Gallery
Description
Features
Specs
Reviews
Q&A
Crown

Description

Designed for touring and live-sound applications, the Crown CM-311AESH is a rugged head-worn microphone with unequaled performance. It sounds like the best handheld microphones ” full, clear, and distortion-free, even with the loudest singers.

The CM-311AESH is the latest version of Crown's proprietary Differoid technology. Its cardioid pickup pattern rejects sounds from the rear, such as floor monitors. Its noise-canceling ability rejects sounds at a distance, such as instruments on stage and crowd noise. This results in the CM-311AESH having outstanding gain-before-feedback and isolation.

Lightweight and comfortable, the mic's headband and boom adjust to fit any singer. An included pop filter greatly reduces breath noise and pops. Because of the boom's unique behind-the-ear design, it does not cover up the singer's face.

NOTE: Putting an XLR connector on the CM-311AESH and connecting to a mic input with phantom power WILL damage the mic element.
Restock Crown CM-311AESH Headset Wired for Shure

Features

  • Full, clear, distortion-free sound
  • Outstanding gain-before-feedback and isolation
  • Connects to most wireless transmitters

Specs

  • Transducer type: Electret condenser.
  • Frequency response (typical): 50 Hz to 17,000 Hz
  • Polar pattern: Cardioid
  • Impedance: 6 kilohms unbalanced.
  • Recommended load impedance: 10 kilohms
  • Open-circuit sensitivity, typical, close-talking: CM-311AE, 1.25 mV/Pa (”58 dB re 1V/Pa).
  • Power sensitivity, typical, close-talking: ”71.5 dB re 1 mW/Pa.
  • Equivalent noise level (self noise): 26 dB SPL typical (0 dB = 0.0002 dyne/cm2), A-weighted.
  • S/N ratio: 68 dB at 94 dB SPL.
  • Maximum SPL: 140 dB SPL with 3V DC, 148 dB
  • SPL with 9V DC.
  • Operating voltage: 3”9V DC from the transmitter's battery.
  • Polarity: Positive pressure on diaphragm produces positive voltage on shield with respect to white lead.
  • Current drain: 0.27 mA nominal.
  • Off-attenuation: 70 dB.
  • Output connectors: supply your own to match your transmitter.
  • Cable: In-line with this cable is a small circuit module that equalizes the microphone signal. Cable is 42-inches (106.68 cm) long from headband to module, 12-inches (30.48 cm) from module to cable end. 2-conductor shielded unbalanced cable, un-terminated.
  • Materials: High-impact plastic mic housing, brass boom, steel wire headband
  • Net weight: Head-worn mic, 2.1 oz (61 g)
  • Dimensions: Headband 5.5-in. (13.97 cm) diameter, adjustable. Boom approximately 7 in. (17.78 cm) x 3 in. (7.62 cm). See Figs. 3 and 4.
  • Included accessories: Microphone carrying case, WS-6 foam pop filter, clothing clip.

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.