Providence

Description

The Red Rock Overdrive delivers warm overdrive with plenty of sustain for a wide-ranging expressive voice ideal for use with single-coil pickups. However, an input gain section that is similar to guitar amp circuits allows level compensation for pickups of differing output as well as boost.

FAT Switch
A FAT switch that boosts the low frequencies can be used to deliver an even fatter, more powerful sound.

Wide Dynamic Range
Internal circuitry doubles the 9-volt supply voltage to 18 volts, achieving wider dynamic range than conventional overdrive effects.

S.C.T Circuit
In standard "true bypass" circuits the instrument signal passes through two switch contacts when bypassed. The ROD-1 Single Contact True Bypass configuration ensures that the signal only passes through one switch contact when bypassed, for unmatched signal quality as well as reliability.

D.C.G. Circuit
Due to the adoption of the new double-contact grounding circuit (D.C.G. Circuit), by inserting a monaural plug into the output jack, the shield (sleeve) of the plug provides two points of contact to the pedal's ground circuit. By increasing the area of the point of contact, it becomes more difficult for a loose connection to occur, and provides the additional advantage of improved sound quality.

Multi-function LED
In addition to indicating the pedal's on/off status, the ROD-1 LED provides effective visual battery power monitoring. When the battery voltage drops below 7 volts the LED will become dimmer and begin to go out. The effect will still operate at this voltage, but to ensure optimum performance the battery should be replaced as soon as possible.
Features
  • Warm overdrive tones ideal for single-coil pickups
  • Input gain section allows level compensation
  • FAT Switch boosts low frequencies
  • Wide Dynamic Range
  • S.C.T Circuit and D.C.G. Circuit
  • Multi-function LED