collapse expand iconDescription

The Furman PL-Plus C Power Conditioner delivers superior power conditioning and extreme voltage protection for your audio equipment. Featuring Furman's exclusive Series Multi-Stage Protection (SMP) technology and Linear Filtering Technology (LiFT), the PL-Plus C provides comprehensive protection against power spikes and surges. The PL-Plus C's rugged, rack-mountable chassis houses nine rear-panel outlets—including two isolated outlet banks to reduce interference—as well as one front-panel outlet, for a total output of 15 amps.

Series Multi-Stage Protection Plus Defends Against Surges

Furman's SMP+ circuitry incorporates multiple stages of surge suppression to handle even the most extreme power fluctuations, protecting connected equipment without compromising performance. The PL-Plus C's SMP+ circuit reacts in less than a nanosecond to clamp surges at 188 VAC, absorbing up to 6,500 amps of surge current. This extreme voltage shutdown capability powers down the unit and all connected gear in the event of hazardous over or under-voltage conditions, preventing damage.

Linear Filtering Technology Delivers Clean Power

Furman's LiFT filters noise and interference from the AC power line, isolating your audio components from EMI and RFI pollution that can compromise sound quality. The PL-Plus C's linear filtering, with zero leakage to ground, delivers a clean sine wave and maintains the integrity of the audio signal for optimal performance from your gear.

Convenient, Versatile Design

Occupying a single rack space, the PL-Plus C features a rugged, all-steel chassis with convenient front-panel controls and monitoring. Its built-in, retractable LED rack lights provide illumination for rear connections, with an on/off/dimmer control, while the front-mounted outlet offers easy access. The PL-Plus C's rear-panel voltmeter displays incoming voltage to instantly check power quality. A heavy-duty, 10-foot power cable and 15-amp circuit breaker are also included.

Comprehensive Protection and Power for Your Rig

For premium power conditioning and surge protection for your guitar amps, PA systems, recording equipment and more, the Furman PL-Plus C Power Conditioner is an ideal solution. With SMP+, LiFT, and versatile, performance-ready design, the PL-Plus C delivers clean, consistent power and defends your gear against damage from spikes and surges.

Furman PL-Plus C Power Conditioner
Furman PL-Plus C Power Conditioner

collapse expand iconFeatures

  • Retractable LED rack lights with on/off/dimmer control
  • Isolated outlet banks to minimize inter-component interference and noise contamination
  • BNC back panel connector for gooseneck lamp with front-panel switch
  • Maintenance-free surge suppression thanks to Series Multi-Stage Protection Plus (SMP+) circuit with extreme voltage shutdown
  • 8 rear-panel outlets and one front-panel outlet
  • LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised
  • Three widely spaced outlets accommodate bulky AC power transformers
  • LiFT (Linear Filtering Technology) with zero ground contamination
  • Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions
  • Segmented LED Voltmeter monitors and displays incoming line voltage
  • 15 amp rating, with high-inrush thermal circuit breaker for added protection
  • Two, pull out multi-LED, dimmable lamps
  • Captive 3/14 AWG, 10ft. black cord with NEMA 15 plug
  • One rack unit space
  • Master switch control of rear outlets

collapse expand iconSpecs

  • Dimensions: 19"W x 1.75"H x 10.5"D
  • Weight: 12 lbs.
  • Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
  • Current rating: 15 amps
  • Operating Voltage: 90 to 139 VAC
  • Over Voltage Shutdown: 140 VAC typically
  • Spike Protection Modes: Line to neutral, zero ground leakage
  • Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS
  • Response time: 1 nanosecond
  • Maximum surge current: 6,500 amps
  • Noise attenuation: 10dB @ 10kHz, 40dB @ 100kHz, 50dB @ 500MHz
  • Power consumption: 12W
  • Safety Agency Listings: CE, NRTL-C