- Popular Brands
Top-Seller
Proline Amp Stand


Description
Find the Optimal Angle
Whether you’re placing your guitar amp on this stand in the studio or the stage, it provides all the flexibility you need to get just the right fit. With its five height adjustment settings, you can find the optimal angle onstage or in the studio.
Rubber Pads
The Proline PLAS1 amp stand features rubber pads to protect your amp from normal wear and tear.
Advanced Design
The Proline PLAS1 amp stand features an advanced design that makes it super easy to quickly breakdown after the gig or session. It’s also designed to be convenient to take with you from show to session, and store at home when you’re not using it. The forks height is adjustable from 16.9" to 24" and the distance between the forks is 11.8". Proline makes a wide range of affordable accessories and replacement parts that are designed for the working musician. This well-built amp stand can hold amps up to 130 lb. and is ready to hit the road, wherever the music takes you.

Features
- Handles amps up to 130 pounds
- Height adjustable from 16.9” to 24” (430mm - 610mm)
- Distance between forks 11.8” (300mm)
WARNING: This product can expose you to chemicals including Cadmium, which is known to the State of California to cause cancer, and Cadmium, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Featured Articles
Reviews
4.83
94 Reviews
99%
of respondents would recommend this to a friend
Most Liked Positive Review
Good value -
This is my second ProLine amp stand. Guitar Center shipped it double boxed - nice touch, because it arrived undamaged in the original carton. After tightening all screws & nuts, this stand is awesome! Sturdy & stable (I use mine in the lowest position), and folds up nicely for storage after the gig or rehearsal. The added bracing between the two legs on both sides is a PLUS to this ProLine product. Highly recommended - bought it on sale, online, from Guitar Center, with free shipping to my door. Very cool!
Most Liked Negative Review
I would do more research!!
I bought this stand for my Markbass 2x10 combo amp. I had to buy a 20lb dumb bell for the back leg supports because I was concerned about it "tipping" forward. It's a well built unit, just not for this amp. Maybe should'a done a bit more research. My amp is a "tilt" and "flat" type unit. That could be the problem. Make sure your amp will ride securely on this stand. If it does, you'll be happy. What I'm saying is: SHOP!!!
- Home Studio58
- Performances58
- Outdoor Events / Games29
- Professional Recording19
- Amateur Recording16
- Difficult To Transport4
- Heavy / Bulky2
- Not Functional1
- Unstable1
- None!1
- Experienced48
- Professional Musician21
- Novice11
- Stable72
- Holds Items Securely68
- Portable57
- Compact52
- Very Affordable reliable product1
Reviewed by 94 customers
Perfect for my Blues Junior !
submitteda month ago
byArmando
fromChicago, Illinois
This thing was just the thing I was looking for for my Blues Junior! Simple! Nothing more, nothing less!
Proline stand works perfectly!
Verified Buyer
submitted6 months ago
byEric
fromLake Forest
Submitted as part of a sweepstakes
I use a small amp (Mesa Rocket) and I wanted an amp stand to make it easier to get to my control panel. I looked at several and this one fit the bill. Not cheap, but definitely not the most expensive either. Got a good deal on it as it was out of the box. I use it everyday
Good, sturdy stand for my needs.
Verified Buyer
submitted7 months ago
bySteve
fromFort Worth, Texas
Submitted as part of a sweepstakes
I needed a stand to raise my amp to hear it more clearly. This unit works great. The height is adjustable and it's been super stable.
Great for practicing
Verified Buyer
submitted7 months ago
byRichie
fromOklahoma City, Oklahoma
Submitted as part of a sweepstakes
I use this everyday at practice and at shows. Works great!
Great amp stand for my studio
Verified Buyer
submitted7 months ago
byWilliam
fromCanton, Michigan
Submitted as part of a sweepstakes
Use in my home studio to get amp at a better ear level
Yes this my forth one buy again
Verified Buyer
submitted9 months ago
byCharles
fromMiddletown ny
Submitted as part of a sweepstakes
Sets up fast and is very sturdy
Q&A
Have a question about this product? Our expert Gear Advisers have the answers.
submitteda month ago
asked byWayne
fromCorpus Christi, TX
Hard to tell from the pictures, but it appears to have a slight tilt?
Yes, it does.submitteda year ago
asked byKevin
fromDallas, OR
Will the Proline Amp Stand work with a Fender Hot Rod Deluxe III?
Yes, it will.submitteda year ago
asked byRob
fromLas Vegas
Anyone know if this will fit a Vox AC10C1?
Hello! It most certainly will!submitted2 years ago
asked bySgt Pepper
fromundisclosed
Will this support the weight of a Vox AC15, about 50 pounds?
Yes it willsubmitted3 years ago
asked byBill W.
fromSpokane, WA
Is the tilt adjustable? I haven't really seen that described in specs or in reviews.
No, it isn’t.submitted3 years ago
asked byDeciding Factors
fromNJ
Adjustable height says it raises from 16.9" to 24". Is the 24" mark measured to the very top of the back of the stand? Or is the 24" measured to the top of the bracket where the amp actually sits on? Also, what is the width of the brackets that the amp actually sits on, outside to outside?
Forks height adjustable from 16.9″-24″ (430mm-610mm) • Distance between the forks: 11.8″ (300mm)submitted3 years ago
asked byJoe
fromOradell, nj
Will this hold a Roland kc600 keyboard amp safely?
Yessubmitted3 years ago
asked byD
fromundisclosed
Good Afternoon! Would the DV Mark 2x12 Neoclassic Speaker Cabinet, fit on this stand?
Yessubmitted3 years ago
asked byDan
fromDundee Mi.
What's the width measurement for where the amp sits?
Distance between the forks: 11.8″ (300mm)submitted3 years ago
asked byRandy
fromTaylors, SC 29687
What is the distance between the two bars that hold the amp on this amp stand? I have a Peavy Bandit and it's width is ~20 inches.
"Distance between forks 11.8” (300mm)"