain Voice
The independent Strangle/Raw section expands the Overdrive+ beyond its primary drive circuit with a colorful dirty boost that adds gain and strong second-harmonic content. Strangle mode engages a resonant filter for a subtle cocked-wah-like character, while Raw removes that filter to create a full-range boost. The boost can provide another distinct gain texture or push the main overdrive circuit harder for more saturation. For guitarists who want an original overdrive circuit with selectable clipping, flexible tone shaping and an additional boost voice, the Silktone Overdrive+ pedal packs a broad range of gain options into one pedalboard position.



Features
- Overdrive and boost pedal with JFET clipping, dual clipping modes and Strangle/Raw boost
- Original circuit ranges from always-on enhancement to high-gain drive
- High-voltage op-amp stage supports clean gain, buffering and pedal stacking
- Symmetric and asymmetric clipping provide smooth or textured response
- Bass-cut switch tightens low frequencies before the output stage
- Strangle mode adds a resonant filtered boost with cocked-wah character
- Raw mode delivers a fuller-range dirty boost
Specs
- Product type: Overdrive and boost effects pedal
- Model: Overdrive+
- Circuit type: JFET, op-amp and diode clipping
- Internal operating voltage: Approximately 30V
- Clipping modes: Symmetric, asymmetric
- Control knobs: Volume, Tone, Gain
- Switches: Bass cut, clipping mode
- Boost modes: Strangle, Raw
- Power requirement: 9VDC, center negative
- Maximum supply voltage: 9V
- Current draw: Approximately 30mA
- Country of origin: USA
Featured Articles
Reviews
Be the first to review the Product
Q&A
Have a question about this product? Our expert Gear Advisers have the answers.
No results but…
You can be the first to ask a new question.
It may be Answered within 48 hours.

.jpeg)





