NUX C-7 Wireless In-Ear Monitor System
Pay in 4 interest-free payments of $49.75

Description
Whether you're rehearsing with a band, performing on stage, streaming live or practicing quietly at home, dependable wireless monitoring gives you the freedom to move naturally while staying connected to every note. The NUX C-7 stereo wireless in-ear monitor system transforms virtually any wired in-ear monitors into a professional wireless monitoring solution, combining low-latency 5.8GHz transmission, intuitive controls and flexible multi-user operation in a compact, travel-ready package. With high-fidelity stereo sound, intelligent channel management and a convenient charging case that extends total runtime beyond 18 hours, the C-7 delivers the clarity, reliability and mobility modern performers demand.
Professional Stereo Monitoring With Reliable Wireless Performance
The C-7 transmits high-fidelity stereo audio over the 5.8GHz ISM frequency band, helping avoid the congestion commonly found on 2.4GHz wireless systems. With a transmission range of up to 98' and latency of just 7.5 ms, performers can monitor naturally without noticeable delay. Stereo and Mono operating modes adapt easily to headphone outputs, mixer sends and audio interfaces, while five built-in monitoring EQ presets help compensate for the occlusion effect commonly experienced with in-ear monitors, resulting in a clearer, more balanced listening experience.
Flexible Pairing for Solo Performers and Full Bands
Automatic pairing mode powers up and connects quickly while intelligently selecting the strongest available wireless channel. Manual mode adds support for up to 10 selectable channels and allows a single transmitter to connect with multiple receivers, making the system ideal for band rehearsals, live performances, interviews and streaming applications. A bright 0.87" display provides clear status information including battery life, channel selection, EQ settings and signal status, while one-touch frequency hopping makes it easy to move to a cleaner channel whenever needed.
Built for Portable Convenience
The included charging case stores and protects both the transmitter and receiver while providing enough capacity to recharge the system approximately two full times for more than 18 hours of total runtime. Individual operating time reaches approximately six hours per charge, and flexible mounting options—including a belt clip, magnetic attachment and lanyard—allow the receiver to adapt to virtually any performance setup. Complete with 1/8" and 1/4" stereo input compatibility, the NUX C-7 makes it easy to add dependable wireless freedom to existing in-ear monitors for the stage, studio or home.



Features
- Stereo wireless in-ear monitor system unlocks cable-free movement and true mix detail
- 5.8GHz transmission reduces interference for clear signal on busy stages
- Auto and manual pairing support one-to-many setups for band rehearsal or livestreaming
- One-touch frequency hopping quickly avoids dropouts during live changes
- High-resolution display gives instant feedback on channel and battery status
- Five built-in EQ presets counter occlusion effect for accurate monitoring
- Stereo and mono modes optimize routing for different mixers and setups
- 98' range and 7.5ms latency enable natural timing for live performance
- 3000mAh charging case delivers over 18 hours of total runtime
- Three mounting options adapt to different workflows and stage needs
Specs
- Product type: Stereo wireless in-ear monitoring system
- Model: C-7
- System configuration: One transmitter and one receiver
- Expandable: Supports additional C-7 receivers
- Frequency band: 5.8GHz ISM (5.725–5.85GHz)
-
Transmission power: <25mW EIRP
Operating range: Up to 98.4' - Latency: 7.5ms
- Pairing modes: Auto and Manual
- Manual channels: 10
- Receiver support: One transmitter to multiple receivers
- Frequency selection: Automatic channel selection and one-touch frequency hopping
- Operating modes: Stereo and Mono
- Dynamic range: 96dB
-
THD+N: <0.4% @ 1kHz
Monitoring EQ presets: 5 - Transmitter input impedance: 3.7 kohms
- Transmitter maximum input level: 2.7Vrms
- Recommended receiver headphone impedance: 16–32 Ohms
- Receiver maximum output power: 57mW RMS
- Transmitter input: 1/8" stereo
- 1/4" compatibility: Via included adapter
- Receiver output: 1/8" headphone
- Charging connection: USB-C
- Button lock: Automatic after 1 minute of inactivity
- Display information: Audio signal, battery level, pairing mode, channel and EQ setting
- Silent practice support: Guitar, amp modeler and audio interface connections
- Receiver mounting options: Clip, magnetic attachment and lanyard
- Display: 0.87" high-resolution display
- Transmitter battery: 3.7V, 750mAh
- Receiver battery: 3.7V, 500mAh
- Charging case battery: 3.7V, 3,000mAh
- Operating time: Approximately 6 hours
- Total battery life with charging case: More than 18 hours
- Charging time: Approximately 3 hours
- Charging case
- Magnetic patch
- USB-C charging cable
- Neck lanyard
- 1/4" adapter
- Transmitter dimensions: 3" × 1.7" × 1.2"
- Transmitter weight: 1.8 oz.
- Receiver dimensions: 2.3" × 1.5" × 1.3"
- Receiver weight: 1.4 oz.
Featured Articles
Reviews
Be the first to review the Product
Q&A
Have a question about this product? Our expert Gear Advisers have the answers.
No results but…
You can be the first to ask a new question.
It may be Answered within 48 hours.

.jpeg)























